Overcurrent Protection with Winson WCS Current Sensors and an Arduino LCD
This tutorial by Robojax explains how to use a Winson WCS Current sensor to measure DC current and use a relay as overcurrent protection so the current is disconnected when the current reaches the threshold value set in the code. The Robojax WCS Library is used to measure current. This code will work with all Winson WCS Current sensors.
This video requires the Robojax WCS Library to be installed. The link is below.
This code is offered as 3 sketches:
- Overcurrent Protection with LCD
- Overcurrent Protection with LCD and powering up the LCD from a digital pin
- Overcurrent Protection without LCD
This code is included with the library. You don't have to download it from this page. Just download the library; this code is included.
Изображения
Вещи, которые могут вам понадобиться
-
Амазонка
-
eBay
-
eBay
-
АлиЭкспрессPurchase WCS1800 Hall Current Sensor from AliExpresss.click.aliexpress.com
Ресурсы и ссылки
-
ВнешнийDatasheet for WCS1500winson.com.tw
-
ВнешнийDatasheet for WCS1600winson.com.tw
-
ВнешнийDatasheet for WCS1700winson.com.tw
-
ВнешнийDatasheet for WCS1800winson.com.tw
-
ВнешнийDatasheet for WCS2702winson.com.tw
-
ВнешнийDatasheet for WCS2705winson.com.tw
-
ВнешнийDatasheet for WCS2720winson.com.tw
-
ВнешнийDatasheet for WCS2800winson.com.tw
-
ВнешнийDatasheet for WCS2801winson.com.tw
-
ВнешнийDatasheet for WCS2810winson.com.tw
-
ВнешнийDatasheet for WCS3740winson.com.tw
-
ВнешнийDatasheet for WCS37A50winson.com.tw
-
ВнешнийDatasheet for WCS38A25winson.com.tw
-
ВнешнийDatasheet for WCS6800winson.com.tw
Файлы📁
Другие файлы
-
Download RoboJax WCS Library
robojax_Winson_WCS_library.zip0.04 MB