23-

DJi Flight Controllers

• DJI Naza M Lite GPS Combo Flight Controller

24-

ArduPilot fligh controllers

• APM 2.8 Flight Controller GPS Telemetry Kit
• APM 2.6 ArduPilot Mega APM 2.6 Flight Control (side connector)
• APM 2.6 ArduPilot Mega APM 2.6 flight control
• APM 2.8 ArduPilot flight controller
• APM 2.6 ArduPilot flight controller kit with GPS and power module
• APM 2.8 ArduPilot Mega APM 2.8 flight control (side connector)

25-

Pixhawk

• Pixhawk PX4 2.4.6 flight controller with M8N GPS + complete kit

26-

KK2

• KK2.1.5 Multi-rotor LCD Flight Control Board with Case

27-

NAZE32

• Naze32 Pro 10-DOF Flight Controller
• Naze32/Flip32 6DOF Flight Controller
• Naze32 Pro 10-DOF Flight Controller
• SP Racing F3 Flight Controller Acro Naze32 6DOF
• Pro Micro ATmega32U4 (ATMEGA32U4-AU) 5V/16MHz module with bootloader

29-

OSD

• OSD for APM ArduPilot Mega MinimOSD Rev. 1.1
• 3DR OSD telemetry cable V2, 200mm

30-

Monitors

• 7-inch FPV LCD color monitor with sun hood

31-

Transmitter

• Boscam FPV 2000mW 8CH 5.8GHz Transmitter TS582000
• Boscam TS832 32CH 5.8G 600mW Wireless AV FPV transmitter
• SkyZone TS5823 5.8GHz 32CH A/V 200mW mini FPV transmitter
• Light L250 5.8 GHz 250 mW VTX FPV transmitter attached to GoPro
• 5.8 GHz 32CH 600 mW Super Mini A/V FPV Transmitter
• FatShark 5.8GHz Cased FPV Transmitter
• Walkera Runner 250 Z-20 TX5816 transmitter
• Quantum Q58-2 40-channel 200mW FPV Transmitter with Antenna

32-

Receivers

• 5.8 GHz RC305 FPV 8-channel receiver for RC quadcopter drones
• FatShark Dominator 5G8 24ch NexwaveRF receiver module

33-

FPV Accessories

• High-quality glass fiber FPV monitor mount/display holder
• GoPro Hero3, Hero4 FPV Cable, USB to AV Video Cable
• High-quality 7-inch FPV LCD monitor display sun hood
• FPV GoPro power and video cable for TS832 transmitter
• Fatshark Filtered FPV Transmitter Power Supply (2S/3S/4S)
• SMA Male to SMA Female 180mm aerial extension cable
• Pan/Tilt Camera Mount with 2 Servos for FPV
• 2.5mm jack to RCA FPV cable, 20cm
• SMA male to RP-SMA male plug 150mm aerial extension cable

34-

GPS Receivers

• Mini Ublox 7 NZ GPS for Naze32/Flip32 6DoF/10DoF
• Mini Ublox 7 OpenPilot OP GPS CC3D

35-

GPS Stands

• GPS folding mount

36-

Power Distribution

• APM PX4 quadcopter T-plug power distribution board
• Multicopter power distribution board
• Quadcopter Power Distribution RTF (XT60 plug)
• Power Distribution Board Mini for QAV250 CC3D with Standoff
• Power Distribution Board Mini for QAV250 CC3D
• Power distribution board (PDB) for Naze32 and CC3D
• Matek PDB-XT60 power distribution board with BEC, 5V, 12V
• HUB5V12V Matek Mini Power Hub Power Distribution Board PDB with BEC, 5V & 12V FPV
• Power Distribution Board (PDB) with BEC 5V & 12V FPV

37-

Power Modules

• Power Module v1.0 for APM Pixhawk XT61 plug
• Power Module for APM Pixhawk, Deans T Plug
• Walkera Runner 250 Power Board, Runner 250-Z-23
• 12V from a 4S battery for FPV, TX, and camera with 3 JST outputs
• DC-to-DC 12-24V to 5V 3A Mini Step-Down Module
• MP1584 - 1A DC/DC, Step-Down, Non-Isolated, Regulated Voltage Converter
• MP3608 2A DC-to-DC boost converter
• 2pcs MP3608 2A DC-to-DC boost converter
• XL6009 Buck-Boost DC-DC Adjustable Step-Up/Step-Down Converter
• DC-DC 2V-5V to 5V boost step-up power voltage converter, 2A fixed output module
• DC 3.3V, 3.7V, 5V, 6V to 12V Step-Up Power Supply Boost, Vertical, for Arduino
• MP2307 Mini DC-DC 2A Step-Down Converter, Adjustable 4.75V-23V
• LM317 Adjustable Voltage DC-DC 1A Regulator Module, Input 4.2V-40V, Output 1.2V-37V

39-

Quadcopter Frame

• Quadcopter 450 frame with landing gear
• X525 quadcopter folding 600mm frame
• Mini Quad Fiber Glass ZMR250 FPV Racer Frame
• 250mm Quadcopter FPV/Racing fiberglass frame with long landing gear
• 310mm Quadcopter FPV/Racing fiberglass frame with long landing gear
• Spidex 220 FPV Quad Frame by Quaternium (Kit)
• HMF U580 Carbon Fiber Folding Quadcopter Kit
• Tarot TL280C Space Through Machine FPV full carbon fiber (orange) frame

40-

Hexacopter Frame

• Tarot 680 PRO Hexacopter Folding Frame 3K Carbon
• F550 Hexacopter with carbon fiber landing gear

