Yadda ake saitawa da amfani da Eachine TX03 3-in-1 FPV Transmitter da Camera

Yadda ake saitawa da amfani da Eachine TX03 3-in-1 FPV Transmitter da Camera

A cikin wannan jagorar, za mu yi nazari mai zurfi kan Eachine TX03, wani tsarin FPV (First-Person View) mai ƙarami kuma mai amfani wanda ya haɗa kyamara mai faɗin kusurwa 600TVL, mai watsa bidiyo na 5.8GHz, da eriya mai ganye mai huɗu a cikin na'ura ɗaya mai sauƙi. Tare da nauyin gram 5 kawai, wannan ƙaramin na'urar an tsara shi ne don ayyukan da kowane gram ke da muhimmanci, kamar ƙananan jiragen FPV, motocin RC, da ƙananan robotics.

TX03 ba kawai kyamara ba ne; cikakken tsarin watsa bidiyo ne. Ƙimar sa ta gaske tana cikin sassauƙa da sauƙin amfani. Saboda yana aiki a kan kewayon wutar lantarki mai faɗi (2.5V zuwa 5V), za ka iya kunna shi kai tsaye daga batirin LiPo mai cell ɗaya ko kuma daga tushen 5V mai sarrafawa. Wannan ya sa ya zama zaɓi mai kyau ga ayyuka daban-daban, ciki har da:

• Gina ƙaramin jirgin FPV: Sauƙin nauyinsa da ƙarancin amfani da wutar lantarki ya sa ya dace da ƙananan quadcopters irin su whoop.
• Ƙirƙirar motar tsaro ko lura mai nisa: Yi amfani da shi a kan rover don bincika wurare da watsa bidiyo kai tsaye zuwa allonka.
• Ƙara hangen nesa na farko ga motocin RC da jiragen ruwa: Fahimci jin daɗin tuƙi daga cikin motar.
• Gwada tsarin watsa bidiyo mara waya: Ƙarfin fitarwa da za ka iya zaɓa (25mW, 50mW, 200mW) yana ba ka damar daidaita nisa da rayuwar batir.

A cikin wannan labarin, za mu bincika fasalulluka na TX03, mu koyi yadda ake saita tashoshi da ƙarfin fitarwa, da kuma nuna yadda ake samun bidiyo kai tsaye a kan mai karɓar FPV na yau da kullun.

Bayanin Hardware

Eachine TX03 na'ura ce mai zaman kanta. Kunshin ya haɗa da kyamara/mai watsa bidiyo, kebul na wutar lantarki, da eriya mai ganye mai huɗu. An riga an haɗa eriyar a kan allo, wanda ke da sauƙi amma yana nufin ba za a iya maye gurbinsa ba idan ta lalace a cikin haɗari (a cikin bidiyo a 03:21).

Kyamara tana da nunin OLED da aka gina a ciki wanda ke nuna mahimman bayanai kamar tashar yanzu, band, da ƙarfin fitarwa. Wannan nunin akan allo (OSD) yana da matuƙar taimako don saitawa da magance matsaloli, saboda za ka iya ganin saitunanka ba tare da buƙatar kayan aiki na waje ba (a cikin bidiyo a 02:26).

Jagorar Haɗin Waya

Haɗin waya na TX03 yana da sauƙi sosai. Tun da mai watsa yana aiki a kan kewayon wutar lantarki na 2.5V zuwa 5V, za ka iya kunna shi kai tsaye daga batirin LiPo mai cell ɗaya (wanda ke ba da kusan 3.7V zuwa 4.2V) ko kuma daga tushen 5V mai sarrafawa (a cikin bidiyo a 00:43).

Modul ɗin yana zuwa da kebul na wutar lantarki da aka riga aka haɗa. Don haɗa shi, kawai ka haɗa wayar ja zuwa ƙarshen tabbataccen tushen wutar lantarki da wayar baƙar fata zuwa ƙasa (marasa tabbaci). A cikin bidiyon, an yi amfani da batirin LiPo mai cell ɗaya na 250mAh don gwaji (a cikin bidiyo a 02:14).

