Tutorials on Stepper Motor
Control 28BYJ-48 Stepper motor with hand gesture using Arduino
This video shows you how to control stepper motor with the gesture of your hand. Rotate it clockwise...
Lesson 107-8: Controlling the Speed of a 28BYJ-48 Stepper Motor Using a Potentiometer
Project 8: Controlling Stepper Motor Using a Potentiometer – 28BYJ-48 Stepper MotorThis article pres...
Lesson 107-7: Sending a 28BYJ-48 Stepper Motor to Any Angle with Defined STPB-5 Push Buttons
Project 7: Multiple Buttons for Angle, Speed, and Direction – Using STPB-5 – 28BYJ-48 Stepper MotorT...
Lesson 107-6: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons, with Angle and Speed STPB-4
Project 6: Variable Angle and Speed Using Push Button STPB-4 – 28BYJ-48 Stepper MotorThis article co...
Lesson 107-5: Send 28BYJ-48 Motor for One Revolution in CW or CCW Direction, STPB-3
Project 5: One Revolution Triggered Using Push Button STPB-3 – 28BYJ-48 Stepper MotorThis article is...
Lesson 107-3: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons: CW, CCW, and Stop (STPB-1)
Project 3: Controlling Stepper Motor Using Push Button STPB-1 – 28BYJ-48 Stepper MotorThis article i...
Lesson 107-2: Controlling a 28BYJ-48 Stepper Motor via Serial Monitor
Project 2: Controlling Stepper Motor via Serial Monitor – 28BYJ-48 Stepper MotorThis article is the ...
Lesson 107-1: Start and Stop the 28BYJ-48 Stepper Motor with Direction Set in Code
Project 1: Basic Motor Control – 28BYJ-48 Stepper MotorThis article is part of a comprehensive video...
Lesson 110-1: 74HC595 8-LED Light Line
This code is to introduce the 74HC595 to drive 8 LED lights and turn them on from 0 to 8 one by one ...
ESP8266-Based Control of a 28BYJ-48 Stepper Motor via WiFi and Mobile Phone
This video shows how to send data to a Stepper Motor 28BYJ-48 using an ESP8266 NodeMCU or D1 Mini ov...
ESP32-Based WiFi Control of a 28BYJ-48 Stepper Motor
This tutorial shows you how to control a stepper motor with a ULN2003 to send it to any angle, direc...
STPB-5: Controlling a 28BYJ-48 Stepper Motor with Push Buttons to Any Angle
This is the Arduino code to control the 28BYJ-48 stepper motor with push buttons to send it to any a...
