Bayani na Haɗin Waya na CC3D Flight Controller

Bayani na Haɗin Waya na CC3D Flight Controller

Wannan jagorar tana ba da cikakken bayani kan yadda ake haɗa CC3D flight controller zuwa muhimman sassanta: Electronic Speed Controllers (ESCs), mai karɓa, da kuma power distribution board. Fahimtar waɗannan haɗin yana da mahimmanci don gina da sarrafa jirgin sama mai injuna da yawa. Wannan aikin yana da amfani ga duk wanda ke gina ko gyaran drones, tsarin daukar hoto daga sama, ko wasu aikace-aikacen multirotor.

Kayan aiki/Abubuwan da ake bukata

Don kammala wannan aikin, za ku buƙaci waɗannan abubuwan (a cikin bidiyo a 00:19):

• CC3D Flight Controller
• Electronic Speed Controllers (ESCs)
• Mai karɓa (misali, Orange RX, RadioLink R9D, FlySky FS-iA6)
• Power Distribution Board (nau'i biyu an nuna su a cikin bidiyo)
• Igiyoyin haɗi (ciki har da XT60 connector da Dupont wires)
• Ƙarfe mai narkewa da solder
• Baturi

Jagorar Haɗin Waya

Bidiyon yana nuna yadda ake haɗa kowane abu mataki-mataki. An ba da cikakkun umarni game da soldering da haɗa wayoyi masu kyau da marasa kyau zuwa power distribution board (a cikin bidiyo a 02:14). An nuna tsarin haɗa ESCs zuwa duka power distribution board da flight controller, tare da jaddada mahimmancin kada a haɗa wayoyi masu kyau da marasa kyau a kuskure (a cikin bidiyo a 03:09). Bidiyon kuma yana bayyana yadda ake haɗa wutar 5V zuwa flight controller, yana nuna bambance-bambance tsakanin ESCs masu da ko marasa tsarin daidaita wutar 5V na ciki (a cikin bidiyo a 07:07). A ƙarshe, yana dalla-dalla yadda ake haɗa wayoyi na masu karɓa daban-daban, yana jaddada mahimmancin gane wayoyi masu kyau, marasa kyau, da na sigina da kuma haɗinsu zuwa tashoshi masu dacewa a kan flight controller (a cikin bidiyo a 13:57).

Aiki na Kai Tsaye/Nunawa

Bidiyon yana ba da nunin kai tsaye na duk tsarin haɗin waya, daga haɗa power distribution board zuwa haɗa ESCs da mai karɓa tare da CC3D flight controller. Mai gabatarwa yana bayyana kowane mataki dalla-dalla, yana nuna matsalolin da za su iya faruwa da kuma ba da mafita. Bidiyon ya ƙare ta hanyar gwada tsarin, yana nuna cewa flight controller da mai karɓa suna samun wutar daidai (a cikin bidiyo a 19:48).

Babuka

• [00:03] Gabatarwa da Bayanin Aiki
• [00:19] Haɗin Power Distribution Board
• [03:07] Haɗa ESCs
• [06:34] Bayanin Power Distribution Board
• [07:07] Wutar 5V don Flight Controller
• [13:57] Haɗa Mai Karɓa
• [19:48] Nunin Kai Tsaye da Gwaji
• [23:33] Ƙarshe