Overcurrent Protection with Winson WCS Current Sensors and an Arduino LCD
This tutorial by Robojax explains how to use a Winson WCS Current sensor to measure DC current and use a relay as overcurrent protection so the current is disconnected when the current reaches the threshold value set in the code. The Robojax WCS Library is used to measure current. This code will work with all Winson WCS Current sensors.
This video requires the Robojax WCS Library to be installed. The link is below.
This code is offered as 3 sketches:
- Overcurrent Protection with LCD
- Overcurrent Protection with LCD and powering up the LCD from a digital pin
- Overcurrent Protection without LCD
This code is included with the library. You don't have to download it from this page. Just download the library; this code is included.
تصاویر
LCD displaying the current
Full setup with LCd
Winson Current Sensor
WCS3740
WCS3740
WCS3740
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS2801 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS3740 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
WCS1800 with relay
348-Arduino code for Winsen WCS Current Sensor with LCD
زبان: C++
کپی شد!
مواردی که ممکن است به آنها نیاز داشته باشید
-
آمازون
-
ایبیخرید ماتریس RGB ESP32-S3 از eBayebay.us
-
علیاکسپرسحساس(حس کننده) جریان هال WCS1800 را از علیاکسپرس خریداری کنیدs.click.aliexpress.com
منابع و مراجع
-
خارجیWCS1500winson.com.tw
-
خارجیWCS1600winson.com.tw
-
خارجیWCS1700winson.com.tw
-
خارجیWCS1800winson.com.tw
-
خارجیWCS2702winson.com.tw
-
خارجیWCS2705winson.com.tw
-
خارجیWCS2720winson.com.tw
-
خارجیWCS2800winson.com.tw
-
خارجیWCS2801winson.com.tw
-
خارجیWCS2810winson.com.tw
-
خارجیWCS3740winson.com.tw
-
خارجیWCS37A50winson.com.tw
-
خارجیWCS38A25winson.com.tw
-
خارجیWCS6800winson.com.tw
فایلها📁
سایر فایلها
-
کتابخانه WCS RoboJax را دانلود کنید
robojax_Winson_WCS_library.zip0.04 MB