44-

Battry Chargers

• iMax B6AC 80W Balance Charger/Discharger (generic)
• iMAX B6 RC Balance Digital Charger/Discharger
• Turnigy Neutron 80W touch-screen LiPo battery charger with AC adapter
• SKYRC IMAX B6AC V2 Professional Balance Charger/Discharger
• iMax B3 LiPo 2S 3S Battery Charger
• SkyRC e3 AC 2-3S battery charger (genuine)
• TEAC 25W/3A Professional Balance Charger for 2S 3S LiPo/2S 3S LiFe/1-8S NiMH Batteries
• TP5100 2A 8.4V/4.2V 1S or 2S lithium 18650 charger DIY module
• Micro USB 5V 1A 18650 TP4056 lithium battery charger module board with battery protection
• USB-C 5V 1A 18650 TP4056 lithium battery charger module board with battery protection

45-

XT60 Connectors

• XT60 harness for two packs in parallel (16 AWG)
• 2 pairs (4 pieces) XT60 connectors, male/female
• XT60 harness for two packs in parallel
• XT60 female with 12AWG silicon wire, 10cm
• XT60 male connector with 30cm 16AWG silicon wire
• XT60 with 4mm banana charge cable, 30cm
• XT60 Panel Mounting Kit
• XT60 male with 12 AWG silicon wire, 10 cm
• XT60 male with 14 AWG silicon wire, 10 cm
• XT60 female with 14 AWG silicon wire, 10cm
• Male XT60 to female XT30 plug adapter converter
• Female XT60 to Male XT30 Plug Adapter Converter
• XT30 Connector to 4.0mm Banana Plug, 16 AWG, 30cm Charge Cable
• Male TRX to Female XT60 Connector Adapter
• XT60H Upgraded XT60 Sheath Housing Connector Plug, Lithium Battery Discharge Terminal for RC LiPo Battery

46-

T Dean Plug

• Four pairs Dean connector T-plugs
• T-connector harness for two packs in parallel
• Dean T male to XT60 connector

48-

30A ESC

• RoboJax 30A Brushless Electronic Speed Controller ESC
• 30A Brushless ESC SimonK firmware
• 4x 30A Brushless ESC SimonK firmware (bullet connector)
• Turnigy Plush 30A Speed Controller (ESC)
• Afro ESC 30 Amp Opto Multi-rotor Motor Speed Controller (SimonK Firmware)
• Afro ESC 30 Amp Multi-rotor Motor Speed Controller (SimonK Firmware)

49-

FPV Cameras

• 700TVL FPV metal case 3.6mm camera
• 600TVL 1/4" 1.8mm CMOS FPV 170-degree wide-angle lens camera
• Tarot 600TVL FPV mini digital camera for mini drones
• Fatshark 700TVL V2 WDR CMOS camera
• Mobius ActionCam 1080p HD video camera set with live video out
• 700TVL 2.8mm lens Sony CCD FPV camera
• RunCam HD Full HD 1080p 120-degree FPV camera recorder
• Boscam TR1 FPV camera recorder with 5.8 GHz transmitter
• Walkera Runner 250 HD Mini Camera
• 1000TVL Micro-Compact 2.8mm FPV camera
• I saw Edge Action 4K Action Camera
• Echelon CCD 1000TVL 110-degree FPV camera

51-

Motor, ESC and Propopeller Kit

• 4 x 1000 kV motors, 30A ESC, and prop kit

52-

3.5mm Bullet Connectors

• 10 Pairs 3.5mm Bullet Banana Connectors

53-

FPV Trasmitter and Receiver

• Boscam FPV 5.8GHz 2000mW 8CH Transmitter and Receiver
• Boscam FPV 5.8GHz 600mW 32-channel video transmitter and receiver
• FPV Boscam transmitter and receiver, 200mW, 1km
• FPV Combo 5.8 GHz 200 mW 1 km Transmitter with Receiver
• Boscam FPV 5.8GHz RC832 receiver

54-

Straps

• Glass fiber GoPro camera Velcro fastener strap, blue
• 2x Nylon Strap for Battery or Camera, Green
• 2x Nylon Strap for Battery or Camera, Blue
• 2x Nylon Strap for Battery or Camera, Red
• 2x Nylon Strap for Battery or Camera, Black

55-

Monitors with Receiver

• Boscam 5.8 GHz FPV Diversity LCD Receiver RX-LCD5802
• 7-inch LCD FPV monitor, built-in LiPo battery, 5.8 GHz
• Little Pilot 5-inch 5.8 GHz FPV Monitor with mushroom antenna and built-in battery

56-

GPS Receivers with Stand

• NEO-6M GPS with Compass for APM 2.6/APM 2.8, white
• Ublox NEO-M8N GPS module with compass + GPS bracket for APM 2.8

57-

FPV Kits with Monitor

• FPV Combo 5.8GHz 200mW 1km TX, RX, LCD, camera kit
• Boscam FPV 600mW transmitter and receiver with 7-inch display and camera
• Complete FPV kit with 200mW transmitter, monitor, camera, and receiver

58-

Motor Accessories

• 3.0mm/3.17mm RC Aluminum Bullet Propeller Adapter for Brushless Motor
• Fixed adapter nut cap for DJI Phantom motor 2212 920KV
• Propeller Adapter Nut Cap Set for DJI Phantom Motor 2212 920KV (CW and CCW)
• One pair propeller nut cap adapter CW CCW for Emax 1806
• 1 Pair Propeller Nut Cap Adapter CW CCW for Emax 2204

59-

HXT Connector and cables

• HXT 3.5mm charging lead with 4mm banana plugs

60-

JST cables

• JST male to JR female 10 cm cable
• 2 pairs 2-pin mini JST 1.25mm with 10cm wire (male/female)

61-

Ready to Fly (RTF)

• Walkera Runner 250 Racing Quadcopter with Devo 7/Battery/Charger/FPV (RTF)
• Walkera QR X350 Pro quadcopter drone with GPS and Devo 10 (RTF)
• HobbyKing Black Widow 260 FPV Racer Ready-to-fly Quadcopter

