A matsayin bayanin allon rarraba wutar lantarki na Drone (PDB)

A matsayin bayanin allon rarraba wutar lantarki na Drone (PDB)

Wannan jagorar aikin ta bayyana yadda ake amfani da allunan rarraba wutar lantarki (PDBs) a cikin gina jiragen sama marasa matuki. PDBs suna sauƙaƙa haɗin wayoyi da sarrafa wutar lantarki ga masu sarrafa saurin lantarki (ESCs), masu sarrafa jirgin, kyamarori, da sauran kayan aiki. Yin amfani da PDB yana inganta tsari da amincin tsarin wutar lantarki na jirgin ku. Wannan yana da mahimmanci don aminci da ingantaccen aiki na jirgin.

Ga wasu ra'ayoyin ayyuka waɗanda ke amfana daga amfani da PDB:

• Gina quadcopter ko hexacopter na musamman.
• Haɗa kyamara mai ƙarfi don ɗaukar hoto daga sama.
• Ƙara mai watsa bidiyo na FPV (First-Person View) don sarrafa jirgin a lokaci guda.
• Sanya fitilun LED don inganta ganuwa yayin jiragen dare.

Kayan aiki / Abubuwan haɗi

Aikin yana amfani da nau'ikan allunan rarraba wutar lantarki guda biyu: PDB mara aiki (ba shi da daidaita wutar lantarki) da PDB mai aiki (tare da fitarwa na 5V da 12V da aka daidaita). (a cikin bidiyo a 00:08)

Za ku kuma buƙaci:

• Masu sarrafa saurin lantarki (ESCs)
• Baturi (3-4 cell LiPo da aka ba da shawarar)
• Multimeter (don auna wutar lantarki)
• Wayoyi da masu haɗawa
• LEDs (na zaɓi)

Jagorar Haɗin Wayoyi

PDB mara aiki (a cikin bidiyo a 01:31) yana da alamun madaidaitan wutar lantarki masu kyau da marasa kyau. Duk madaidaitan wutar lantarki masu kyau suna haɗe a ciki, kamar yadda duk madaidaitan marasa kyau suke. Kowane ESC yana haɗawa da nau'i-nau'i na kyau da marasa kyau. Akwai ƙarin haɗin don LEDs da sauran kayan aiki. (a cikin bidiyo a 01:39)

PDB mai aiki (a cikin bidiyo a 04:39) shima yana da madaidaitan wutar lantarki masu kyau da marasa kyau don haɗin baturi kuma yana ba da fitarwa na 5V da 12V da aka daidaita. Wannan allon kuma ya haɗa da maɓallai don sarrafa wutar lantarki zuwa fitarwa na 12V da 5V, da kuma LEDs na zaɓi. (a cikin bidiyo a 03:37)

%%WIRING%%

Bayanin Lambar

Babu lambar da ake buƙata don wannan aikin.

Aiki Kai Tsaye / Nunawa

Bidiyon yana nuna haɗin da gwajin duka PDBs. Mai gabatarwa yana haɗa multimeter don auna wutar lantarki a wurare daban-daban akan allunan, yana nuna rarraba wutar lantarki da aikin masu daidaita wutar lantarki a cikin PDB mai aiki. (a cikin bidiyo a 02:56)

Bidiyon yana nuna amfani da maɓallai don sarrafa wutar lantarki zuwa fitarwa na 12V da 5V da LEDs. (a cikin bidiyo a 03:37, 05:52) Mai gabatarwa kuma yana nuna yadda ake daidaita ƙarfin wutar lantarki daban-daban na baturi (misali, 15.5V daga baturi mai cell 4) don samar da fitarwa na 5V da 12V masu tsayayye. (a cikin bidiyo a 07:07)

Babuka

• [00:03] Gabatarwa ga Allunan Rarraba Wutar Lantarki
• [00:35] PDB Mara Aiki vs. PDB Mai Aiki
• [01:30] Haɗin Wayoyi da Haɗin PDB Mara Aiki
• [02:56] Gwaji da Nunawa na PDB Mara Aiki
• [04:39] Bayanin PDB Mai Aiki da Fasaloli
• [05:33] Haɗin Wayoyi da Haɗin PDB Mai Aiki
• [06:00] Gwaji da Nunawa na PDB Mai Aiki
• [07:07] Daidaita Wutar Lantarki na PDB Mai Aiki