Idan akwai zanen haɗin waya, za a nuna shi a ƙasa.

Saitin Mai Watsa

Duk saituna ana yin su ne ta hanyar maɓallin turawa ɗaya da ke kan kyamara. Halin maɓallin yana canzawa bisa ga tsawon lokacin da ka danna shi (a cikin bidiyo a 04:00).

Canza Tashoshi da Bands

TX03 yana da tashoshi 40 da aka rarraba a cikin bands 5 (A, B, E, F, R). Don canza tashar a cikin band, danna maɓallin a takaice. Misali, ɗan gajeren dannawa zai juya daga tashar 4 zuwa 5, sannan zuwa 6, da sauransu (a cikin bidiyo a 04:11).

Don canza band, danna kuma riƙe maɓallin na kusan daƙiƙa biyu. Nunin zai fara walƙiya da harafin band. Yayin da yake walƙiya, ɗan gajeren dannawa zai juya ta cikin bands (A, B, E, F, R). Bayan ƴan daƙiƙai na rashin aiki, za a adana saitin kuma nunin ya koma al'ada (a cikin bidiyo a 04:27).

Daidaita Ƙarfin Fitarwa

Ƙarfin fitarwa za a iya saita shi zuwa 25mW, 50mW, ko 200mW. Don canza wannan, danna kuma riƙe maɓallin na kusan daƙiƙa biyar. Nunin zai nuna alamar layi wanda ke wakiltar matakin ƙarfin: layi ɗaya don 25mW, layi biyu don 50mW, da layi uku don 200mW. Ɗan gajeren dannawa yana juya ta cikin waɗannan matakan, kuma ana adana saitin bayan ƴan daƙiƙai (a cikin bidiyo a 05:34).

Nunin Kai Tsaye

Don gwada TX03, an yi amfani da mai karɓar FPV na yau da kullun. An saita mai karɓar zuwa band da tashar ɗaya da mai watsa. A cikin bidiyon, mai watsa yana kan Band A, Tashar 3. Da zarar an daidaita mai karɓar zuwa mitar ɗaya, an nuna bidiyo mai faɗin kusurwa a kan allo (a cikin bidiyo a 06:39).

Nunin ya nuna cewa ko da a mafi ƙarancin ƙarfin fitarwa (25mW), siginar bidiyo yana da ƙarfi don gwaji na kusa. Lens mai faɗin kusurwa yana ba da faɗin gani mai faɗi, wanda ya dace da aikace-aikacen FPV inda fahimtar yanayi ke da muhimmanci (a cikin bidiyo a 07:14).

Fahimtar Tashoshin FPV

Ana rarraba tashoshin FPV zuwa bands (A zuwa H). Duk da haka, ba duk tashoshi ne suka dace da kowane mai karɓa ba. Wasu mitoci suna kusa da juna sosai, kuma za ka iya buƙatar gwaji don nemo tashar da mai karɓanka zai iya ɗauka. TX03 yana ba ka damar zaɓar kowane ɗayan tashoshinsa 40, yana ba ka sassauƙa don nemo mitar da ta fi dacewa da tsarinka na musamman (a cikin bidiyo a 07:54).

Babuka

• [00:05] Gabatarwa ga Eachine TX03
• [01:07] Buɗe Akwati da Abubuwan Ciki
• [02:02] Fasalulluka na Kyamara da Nunin OSD
• [03:32] Kunna Wuta da Saitin Farko
• [04:00] Canza Tashoshi da Bands
• [05:34] Daidaita Ƙarfin Fitarwa
• [05:56] Gwajin Kai Tsaye tare da Mai Karɓar FPV
• [07:54] Fahimtar Tashoshi da Bands na FPV
• [08:43] Ƙarshe da Tunani na Ƙarshe