To print telemetry data on the video before transmitting it to FPV for a Naze32 Flight Controller board

Features:
- Onboard 5V and 12V switching power supplies.
- Direct connections to Naze when stacked.
- Cam and VTX 3-pin headers with selectable 12V or 5V power from onboard regulators.
- Can power Naze and anything else attached to Naze, so you can disconnect the red power wire from all ESCs.
- Onboard micro-USB plug for flashing/configuring your favorite OSD software. Anything that works on MinimOSD will also work on this.
- Voltage dividers for both battery sources (main battery/video battery voltage sensors).
- Series protection resistors for RSSI and current sensor connections. RSSI can be filtered from high-frequency PWM into an analog signal by enabling the RSSI filter solder jumper.
- Extremely bright, blinding LEDs.

Specification:
- With straight pins and side pins; please solder them yourself.
- For Naze 32

Required:

You need an FTDI or some other USB interface to program this. Have a look at the related products on the right.