FPV Combo kit includes LCD Monitor, TX, RX, Camera, LCD Mount, and Sun hood.

This is everything you need to start using your drone as FPV (first-person view).

1-LCD Monitor:

No blue screen when losing signal
• 7.0 inch TFT LCD Display
• Ideal for use with FPV
• 800 x 480 High Resolution Display
• LED Backlight
• 16:9 Display Ratio
• 15ms Response Time
• 500:1 Contrast Ratio
• Wide 6~18V DC Input Voltage Range

LCD Monitor Specs:
Panel Size: 7.0 inch
Panel Type: TFT LCD
Resolution: 800x480
Backlight: LED
Horizontal Frequency Range: 30~60kHz
Field Frequency Range: 50~75Hz
Dot Pitch: 0.0642 (W) x 0.1790 (H) mm
Display Ratio: 16:9
Brightness: 400 cd;
Contrast Ratio: 500:1
Response Time: 15ms
Viewing Angle: 70°/70° (L/R) 50°/60° (U/D)
Input Voltage: DC 6~18V
Power Consumption: ≤ 5W
Working Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Dimensions: 182 x 127 x 32mm
Weight: 363g

2-Camera:

Product Name: Boscam800
Product Weight: 13g
Size: 35 * 35 * 35mm (not including bracket)
Imaging System: 800TVL 170 Degree 2.1MM line color
Support format: PAL mode (supports by the monitor)

3-Transmitter TS351:

5.8G 200mW AV wireless receiver and transmitter TS351

Features of 5.8G 200mW AV wireless receiver and transmitter:
5.8G 8ch transmitter
With channel DIN-switch to change channels

Specifications of 5.8G 200mW AV wireless receiver and transmitter:
Transmitter frequency:5705-5945MHz;8CH
Transmitting Power:200mW/23dBm
Transmitting distance:>2000m(open area)
AV input:analog AV signal input
power supply:6.5-15 volts
Current supply:200mA
Size:55*26*17mm
Remark:The transmitter's power input ranges from 7-12V; however, the voltage output from the TX for the camera is 0.5V, lower than the input power. It is suggested to use a 3S lipo 11.1V battery.
Note: Antennas must be attached before powering on.

Default: Antenna connector:SMA(Inside the needle)

Frequency of each channel:
CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645
CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945

4-Receiver Boscam RC805:

Receiving frequency:5725-5865MHz;8CH
Receiving sensitivity:-90dBm
Double lines AV output:analog AV signal output
Power supply voltage: 8-12V
Supply current: 100mA
Dimension: 75*54*15
Remark:The receiver's power input ranges from 8-12V, and dual AV output is supported.
AV cable: 3.5mm plug on the receiver
Default: Antenna connector:SMA(Inside the needle)

Frequency of each channel:
CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645
CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945

5-Monitor mount support Features:

Material: 2mm Glass Fiber.
Suitable for the transmitter, and display mast have fixed nuts.
Lightweight, High strength.
Suitable for 7-inch or 8-inch monitors.
Compatible with Futaba 9c 10c JR 9c WFLY transmitters, etc.

Specifications:
Total weight: 60g / 2.1oz

6-Sun hood.

A very large and 15cm deep sun shade made of fabric with internal support to hold it.