Pixhawk PX4 2.4.6 Flight Controller with M8N GPS + complete kit Pixhawk PX4 2.4.6 Flight Controller with M8N GPS + complete kit
Pixhawk PX4 2.4.6 Flight Controller Pixhawk PX4 2.4.6 Flight Controller
Pixhawk-I2C Splitter Expand Module Pixhawk-I2C Splitter Expand Module
PPM module PPM module
Pixhawk saftey button Pixhawk saftey button
Pixhawk saftey button Pixhawk saftey button
Pixhawk saftey button Pixhawk saftey button
RGB RGB
GPS Receivers with Stand GPS Receivers with Stand
Power Module Power Module
Pixhawk PX4 2.4.6 Flight Controller Pixhawk PX4 2.4.6 Flight Controller

Pixhawk PX4 2.4.6 Flight Controller with M8N GPS + complete kit

  • Part numberFCT-00085
  • Stock Sold out
For Information only. Not available to sell.

Share this page

What's included

  • What's included
  • Pixhawk px4 2.4.6 32 bit ARM Flight Controller1x
  • Original shell1x
  • Buzzer1x
  • Safety button1x
  • PPM module1x
  • External LED light board(with USB function)1x
  • Pixhawk-I2C Splitter Expand Module1x
  • Ublox NEO-M8N GPS Module1x
  • GPS Module Folding Holder1x
  • MicroSD Card (IO firmware has written)1x
  • Power Module (XT60 connector)1x

Product Description

Pixhawk 2.4.6 Description:

- SD card base adopts deadlock function. SD card will not be easily taken out unless press the SIM
- The front jacks all adopts imported the gilded needle, has better contact resistance, more stable and reliable
- NEC original tantalum capacitor is added in back compass and main power supply, making each sensor has stable power supplying and lesser possibility of aircraft crashing
- The same matte black gold plate as the original version, high quality
- PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high

Features:
- with external LED -Dual Size full angle LED
- Advanced 32 bit ARM CortexM4 high performance processer, can operate NuttX RTOX real time operation system
- 14 PWM/ Servo Output
- Bus interface(UART,I2C,SPI,CAN)
- Intergrated back up power and lose efficacy controller, main controller lose efficacy can safely alter to back up control
- Providing automatic and manual mode
- Providing redundant power supply input and failover
- Multicolor LED light
- Providing multi sound buzzer interface
- Micro SD records flying data

Hardware parameters

Processor:
- 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
- Main frequency: 168MHZ,256K RAM
- 32 bit STM32F103 back up processor

Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis 14 acceleration/magnetometer
- MPU6000 6 axis acceleration/magnetometer
- MS5611 high precision barometer

Interface:
- 5 UART, one compatible high voltage, two have hardware flow control
- Two CAN
- Spektrum DSM/ DSM2/ DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI(PWM or voltage) output
- I2C
- SPI
- 3.3 and 6.6VADC input
- External MICRO USB interface

NEO-M8N GPS Specification:
- NEO-M8N has low consumption high precision  0.6m, most are about 0.9m according to tests
- Compared to NEO-7N 1.4-1.6m, the precision has been greatly improved, and support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1
This is not ordinary cheap GPS module. It worth $60.


Power Module with XT-60 Connector

pixhauk

  • What's included
  • Pixhawk px4 2.4.6 32 bit ARM Flight Controller1x
  • Original shell1x
  • Buzzer1x
  • Safety button1x
  • PPM module1x
  • External LED light board(with USB function)1x
  • Pixhawk-I2C Splitter Expand Module1x
  • Ublox NEO-M8N GPS Module1x
  • GPS Module Folding Holder1x
  • MicroSD Card (IO firmware has written)1x
  • Power Module (XT60 connector)1x

Related Videos

Download

File Title

Download

Pixhawlk IO firmware