Lesson 66-2: Control 4 AC Bulbs or Loads Using a 4-Channel Relay with 4 Push Buttons—Push-Keep
更新于 2026-08-27 • 通过 未知作者
Lesson 66-1: Control 4 AC Bulbs or Loads Using a 4-Channel Relay with 4 Push Buttons—Toggle Light, Push-On, Push-Off
更新于 2026-08-27 • 通过 未知作者
Lesson 107-8: Controlling the Speed of a 28BYJ-48 Stepper Motor Using a Potentiometer
更新于 2026-08-27 • 通过 未知作者
Lesson 107-7: Sending a 28BYJ-48 Stepper Motor to Any Angle with Defined STPB-5 Push Buttons
更新于 2026-08-27 • 通过 未知作者
Lesson 107-6: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons, with Angle and Speed STPB-4
更新于 2026-08-27 • 通过 未知作者
Lesson 107-4: Controlling a 28BYJ-48 Stepper Motor Using Two Push Buttons, CW, CCW (Keep Pressed), STPB-2
更新于 2026-08-27 • 通过 未知作者
Lesson 107-3: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons: CW, CCW, and Stop (STPB-1)
更新于 2026-08-27 • 通过 未知作者
Control 10 output pins using 10 push-button switches with 1 Arduino input pin ANPB-V2
更新于 2026-08-27 • 通过 未知作者
How to Use Up to 10 Push-Button Switches with 1 Arduino Input Pin ANPB-V1
更新于 2026-08-27 • 通过 未知作者
How to Control a 360° Servo with Three Push-Button Switches
更新于 2026-08-27 • 通过 未知作者
Controlling the Speed of a 28BYJ-48 Stepper Motor with a Potentiometer T174
更新于 2026-08-27 • 通过 未知作者
Lesson 54-2: Controlling Two DC Motors Using a Potentiometer and Push Buttons
更新于 2026-08-26 • 通过 未知作者
Lesson 54-1: Controlling a Single DC Motor Using a Potentiometer and Push Buttons
更新于 2026-08-26 • 通过 未知作者
Lesson 55-2: Controlling Two DC Motors Using Push Buttons
更新于 2026-08-26 • 通过 未知作者
Lesson 55-1: Controlling a Single DC Motor Using Push Buttons
更新于 2026-08-26 • 通过 未知作者
Lesson 61-2: Using Switch and Case: Arduino Programming Example 2
更新于 2026-08-26 • 通过 未知作者
Lesson 61-1: Using Switch and Case: Arduino Programming Example 1
更新于 2026-08-26 • 通过 未知作者
Lesson 62-2: Allowing a Push-Button Switch to Be Pushed After a Specific Time
更新于 2026-08-26 • 通过 未知作者
Lesson 65: Controlling Two-Channel Solid-State Relays with Push Buttons Using an Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 87: Controlling a Servo Motor Using a Push-Button Switch
更新于 2026-08-26 • 通过 未知作者
Lesson 91: Controlling a Servo Motor Using a Potentiometer and Displaying the Angle on an LCD
更新于 2026-08-26 • 通过 未知作者
Lesson 97-1: Detecting Rotary Encoder Rotation and Pushing the Switch
更新于 2026-08-26 • 通过 未知作者
Lesson 98-8: Walking Light with Push Button and LEDs with Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 98-5: Fade Light When a Button Is Pressed Using Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 98-3: How to Turn On/Off a Toggle LED Using a Push Button with Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 98-2: How to Turn On and Off an LED Using a Push Button with Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 106-2: Reading Voltage from a Potentiometer and Recording to Micro SD in CSV Format
更新于 2026-08-26 • 通过 未知作者
Lesson 106-1: Reading Voltage from a Potentiometer and Recording it on Micro SD
更新于 2026-08-26 • 通过 未知作者
Lesson 109-5: Setting Output Voltage with a Push Button Using an MCP4725 DAC with Arduino
更新于 2026-08-26 • 通过 未知作者
Lesson 110-5: 74HC595 Adjust Delay Sequence Time for a 7-Segment LED Display Using a Potentiometer
更新于 2026-08-26 • 通过 未知作者