16-

Multi-Rotor Drone

• Mini 250 Racer quadcopter frame, motors, GPS, FPV camera, ESC, CC3D, propellers, battery
• Walkera Runner 250 FPV quadcopter (BNF)
• Walkera Runner 250 Racing Quadcopter with Devo 7/Battery/Charger/FPV (RTF)
• Walkera QR X350 Pro quadcopter drone with GPS and Devo 10 (RTF)
• HobbyKing Black Widow 260 FPV Racer Ready-to-fly Quadcopter
• 450mm quadcopter kit, CC3D, motor, ESC, props, and power

18-

Compatible with Arduino®

• 2-pc Arduino 2.4 GHz Transceiver Module NRF24L01
• DHT11 temperature and relative humidity sensor module, Arduino
• Hall sensor, Hall switch, speed counting module, position sensing module
• Ultrasonic HC-SR04 transducer sensor for Arduino
• Nano Module V3.0 development board compatible with Arduino®
• Arduino® UNO R3 development board compatible with Arduino
• ATMEGA328P Pro Mini 328 Mini 5V/16MHz Arduino® Compatible board
• HM-11 Bluetooth 4.0 BLE CC2540
• Micro SD storage board Arduino
• Mifare RC522 card reader antenna RFID reader IC card proximity module
• HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 2-Axis YX Joystick RJXA-19 for Arduino
• USB cable for Arduino Uno
• MPU-6050 6DOF 3-axis gyroscope and accelerometer module for Arduino
• Arduino® UNO R3 compatible development board (with usb cable)
• 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• Arduino Compatible Atmega2560 R3 Development board
• BMP180 Digital Barometric Pressure Sensor Module for Arduino
• Ethernet Shield W5100 Network Expansion Board for Arduino
• High-sensitivity sound detection module for Arduino, AVR, PIC
• 5V stepper motor with ULN2003 driver board 28BYJ-48 for Arduino
• HC-SR501 Infrared PIR Motion Sensor Module, Arduino, Raspberry Pi
• MB102 Breadboard Power Supply Module, Arduino
• Light Intensity Sensor Module for Arduino
• SW-420 Vibration Sensor Module for Arduino
• LCD1602 LCD monitor, 16x2 character, 5V blue screen
• Prototype Shield, ProtoShield, with mini breadboard for Arduino
• ESP-01 ESP8266 Wi-Fi module for Arduino
• IR Infrared Obstacle Avoidance Sensor Module for Arduino
• Arduino Uno R3 Compatible board with USB cable
• Soil Humidity Detector Module for Arduino
• GY-NEO6MV2 NEO-6M GPS module for Arduino
• 2 pcs RFID keychain NFC tag 13.56 MHz (Arduino)
• IIC/I2C Serial Interface Module for 1602 LCD Display
• UNO Starter Kit, compatible with Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• BME280 atmospheric pressure sensor module
• KY-008 650nm 5mW laser transmitter
• APDS-9960 RGB Gesture Sensor I2C module for Arduino (6-pin)
• Digispark ATTINY85 Arduino development board with micro USB
• Digispark ATTINY85 Arduino USB development
• 5V low-trigger relay module for Arduino
• 433 MHz Transmitter and Receiver module for Arduino
• L298P DC Motor Driver Shield from Robojax on Amazon
• Standard Linear Hall Effect Magnetic Sensor Module for Arduino
• Tiny microSD card module
• 2 Micro 130 DC motor, 3.3V for Arduino
• 4-Digit LED 7-segment Display MAX7219 Module
• MQ-2 gas sensor module for Arduino
• MAX7219 dot-matrix module Arduino 8x8 display
• TTP223 Capacitive Touch Switch Button Module for Arduino
• 1602 LCD board keypad shield, yellow backlight for Arduino
• 8-Channel Bidirectional Logic Level Converter Module, 3.3V, 5V
• VNH2SP30 Stepper Motor Driver shield for Arduino
• Dual VNH2SP30 stepper motor driver shield for Arduino
• HC-SR505 PIR Motion Infrared Sensor Module
• Reed sensor module, magnetron module for Arduino
• DTMF MT8870 Module: Telephone Decoding for Raspberry Pi and Arduino
• 10 Project UNO Starter Base Kit, compatible with Arduino
• LilyPad Arduino 328 ATmega328P compatible board
• 12V DC motor, 13500 RPM, 19mm tiny dual-sided shaft
• 30A Range Current Sensor Module ACS712 Module for Arduino
• Motor stepper driver board ULN2003
• 2pcs I2C PCA9685 16-Channel DC Motor/Servo/LED Driver PWM for Arduino from Amazon
• Amazon Yo-yo
• DC 5V 1-Channel Low-Level Trigger Solid-State Relay SSR
• DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor M6 for Arduino
• DC 5V MAX6675 module + K-type thermocouple temperature sensor M6 for Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• 5V 2-Channel Relay Module Shield for Arduino, ARM, PIC, AVR, DSP
• W1209 Temperature Controller with display relay
• Infrared IR Wireless Remote Control + Infrared Receiver Module + Infrared Transmitter Kit for Arduino
• Infrared obstacle avoidance for a smart car
• L293D Motor Drive Expansion Shield for Arduino Duemilanove, Mega, UNO
• GP2Y0A21YK0F Sharp IR analog distance sensor, distance 10-80 cm cable for Arduino
• 4-piece RGB LED module for Arduino
• Laser Sensor Module, non-modulator tube, laser receiver
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino (6-pin)
• AMS1117 5V to 3.3V converter module
• MAX7219 8-digit 7-segment display for Arduino
• Audio Decoder Controller Module Board MT8870 DTMF for Arduino phones
• Rangefinder digital display for HC-SR04 8-bit MCU module
• Ultrasonic HC-SR04 module sensor distance measuring board with mount
• E18-D80NK Infrared Obstacle Avoidance Proximity Sensor
• Mini 4-Channel Motor Drive Shield Expansion Board L293D Module, High-Voltage Current Module for Arduino UNO, MEGA 2560
• Infrared Encoder Interrupter Module WYC H2010 Wide-gap
• Slot-type IR optocoupler speed sensor
• ACS712 Hall-Effect 30A Current Sensor for Arduino
• 16-pin 8x8 common anode 3mm LED display
• A4988 Stepper Motor Driver Module
• L9110S H-bridge stepper motor dual DC motor driver controller board for Arduino
• Omron G3MB-202P 2A solid-state relay for Arduino
• 2pcs IRFZ44N 55V 49A N-channel power MOSFET
• IRF840 N-channel 8A 500V TO-220 power MOSFET transistor
• MOSFET IRF520 9.2A Driver Switch Module
• Type A female USB to DIP 2.54 mm PCB board adapter for Arduino
• 5V low-trigger relay module for Arduino
• DC 5V 2-Channel Low-Level Trigger Solid-State Relay SSR
• Omron G5V-2-DC12 two-pole 12V DC relay
• VL53L0X Time-of-Flight Distance Sensor Breakout GY-VL53L0XV2V Module, Arduino
• BMP280 3.3V Digital Module, Replacement for BMP180 and BMP085 Temperature and Barometric Pressure Sensor Modules
• Manipulator mechanical arm paw gripper clamp kit for robot MG995 kit RJX-ARM55
• AM2320 Digital Temperature and Humidity Sensor. Original authentic. Can replace SHT20, SHT10.
• DHT11 temperature and relative humidity sensor module, Arduino (bare sensor)
• AM2301 Digital Temperature and Humidity Sensor Module
• USBASP, USBISP, AVR programmer, USB
