Tutorial ini adalah bagian dari: Tutorial WiFi LoRa 32
Semua video yang berkaitan dengan Heltec WiFi LoRa 32 tergabung dalam grup ini. Tautan ke video lain berada di bawah artikel ini.
How to Use the Heltec LoRa CubeCell Development Board HTCC-AB01
In this video, we learn how to use the Heltec CubeCell LoRa development module. The CubeCell is explained, GPIO pins are explained, getting the driver for the Arduino IDE is shown, and reinstalling it is shown. Where to purchase it and the documentation are explained. RGB LED control is demonstrated. Each GPIO pin is shown by connecting an LED to it. Two CubeCells are used to send text from one and receive it on the other. Also, using one CubeCell as a remote push-button transmitter (TX) and the other CubeCell as a receiver (RX) to turn an LED on/off remotely.
The Board Manager URL: https://resource.heltec.cn/download/package_CubeCell_index.json
Tutorial ini adalah bagian dari: Tutorial WiFi LoRa 32
- Menggunakan Heltec WiFi LoRa 32 V3 untuk mengirimkan suhu menggunakan DHT22 hingga 1,4 km
- 13 Miles 20km with NO WiFi? How LoRa Sent Voltage Across Crazy Distances! (Heltec WiFi LoRa 32 V3)
- Turn On a Device from 13 mile 21km Away – The Ultimate Off-Grid LoRa Project with WiFi LoRa 32!
- Remote Door Alert System from 13 mile 21 km Away With LoRa – Off the Grid! (Heltec WiFi LoRa 32 V3)
- Control a Servo motor from Miles Away! Heltec WiFi LoRa 32 V3 Arduino Tutorial (TX)
- DIY Remote Relay Project: 13 Mile No-Wi-Fi/No-SIM Heltec LoRa 32 Module
Common Course Links
Common Course Files
Sumber daya & referensi
-
EksternalASC6501 MCU PSoC Datasheet (PDF)vis-plus.ee
-
EksternalCubeCell HTCC-AB01 product page (Heltec.org)heltec.org
-
EksternalCubeCell HTCC-AB01 Quick Start Guide (Documentation)docs.heltec.cn
-
EksternalCubeCell HTCC-AB01 schematic (PDF)resource.heltec.cn
-
EksternalCubeCell Repository (GitHub)github.com
Berkas📁
Tidak ada file tersedia.
