Overcurrent Protection with Winson WCS Current Sensors and an Arduino LCD
This tutorial by Robojax explains how to use a Winson WCS Current sensor to measure DC current and use a relay as overcurrent protection so the current is disconnected when the current reaches the threshold value set in the code. The Robojax WCS Library is used to measure current. This code will work with all Winson WCS Current sensors.
This video requires the Robojax WCS Library to be installed. The link is below.
This code is offered as 3 sketches:
- Overcurrent Protection with LCD
- Overcurrent Protection with LCD and powering up the LCD from a digital pin
- Overcurrent Protection without LCD
This code is included with the library. You don't have to download it from this page. Just download the library; this code is included.
画像
LCD displaying the current
Full setup with LCd
Winson Current Sensor
WCS3740
WCS3740
WCS3740
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
348-Arduino code for Winsen WCS Current Sensor with LCD
言語: C++
コピーしました！
必要かもしれないもの
-
アマゾンAmazonでWCS1800ホール電流センサーを購入するamzn.to
-
イーベイeBayからESP32-S3 RGBマトリックスを購入するebay.us
-
イーベイeBayからWCS1800ホール電流センサーを購入するebay.us
-
アリエクスプレスAliExpressからWCS1800ホール電流センサーを購入するs.click.aliexpress.com
リソースと参考文献
-
外部WCS1500winson.com.tw
-
外部WCS1600winson.com.tw
-
外部WCS1700winson.com.tw
-
外部WCS1800winson.com.tw
-
外部WCS2702winson.com.tw
-
外部WCS2705winson.com.tw
-
外部WCS2720winson.com.tw
-
外部WCS2800winson.com.tw
-
外部WCS2801winson.com.tw
-
外部WCS2810winson.com.tw
-
外部WCS3740winson.com.tw
-
外部WCS37A50winson.com.tw
-
外部WCS38A25winson.com.tw
-
外部WCS6800winson.com.tw
ファイル📁
他のファイル
-
RoboJax WCSライブラリをダウンロード
robojax_Winson_WCS_library.zip0.04 MB