• Rain and snow detector module for Arduino
• 0-10 second NE555 Timer Adjustable 12V Delay Module
• High-precision AM2302 DHT22 digital temperature and humidity sensor module for Arduino
• 8-pin adapter module NRF24L01 wireless transceiver
• MPU9250 SPI/I2C 9-Axis Attitude Module: Gyro, Accelerometer, and Magnetometer
• L298N dual H-bridge DC motor driver stepper motor dual channel for Arduino
• GY-273 HMC5883L 3V-5V triple-axis compass magnetometer sensor module for Arduino
• Voltage Sensor for Arduino
• PCF8574T I/O I2C port interface support for Arduino cascading extended module
• BH1750FVI Digital Light Intensity Sensor Module for Arduino
• K type surface thermocouple temperature sensor 1m prob from -50 to 204°C
• ASAIRE AM2320B digital temperature and humidity sensor
• D1 WiFi Development Board ESP-12F ESP8266 Arduino IDE UNO OTA Wemos IoT
• DC 5V Relay SRD-5VDC-SL-C 5-pin 10A 125VAC 30VDC 28VDC
• 650nm, 6mm, 5V, 5mW laser dot diode module head, red
• TEMT6000 Ambient Light Sensor for Arduino
• Infrared Remote Control Module with Receiving Head HX1838, NEC Coding
• 1.5A 2-way dual H-bridge DC and stepper L298N motor driver module for Arduino
• L298N DC Motor Driver Module, Stepper Motor Dual H-Bridge, Max 20W, 2A/Bridge, for Arduino
• NTC Thermistor Temperature Sensor, Waterproof Probe, Wire, 10K, 1%, 3950, W1209, W1401 cable
• U-disk audio player SD card voice module WTV020-SD-16P for Arduino
• Allegro ACS758 Current Sensor, 50A to 200A
• Flame Sensor Module for Arduino
• USBasp/USBisp AVR programmer USB with 10-pin converter to standard 6-pin adapter
• Dual Motor Driver TB6612FNG, 1A per channel
• LCD2004 LCD monitor, 20x4 character, 5V blue screen with I2C module
• BH1750FVI digital 16-bit ambient light sensor I2C for Arduino
• DS3231 IIC precision real-time clock module memory module for Arduino
• DS1307 AT24C32 Real-Time Clock (RTC) I2C Module for Arduino
• ADXL345 3-Axis Digital Accelerometer Tilt Module for Arduino
• Allegro CJMCU-758 ACS758LCB-100B-PFF-T Linear Current Sensor Module
• 5V Relay Module with HC-SR501 Infrared PIR Motion Sensor Module, Arduino, Raspberry Pi
• AT24C256 DIP-8 EEPROM data storage module, 256kb with serial I2C interface
• 5V Relay Module with TTP223 Touch Sensor Module, Arduino, Raspberry Pi
• CD74HC4067 16-Channel Analog/Digital Multiplexer Breakout Board
• GY-530 VL53L0X IIC I2C ToF time-of-flight ranging distance sensor, 4+2 pins (blue)
• Arduino UNO R3 compatible development board with 400point bread board and power module (without USB cable)
• PCF8574 remote 8-bit I/O expander for I2C bus
• MAX485 Low-power, slew-rate-limited RS-485/RS-422 transceiver
• MCP9808 I2C High Accuracy Digital Temperature Sensor -40°C to +125°C
• High-precision AM2302 DHT22 digital temperature and humidity sensor module for Arduino, black PCB
• TCRT5000 IR Intelligent Vehicle Tracking Sensor Module
• NTC Thermistor Temperature Sensor, Waterproof Probe with Wire, 10K, 1%, 3950, W1209, W1401, 1m cable
• ITR20005 Opto-interrupter 940nm non-contact speed counter/switcher
• Maxim Integrated DS18B20 programmable 1-Wire digital thermometer, 3-pin TO-92
• Omron G5V-1-DC12 two-pole 12V DC relay
• Omron G5V-2-DC5 two-pole 5V DC relay
• 16-pin 8x8 mini common anode 20mm x 20mm 1.9mm LED display
• DS1302 I2C precision real-time clock module for Arduino
• HTU21D temperature and humidity sensor module
• OLED 128x64 0.96-inch SSD1306 I2C display for Arduino
• OLED 128x32 0.91-inch SSD1306 I2C display for Arduino
• Micro PIR Motion Detection Sensor AM312 for Arduino, Raspberry Pi
• TTP223B Capacitive Touch Switch Button Module for Arduino
• D1 PRO Mini NodeMCU 4MB Lua Wi-Fi Internet of Things development board based on ESP8266 WeMos
• BME280 Digital Relative Barometric Pressure and Humidity Sensor Module for Arduino
• Waterproof 18B20 temperature probe, temperature sensor, stainless steel package
• SPI to Ethernet Hardware TCP/IP W5500 Ethernet network module
• 650nm 6mm 5V 5mW laser dot diode module head red (silver)
• D1 Mini Pro NodeMCU, a 6MB Lua-based WiFi Internet of Things development board based on the ESP8266 WeMos.
• MH-Tiny ATTINY88 development module Nano v3.0 micro USB
• ESP-01, ESP8266, ESP-01S adapter with pins
• 74HC595 driving a 2-digit seven-segment display for Arduino
• MCP4725 digital-to-analog converter DAC I2C module for Arduino and Raspberry Pi
• 433MHz LoRa SX1278 long-range RF wireless module DRF1278F for Arduino and Raspberry Pi
• MAX7219 8x8 matrix LED display for Arduino and Raspberry Pi (large chip)
• AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 3.3V low-trigger relay module for Arduino
• ACS712 Hall-Effect 20A Current Sensor for Arduino
• ACS712 Hall-Effect 5A Current Sensor for Arduino
• CJMCU-531 VL53L1X ToF time-of-flight 400cm ranging distance sensor - 6-pin
• BME280 atmospheric pressure sensor module, 3.3V
• Toshiba TB6612FNG dual motor driver carrier
• Joystick and four-key keypad module and shield for Arduino
• STM32F103C8T6 ARM STM32 minimum system development board module compatible with Arduino
• Sigma Micro SGL8022W single-channel touch chip for LED light regulation for Arduino
• MPR121 12-channel proximity capacitive touch sensor controller with I2C for Arduino and Raspberry Pi
• Allegro ACS770 ACS770LCB-50U-PFF-T current sensor, 50A to 200A
• DRV8833 Full-Bridge H-bridge motor driver module, 1.5A, 0 to 10.8V motor
• Allegro ACS770LCB-500B Linear Current Sensor for Arduino
• ADS1115 16-bit 860SPS 4-channel delta-sigma ADC with PGA and I2C for Arduino
• MCP4725 Breakout Board - 12-Bit DAC with I2C Interface for Arduino
• QMC5883L triple-axis magnetometer compass board module with I2C for Arduino
• DC 12V Relay SRD-12VDC-SL-C 5-pin 10A at 125V, 30V, 28V
• 3D Printer 42CH Stepper Motor Driver Shield Expansion Board DRV8825/A4988 R3
• DS18B20 100cm Waterproof Temperature Sensor with PCB adapter
• LCD1602-I2C LCD monitor, 16x2 character, 5V blue screen
• GY Attiny85 Digispark Kickstarter mini USB development board module Tiny85
• CH340 USB to RS485 converter adapter module for Windows, macOS, and Linux
• VL6180 proximity sensing module, 0-620 mm, 5V laser distance sensor
• 2pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 4pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 2pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 4pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 2pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 4pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541

