Overcurrent Protection with Winson WCS Current Sensors and an Arduino LCD
This tutorial by Robojax explains how to use a Winson WCS Current sensor to measure DC current and use a relay as overcurrent protection so the current is disconnected when the current reaches the threshold value set in the code. The Robojax WCS Library is used to measure current. This code will work with all Winson WCS Current sensors.
This video requires the Robojax WCS Library to be installed. The link is below.
This code is offered as 3 sketches:
- Overcurrent Protection with LCD
- Overcurrent Protection with LCD and powering up the LCD from a digital pin
- Overcurrent Protection without LCD
This code is included with the library. You don't have to download it from this page. Just download the library; this code is included.
Immagini
LCD displaying the current
Full setup with LCd
Winson Current Sensor
WCS3740
WCS3740
WCS3740
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
348-Arduino code for Winsen WCS Current Sensor with LCD
Lingua: C++
Copia!
Cose di cui potresti avere bisogno
-
Amazon
-
eBay
-
AliExpressAcquista il sensore di corrente Hall WCS1800 su AliExpresss.click.aliexpress.com
Risorse e riferimenti
-
EsternoWCS1500winson.com.tw
-
EsternoWCS1600winson.com.tw
-
EsternoWCS1700winson.com.tw
-
EsternoWCS1800winson.com.tw
-
EsternoWCS2702winson.com.tw
-
EsternoWCS2705winson.com.tw
-
EsternoWCS2720winson.com.tw
-
EsternoWCS2800winson.com.tw
-
EsternoWCS2801winson.com.tw
-
EsternoWCS2810winson.com.tw
-
EsternoWCS3740winson.com.tw
-
EsternoWCS37A50winson.com.tw
-
EsternoWCS38A25winson.com.tw
-
EsternoWCS6800winson.com.tw
File📁
Altri file
-
Scarica la libreria RoboJax WCS
robojax_Winson_WCS_library.zip0.04 MB
![UNO R4 Minima [ABX00080] - Renesas RA4M1 - USB-C, CAN, DAC (12 Bit), OP AMP, SWD](https://i.ebayimg.com/images/g/-gUAAOSw3AxoQG3I/s-l225.jpg)
