This tutorial is part of: WiFi LoRa 32 Tutorials
All videos related to Heltec WiFi LoRa 32 are related using this group
本课是……的一部分:
WiFi LoRa简介
How to Use the Heltec LoRa CubeCell Development Board HTCC-AB01
In this video, we learn how to use the Heltec CubeCell LoRa development module. The CubeCell is explained, GPIO pins are explained, getting the driver for the Arduino IDE is shown, and reinstalling it is shown. Where to purchase it and the documentation are explained. RGB LED control is demonstrated. Each GPIO pin is shown by connecting an LED to it. Two CubeCells are used to send text from one and receive it on the other. Also, using one CubeCell as a remote push-button transmitter (TX) and the other CubeCell as a receiver (RX) to turn an LED on/off remotely.
The Board Manager URL: https://resource.heltec.cn/download/package_CubeCell_index.json
This tutorial is part of: WiFi LoRa 32 Tutorials
- Using Heltec WiFi LoRa 32 V3 to transmit temperature using DHT22 to 1.4km
- 13 Miles 20km with NO WiFi? How LoRa Sent Voltage Across Crazy Distances! (Heltec WiFi LoRa 32 V3)
- Turn On a Device from 13 mile 21km Away – The Ultimate Off-Grid LoRa Project with WiFi LoRa 32!
- Remote Door Alert System from 13 mile 21 km Away With LoRa – Off the Grid! (Heltec WiFi LoRa 32 V3)
- Control a Servo motor from Miles Away! Heltec WiFi LoRa 32 V3 Arduino Tutorial (TX)
- DIY Remote Relay Project: 13 Mile No-Wi-Fi/No-SIM Heltec LoRa 32 Module
没有附加代码。
Common Course Links
Common Course Files
资源与参考
-
外部ASC6501 MCU PSoC Datasheet (PDF)vis-plus.ee
-
外部CubeCell HTCC-AB01 product page (Heltec.org)heltec.org
-
外部CubeCell HTCC-AB01 Quick Start Guide (Documentation)docs.heltec.cn
-
外部CubeCell HTCC-AB01 schematic (PDF)resource.heltec.cn
-
外部CubeCell Repository (GitHub)github.com
文件📁
没有可用的文件。