68-

5 inch Props

• One pair 5030 EP direct drive 5x3 propellers, black
• 1 pair 5030 EP direct drive 5x3 propellers, green
• One pair 5030 EP direct drive 5x3 propellers, orange

79-

1000Kv Motors

• A2212 1000kV brushless motor

89-

FPV Goggles

• Fatshark Dominator V3 Modular 3D FPV Headset Goggles
• Fatshark Teleporter V3 RTF FPV Headset System with Camera and 5.8G TX
• Eachine VR-007 FPV goggles 5.8G 40CH

93-

Compatible with Arduino® Development Boards

• Nano Module V3.0 development board compatible with Arduino®
• Arduino® UNO R3 development board compatible with Arduino
• ATMEGA328P Pro Mini 328 Mini 5V/16MHz Arduino® Compatible board
• Arduino® UNO R3 compatible development board (with usb cable)
• Arduino Compatible Atmega2560 R3 Development board
• Arduino Uno R3 Compatible board with USB cable
• Digispark ATTINY85 Arduino development board with micro USB
• Digispark ATTINY85 Arduino USB development
• LilyPad Arduino 328 ATmega328P compatible board
• Arduino UNO R3 compatible development board with 400point bread board and power module (without USB cable)
• MH-Tiny ATTINY88 development module Nano v3.0 micro USB
• STM32F103C8T6 ARM STM32 minimum system development board module compatible with Arduino
• Sigma Micro SGL8022W single-channel touch chip for LED light regulation for Arduino
• GY Attiny85 Digispark Kickstarter mini USB development board module Tiny85

98-

100-800mAh Batteries

• 1S 3.7V 100mAh battery for CX-10 or other micro drones
• Eachine H8 3.7V 260mAh 1S LiPo battery
• Eachine H8 mini 3.7V 150mAh 1S LiPo battery
• 3.7V 380 mAh LiPo battery for mini drone

99-

TX RX Accessories

• Turnigy Transmitter Glove (2.4 GHz/Neckstrap Ready)
• Walkera Runner 250 Quadcopter Receiver Antenna Fixing Mount 250-Z-29
• OrangeRX Silicone Protection Cover for Non-Satellite Receivers
• V-Type Receiver Antenna Pedestal Fixing Mount
• Antenna range booster for DJI Phantom 3, 4, and Inspire 1, 2
• Signal Range Booster for DJI Phantom 3 Standard

