UBlox 6M GPS Receiver with Campus for APM

These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.

    Super Bright LED
    BlackPlane with Standard Mk style mounting holes 45mm X 45mm
    Blox Neo 6M Chipset
    38400 bps (Default) Changed to 115200bps !
    Output GGA, GSA and RMC frames
    1Hz (Default) Changed to 5Hz!
    Permanent Configuration Retention
    Cable included

+ Moved LED to the Top
+ Bigger battery
+ compass on board
+ 6 pin connector for EZ connect to MEGA BLACK
+ 4 pin connector for onlyGPS use
+ 4 pin connecton for compass only use
+ GPS "PCB HOOD" for More EMI/RFI Shielding

can use both 4 pin at once

The GPS unit is per-configured for multiwii !! Unlike other shops send it out default settings, and yet you figure it out.

pre tested = PLUG AND PLUG for MWC 2.1!

MultiWii GPS assited Position Hold and RTH functions

NEO-6M Ublox u-blox GPS Module with on-board compass HMC5883l (compass) (mag)    

Description:    

- Main chip:U-BLOX NEO-6M
- C/A code,1.023MHz
- Receiver Frequency:L1 [1575.42MHz]
- Locate performance
- 2D :3m(Average)
- 2D:2m(average),with WAAS
- drifting<0.02m/s
- accuracy:1us
- coordinate system:WGS-84
- max attitude height:18000
- Max speed:515m/s
- accerlaration:<4g

Specification:
- tracking sensitivity:-161dBm
- Capture sensitivity:-148dBm
- cold start time:38s average
- Warm start time:35s average
- hot start time:1s average
- Capture time:0.1s Average
- Temperature:40 to +80
- wide power supply voltage:+3.5V~+5.5V

Ublox GPS Module V2.0

This is White GPS Module.

Stand color can vary. Silver, Black or Magenta or some other color based on stock availibility will be shipped.

If you need particular color, confim before placing order.