STPB-5: Controlling a 28BYJ-48 Stepper Motor with Push Buttons to Any Angle
This is the Arduino code to control the 28BYJ-48 stepper motor with push buttons to send it to any angle you set in the code. For each push button, you can set the angle, speed, and direction.331-Arduino code to control a 28BYJ-48 with a ULN2003 board using as many push buttons as you like | STPB-5
Язык: C++
Скопировано!
Ресурсы и ссылки
Файлы📁
Нет доступных файлов.