133-

Raspberry Pi Case

• Raspberry Pi 3 Official Case - Black
• Raspberry Pi 3 Official Case - White

156-

IC (integrated Circuits)

• L298 dual full-bridge driver L298 Multiwatt 15
• 8-digit LED display driver MAX7219CNG

160-

Development Boards

• Raspberry Pi 2 Model B 1GB RAM

168-

Microphone

• Electret Microphone Inserts, 6050 PCB Pins, Condenser Electronic (5 pcs)

175-

Car Kit

• Elegoo Smart Robot Car Kit v3.0 compatible with Arduino Uno

178-

1S Batteries (3.7V)

• 1S 3.7V 100mAh battery for CX-10 or other micro drones
• Eachine H8 3.7V 260mAh 1S LiPo battery
• Eachine H8 mini 3.7V 150mAh 1S LiPo battery
• 3.7V 380 mAh LiPo battery for mini drone

182-

SimonK Firmware

• 30A Brushless ESC SimonK firmware
• 4x 30A Brushless ESC SimonK firmware (bullet connector)
• Afro ESC 12Amp Ultra Lite ESC (SimonK Firmware) V3
• Afro ESC 30 Amp Opto Multi-rotor Motor Speed Controller (SimonK Firmware)
• Afro ESC 30 Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
• 4x Emax SimonK 12A Brushless ESC Speed Controllers
• 12A SimonK firmware brushless ESC with BEC
• 12A Brushless ESC SimonK firmware
• 12A Emax ESC Simonk firmware

187-

ESC Tools

• HJ Servo and ESC Consistency Tester
• DYS ESC USB Linker ESC programmer
• 3ch ESC Servo Tester RJX-385

190-

LED (light Emmiting Diod)

• 30 pieces 5mm LED: 10 red, 10 green, 10 yellow light diodes
• 30 pieces 3mm LED: 10 red, 10 green, 10 yellow light diodes
• 50 pieces 5mm bright white LEDs
• 10 pieces 5mm blue LEDs
• 10 pieces 5mm green LEDs
• 10 pieces 5mm red LEDs
• 10 pieces 5mm yellow LEDs
• 10 pieces 5mm white LEDs
• 10 pieces 5mm blue LEDs (colorless when off)
• 10 pieces 5mm orange LEDs
• 10 pieces, 3mm blue LEDs
• 10 pieces 3mm green LED
• 10 pieces 3mm red LEDs
• 10 pieces 3mm yellow LEDs
• 5 pcs 5mm 4-pin RGB common anode LEDs

14-

Camera Gimbal

• Metal Camera Gimbal GoPro Hero3 Mount for DJI Phantom (silver)
• Feiyutech FY WG 3-Axis Wearable Gimbal
• Metal Camera Gimbal GoPro Hero3 Mount for DJI Phantom (black)
• My Mini 2D 2-Axis Brushless GoPro Gimbal
• FY Handheld Telescopic Stick for GoPro
• BGC 3.0 MOS brushless motor 2-axis gimbal controller

21-

Robot Kit

• Elegoo Smart Robot Car Kit v3.0 compatible with Arduino Uno

28-

Transmiter Receivers

• Radio Telemetry 915MHz kit for APM 2.6, 2.5, Pixhawk

69-

6 inch Props

• Ghost 6030 Black Propellers, Set of 4 (CW/CCW)
• Ghost 6030 Red Propellers for Night Flying LED Illumination
• Ghost 6030 Orange Propellers for Night Flying LED Illumination
• Ghost 6030 Blue Propellers for Night Flying LED Illumination
• A pair of 6045 propeller 6x4.5 props, CW/CCW, black
• A pair of 6045 propeller 6x4.5 props, CW/CCW, green
• A pair of 6045 propeller 6x4.5 props, CW/CCW, orange

75-

12A ESC

• 12A Emax ESC BlHeli firmware
• Afro ESC 12Amp Ultra Lite ESC (SimonK Firmware) V3
• 4-in-1 ESC Favourite SKYIII Quattro 12A Brushless Quadcopter BEC BLHeli
• 4x Emax SimonK 12A Brushless ESC Speed Controllers
• 12A SimonK firmware brushless ESC with BEC
• 12A Brushless ESC SimonK firmware
• 12A Emax ESC Simonk firmware

78-

CC3D Flight Controller

• CC3D OpenPilot flight controller board
• CC3D OpenPilot flight controller board

80-

2300Kv Motors

• 4x Emax MT2204 2300KV brushless motors
• Emax MT2204 2300KV brushless CW (original in box)
• Emax MT2204 2300KV brushless CCW (original in box)
• 4x Emax MT2204-II 2300KV Air-Cooling Brushless Motor

86-

USB tools

• FTDI USB 3.3V/5.5V to TTL Serial Adapter Module
• PL2303 USB-to-RS232 TTL Converter Adapter Module
• USB 2.0 to TTL UART module, 5-pin serial converter CP2102
• TTL USB 2.0 to 6-pin CH340G Converter for STC Arduino Pro
• USB to RS232 TTL UART PL2303HX adapter cable
• CP2102 USB 2.0 to TTL UART 6-pin Serial Converter
• USB to ESP8266 Serial Wireless WiFi Module Development Board
• 3 USB to RS232 TTL Converter Adapter Module
• TTP224 4-way capacitive touch switch module digital touch sensor for Arduino
• L298P Shield R3 DC Motor Driver Module 2A H-bridge 2-way for Arduino
• USB 2.0 Type-A 4-pin male plug adapter connector jack with black plastic cover
• TTL USB 2.0 to 5-pin PL2303 Converter USB programmer

