/*
 * Lesson 60-2: While and do-while loop | Arduino Step by Step course by robojax
 This code is a "do-while" loop example.
 Watch full details: https://youtu.be/rbUiiJ1aSFg
 * 
 * Written by Ahmad Shamshiri on December 28, 2021 at 06:46 in Ajax, Ontario, Canada
 * This code can be obtained from Robojax.com

This code is available at http://robojax.com/course1/?vid=lecture67
 
With over 100 lectures free on YouTube. Watch it here: http://robojax.com/L/?id=338
Get the code for the course: http://robojax.com/L/?id=339  


or make a donation using PayPal: http://robojax.com/L/?id=64
 
 * This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.
 * This code has been downloaded from Robojax.com
 
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 */
int b = 0;//


//The code inside setup() runs once.

void setup() {
   Serial.begin(9600);
   Serial.println("Lesson: 60-2: While and Do while");
  while(b < 4)
  {
   Serial.println(b);
   b++;
  }
}//setup end

void loop() {
  //robojax.com code. Nothing inside loop here
}