Показано 241-252 из 252 продуктов

USB to RS232 TTL UART PL2303HX adapter cable
Built-in TTL COM PC-PL2303HX Chip Standard USB type A male and TTL 4-pin connector Simple and easy way to give USB support to your designs Availa...

2 pieces 5V active continuous buzzer 12mm x 10mm
Diameter: 12mm. Length: 10mm. Input Voltage: 3.5-5.5V. Current: <25mA. Frequency: 2300 +/-500Hz.
5 pairs 28mm alligator clips
Silver alligator clips. Solder your wires and make connections between two points.

Mini USB Male to USB 2.0 Female 90-degree Right Angle
Mini USB Male to USB 2.0 Female 90-degree Right Angle UL2725 copper wire

Mini DC-DC 2A Converter, Step-Down, Adjustable
This is a great module to convert 12V to 5V or any other voltage between 1.5V and 16V. Rated current is 2A. With an added heat sink, it can suppl...
TTL USB 2.0 to 6-pin CH340G Converter for STC Arduino Pro
TTL USB 2.0 to 6-Pin CH340G Converter for STC Arduino Pro

10 pieces 2N2222 NPN transistors and 10 pieces 2N2907 PNP transistors
NPN General-Purpose Amplifier up to 500 mA current TO-92 package Please view and download the datasheet under the "Download" link.

USB 2.0 to TTL UART module, 5-pin serial converter CP2102
Need to install drivers -Color: Like the picture shown -Quantity: 1 pc -Temperature Range: -40° to +85° -Baud rates: 300 bps to 1.5 Mbps...
PL2303 USB-to-RS232 TTL Converter Adapter Module
All kinds of satellite set-top box upgrades The router, hard disk, ADSL, broadband, etc., can have their firmware updated or cracked. Cell p...
L298 dual full-bridge driver L298 Multiwatt 15
The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 package. It is a high-voltage, high-current dual full-bridge dr...

2-pcs 40-pin 1x40 single-row male 2.54 breakable pin header connector
40-Pin 1x40 Single-Row Male 2.54mm Breakable Pin Header Connector Strip for Arduino 1x40 Male 2.54 breakable pin header Package: DIP 40

FTDI USB 3.3V/5.5V to TTL Serial Adapter Module
To connect your devices such as Gimbal, Arduino, and any other device that needs to be programmed or controlled by computer. Easy to configure and...