96-

Bind-N-Fly (BNF)

• Walkera Runner 250 FPV quadcopter (BNF)

177-

Silicon Controlled Rectifier SCR

• TYN612 Standard 12A Silicon Controlled Rectifier SCR TO-220AB
• TYN612 Standard 12A Silicon Controlled Rectifier SCR TO-220AB

179-

2S Batteries (7.4V)

• Transmitter LiPo battery 11.1V 2200mAh (Walkera, RadioLink, Futaba, FlySky)
• Turnigy 5000mAh 2S 7.4V 60C hardcase pack
• Zippy Compact 4000mAh 2S 25C LiPo Battery Pack
• Turnigy 2200mAh 2S 30C LiPo battery pack
• Zippy Flightmax 2200mAh 2S 20C
• Zippy 4000mAh 2S1P 25C car LiPo (ROAR approved)
• Zippy 5200mAh 2S2P 30C hard-case LiPo pack (ROAR approved)
• Zippy Flightmax 1800mAh 2S 20C LiPo Battery

183-

BLheli Firmware

• 4-in-1 ESC Favourite SKYIII Quattro 12A Brushless Quadcopter BEC BLHeli
• DYS 16Amp Micro Opto BLHeli Multi-Rotor ESC (BLHeli Firmware)
• DYS 20A ESC BLHeli/SimonK firmware (Tiny)
• Favorite Littlebee 20A 2-4S ESC (No BEC)
• EMax 20A BLHeli ESC with 2A/5V BEC

185-

Sensors Modules

• DHT11 temperature and relative humidity sensor module, Arduino
• Hall sensor, Hall switch, speed counting module, position sensing module
• Ultrasonic HC-SR04 transducer sensor for Arduino
• BMP180 Digital Barometric Pressure Sensor Module for Arduino
• High-sensitivity sound detection module for Arduino, AVR, PIC
• HC-SR501 Infrared PIR Motion Sensor Module, Arduino, Raspberry Pi
• Light Intensity Sensor Module for Arduino
• SW-420 Vibration Sensor Module for Arduino
• IR Infrared Obstacle Avoidance Sensor Module for Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• APDS-9960 RGB Gesture Sensor I2C module for Arduino (6-pin)
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• Infrared IR Wireless Remote Control + Infrared Receiver Module + Infrared Transmitter Kit for Arduino
• GP2Y0A21YK0F Sharp IR analog distance sensor, distance 10-80 cm cable for Arduino
• 4-piece RGB LED module for Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino (6-pin)
• AMS1117 5V to 3.3V converter module
• Ultrasonic HC-SR04 module sensor distance measuring board with mount
• E18-D80NK Infrared Obstacle Avoidance Proximity Sensor
• ACS712 Hall-Effect 30A Current Sensor for Arduino
• VL53L0X Time-of-Flight Distance Sensor Breakout GY-VL53L0XV2V Module, Arduino
• AM2320 Digital Temperature and Humidity Sensor. Original authentic. Can replace SHT20, SHT10.
• DHT11 temperature and relative humidity sensor module, Arduino (bare sensor)
• AM2301 Digital Temperature and Humidity Sensor Module
• ASAIRE AM2320B digital temperature and humidity sensor
• 1.5A 2-way dual H-bridge DC and stepper L298N motor driver module for Arduino
• Flame Sensor Module for Arduino
• Dual Motor Driver TB6612FNG, 1A per channel
• GY-530 VL53L0X IIC I2C ToF time-of-flight ranging distance sensor, 4+2 pins (blue)
• Maxim Integrated DS18B20 programmable 1-Wire digital thermometer, 3-pin TO-92
• BME280 Digital Relative Barometric Pressure and Humidity Sensor Module for Arduino
• Waterproof 18B20 temperature probe, temperature sensor, stainless steel package
• MCP4725 digital-to-analog converter DAC I2C module for Arduino and Raspberry Pi
• 433MHz LoRa SX1278 long-range RF wireless module DRF1278F for Arduino and Raspberry Pi
• ACS712 Hall-Effect 20A Current Sensor for Arduino
• ACS712 Hall-Effect 5A Current Sensor for Arduino
• CJMCU-531 VL53L1X ToF time-of-flight 400cm ranging distance sensor - 6-pin
• Toshiba TB6612FNG dual motor driver carrier
• MPR121 12-channel proximity capacitive touch sensor controller with I2C for Arduino and Raspberry Pi
• VL6180 proximity sensing module, 0-620 mm, 5V laser distance sensor
• AS5600 Magnetic Encoder Module
• 2pca AS5600 Magnetic Encoder Module

186-

6S Batteries (22.2V)

• Multistar High-Capacity 6S 10000mAh Multi-Rotor LiPo Pack

191-

LDR (Light depedent Resistor) Photoresistor

• 3 pcs GL5516 photoresistors 5mm LDR

6-

FPV (First Person's View)

