```html የአርዱኖ ኮድ እና ቪዲዮ ለሻርፕ IR ርቀት ሞጁል ከLCD1602 ማሳያ ጋር ```

/*
 * Sharp IR (infrared) distance measurement module for Arduino
 * Measures the distance in cm and displays it on LCD1602 (without the I2C module)

 * Original library: https://github.com/guillaume-rico/SharpIR
 
 * Watch video instructions for this code: https://youtu.be/NjUOEAoKY7A
 * 
 * Full explanation of this code and wiring diagram is available at
 * my Arduino Course at Udemy.com here: http://robojax.com/L/?id=62

 * Written by Ahmad Shamshiri on Feb 03, 2018 at 07:34
 * in Ajax, Ontario, Canada. www.robojax.com
 * 

 * Get this code and other Arduino codes from Robojax.com
Learn Arduino step by step in a structured course with all material, wiring diagrams, and libraries
all in one place. 

If you found this tutorial helpful, please support me so I can continue creating 
content like this. 

or make a donation using PayPal http://robojax.com/L/?id=64

 *  * This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.* 
 * This code has been downloaded from Robojax.com
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.

*/



// original source https://www.arduino.cc/en/Tutorial/HelloWorld
// include the library code:
#include <LiquidCrystal.h>

// initialize the library by associating any needed LCD interface pin
// with the arduino pin number it is connected to
const int rs = 12, en = 11, d4 = 5, d5 = 4, d6 = 3, d7 = 2;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

///////////////////***** start of Sharp IR
//Sharp IR library source: https://github.com/guillaume-rico/SharpIR
#include <SharpIR.h>

#define IR A0 // define Sharp IR signal pin
#define model 430 // the model of the IR module
// Sharp IR code for Robojax.com
// ir: the pin where your sensor is attached
// model: an int that determines your sensor:
/*
 * GP2Y0A02YK0F --> "20150"
 GP2Y0A21YK --> "1080"
 GP2Y0A710K0F --> "100500"
  GP2YA41SK0F --> "430"
 */
 
 

SharpIR SharpIR(IR, model);
/////////////////////**** end of Sharp IR

void setup() {
  // Robojax LCD1602 Test 
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  // Robojax Sharp IR with LCD1602 Test 
}

void loop() {
   lcd.clear();
  // Robojax.com Sharp IR Test 
    lcd.setCursor(0, 0);
    lcd.print("Robojax IR Test");
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 1);
 int dis=SharpIR.distance();// gets the distance in cm
 String distance = String(dis);
 distance ="Distance: "+distance+"cm";
 lcd.print(distance); 



  delay(500);
  // Robojax.com Sharp IR Test  
}