This tutorial is part of: Hướng dẫn WiFi LoRa 32
Tất cả các video liên quan đến Heltec WiFi LoRa 32 đều được chia sẻ trong nhóm này. Liên kết đến các video khác nằm bên dưới bài viết này.
How to Use the Heltec LoRa CubeCell Development Board HTCC-AB01
In this video, we learn how to use the Heltec CubeCell LoRa development module. The CubeCell is explained, GPIO pins are explained, getting the driver for the Arduino IDE is shown, and reinstalling it is shown. Where to purchase it and the documentation are explained. RGB LED control is demonstrated. Each GPIO pin is shown by connecting an LED to it. Two CubeCells are used to send text from one and receive it on the other. Also, using one CubeCell as a remote push-button transmitter (TX) and the other CubeCell as a receiver (RX) to turn an LED on/off remotely.
The Board Manager URL: https://resource.heltec.cn/download/package_CubeCell_index.json
This tutorial is part of: Hướng dẫn WiFi LoRa 32
- Sử dụng Heltec WiFi LoRa 32 V3 để truyền nhiệt độ bằng DHT22 đến khoảng cách 1,4km
- 13 Miles 20km with NO WiFi? How LoRa Sent Voltage Across Crazy Distances! (Heltec WiFi LoRa 32 V3)
- Turn On a Device from 13 mile 21km Away – The Ultimate Off-Grid LoRa Project with WiFi LoRa 32!
- Remote Door Alert System from 13 mile 21 km Away With LoRa – Off the Grid! (Heltec WiFi LoRa 32 V3)
- Control a Servo motor from Miles Away! Heltec WiFi LoRa 32 V3 Arduino Tutorial (TX)
- DIY Remote Relay Project: 13 Mile No-Wi-Fi/No-SIM Heltec LoRa 32 Module
Common Course Links
Common Course Files
Tài nguyên & tài liệu tham khảo
-
Bên ngoàiASC6501 MCU PSoC Datasheet (PDF)vis-plus.ee
-
Bên ngoàiCubeCell HTCC-AB01 product page (Heltec.org)heltec.org
-
Bên ngoàiCubeCell HTCC-AB01 Quick Start Guide (Documentation)docs.heltec.cn
-
Bên ngoàiCubeCell HTCC-AB01 schematic (PDF)resource.heltec.cn
-
Bên ngoàiCubeCell Repository (GitHub)github.com
Tập tin📁
Không có tệp nào khả dụng.
