Matek PDB-XT60 Power Distribution board w/BEC 5V, 12V Matek PDB-XT60 Power Distribution board w/BEC 5V, 12V
Matek PDB bottom view Matek PDB bottom view
Matek PDB bottom view Matek PDB bottom view
Matek PDB XT60 diagram X Matek PDB XT60 diagram X
Matek PDB XT60 diagram X Matek PDB XT60 diagram X
Matek PDB XT60 diagram X Matek PDB XT60 diagram X

Matek PDB-XT60 Power Distribution board w/BEC 5V, 12V

46
  • Part numberPOW-00423
  • Stock 46 Sold out
For Information only. Not available to sell.

Share this page

What's included

  • What's included
  • Matek PDB-XT60 Power Distribution board w/BEC 5V, 12V1x

Product Description

This Power distribution board is for Quadcopter with neat connection and built in 5V and 12V BEC voltage.

 General:
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 6 ESC outputs & 1 pair VCC/GND pads
 
ESC outputs:
- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
 
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)  
 
BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)
 
BEC 12V @ 3S LiPo
- Output voltage= 3S LiPo voltage -1V
 
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)

  • What's included
  • Matek PDB-XT60 Power Distribution board w/BEC 5V, 12V1x

Related Videos

Download

No file found for download