• 5.8 GHz Circularly Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV
• High-quality glass fiber FPV monitor mount/display holder
• 700TVL FPV metal case 3.6mm camera
• Boscam FPV 5.8GHz 2000mW 8CH Transmitter and Receiver
• 7-inch FPV LCD color monitor with sun hood
• Boscam FPV 5.8GHz 600mW 32-channel video transmitter and receiver
• Boscam 5.8 GHz FPV Diversity LCD Receiver RX-LCD5802
• 7-inch LCD FPV monitor, built-in LiPo battery, 5.8 GHz
• FPV Combo 5.8GHz 200mW 1km TX, RX, LCD, camera kit
• Boscam FPV 2000mW 8CH 5.8GHz Transmitter TS582000
• FPV Boscam transmitter and receiver, 200mW, 1km
• FPV 5.8 GHz antennas TX/RX straight RP-SMA
• Boscam FPV 600mW transmitter and receiver with 7-inch display and camera
• GoPro Hero3, Hero4 FPV Cable, USB to AV Video Cable
• FPV Combo 5.8 GHz 200 mW 1 km Transmitter with Receiver
• Boscam TS832 32CH 5.8G 600mW Wireless AV FPV transmitter
• High-quality 7-inch FPV LCD monitor display sun hood
• Circular Polarized Mushroom Antenna SMA Set, Tx/Rx for FPV
• SkyZone TS5823 5.8GHz 32CH A/V 200mW mini FPV transmitter
• 600TVL 1/4" 1.8mm CMOS FPV 170-degree wide-angle lens camera
• Tarot 600TVL FPV mini digital camera for mini drones
• Light L250 5.8 GHz 250 mW VTX FPV transmitter attached to GoPro
• Walkera Runner 250 - 5.8GHz Mushroom Antenna (SMA)
• Clover-Leaf Mushroom Circularly Polarized Antenna TX, 5.8 GHz (RP-SMA)
• 5.8 GHz 32CH 600 mW Super Mini A/V FPV Transmitter
• FPV Cloverleaf 5.8 GHz TX and RX L-shaped circularly polarized antenna
• 5.8 GHz circularly polarized mushroom L-shape antenna RP-SMA
• 5.8 GHz Circularly Polarized Mushroom FPV Antenna, Straight RP-SMA
• 5.8 GHz RC305 FPV 8-channel receiver for RC quadcopter drones
• Adapter RP-SMA male jack to SMA female connector
• FPV GoPro power and video cable for TS832 transmitter
• Fatshark Dominator V3 Modular 3D FPV Headset Goggles
• Fatshark Teleporter V3 RTF FPV Headset System with Camera and 5.8G TX
• Fatshark 700TVL V2 WDR CMOS camera
• FatShark 5.8GHz Cased FPV Transmitter
• FatShark Dominator 5G8 24ch NexwaveRF receiver module
• Mobius ActionCam 1080p HD video camera set with live video out
• Fatshark Filtered FPV Transmitter Power Supply (2S/3S/4S)
• SMA Male to SMA Female 180mm aerial extension cable
• 700TVL 2.8mm lens Sony CCD FPV camera
• Walkera Runner 250 Z-20 TX5816 transmitter
• SMA jack to RP-SMA plug right-angle adapter connector
• RP-SMA jack to SMA plug FPV connector
• RP-SMA jack to SMA plug right-angle FPV connector
• Little Pilot 5-inch 5.8 GHz FPV Monitor with mushroom antenna and built-in battery
• RunCam HD Full HD 1080p 120-degree FPV camera recorder
• Boscam TR1 FPV camera recorder with 5.8 GHz transmitter
• Walkera Runner 250 HD Mini Camera
• FPV 5.8GHz Clover 3-blade TX with 4-blade RX RP-SMA Straight Antenna
• Quantum Q58-2 40-channel 200mW FPV Transmitter with Antenna
• Aomway 5.8GHz 4-Leaf Clover Antenna Set for TX/RX (RP-SMA)
• Aomway 5.8GHz 4-Leaf Clover FPV Antenna Set for TX/RX (RP-SMA)
• 1000TVL Micro-Compact 2.8mm FPV camera
• Eachine 5.8 GHz/2.4 GHz Tx/Rx RHCP FPV mushroom antenna (RP-SMA)
• Eachine VR-007 FPV goggles 5.8G 40CH
• Complete FPV kit with 200mW transmitter, monitor, camera, and receiver
• Pan/Tilt Camera Mount with 2 Servos for FPV
• I saw Edge Action 4K Action Camera
• 2.5mm jack to RCA FPV cable, 20cm
• Echelon CCD 1000TVL 110-degree FPV camera
• Boscam FPV 5.8GHz RC832 receiver
• SMA Female to u.FL/IPX/IPEX RF Coax Adapter Assembly RG178 Pigtail 8" (20cm)
• RP-SMA Female to uFL/u.FL/IPX/IPEX RF Coaxial Adapter Assembly RG178 Pigtail 8" (20cm)
• SMA male to RP-SMA male plug 150mm aerial extension cable

15-

Electronic Components

• FTDI USB 3.3V/5.5V to TTL Serial Adapter Module
• 2-pcs 40-pin 1x40 single-row male 2.54 breakable pin header connector
• L298 dual full-bridge driver L298 Multiwatt 15
• PL2303 USB-to-RS232 TTL Converter Adapter Module
• USB 2.0 to TTL UART module, 5-pin serial converter CP2102
• 10 pieces 2N2222 NPN transistors and 10 pieces 2N2907 PNP transistors
• TTL USB 2.0 to 6-pin CH340G Converter for STC Arduino Pro
• Mini DC-DC 2A Converter, Step-Down, Adjustable
• Mini USB Male to USB 2.0 Female 90-degree Right Angle
• 5 pairs 28mm alligator clips
• 2 pieces 5V active continuous buzzer 12mm x 10mm
• USB to RS232 TTL UART PL2303HX adapter cable
• Double-sided prototype PCB, 5cm x 7cm board
• Solderless MB-102 breadboard 830
• 5 pcs tactile 6x6x5mm push button microswitch 4-pin
• 10 pieces 2N2907 PNP transistor TO-92
• LM7805 +5V Linear Voltage Regulator
• LM317 Variable Voltage Regulator, 1.2V to 37V, 1.5A
• 10pcs IC NE555 timer DIP-8 from Robojax on Amazon
• LM741 Op-Amp operational amplifier DIP-8
• 2 pieces 8-pin IC socket, solder type
• Two 16-pin IC socket adapters, solder type
• 2 pcs 2W10 2A bridge rectifier diodes
• 10 pieces 1k ohm 0.25W 5% carbon film resistors
• C51 4-bit Digital Electronic Clock DIY for education
• 5x DIY prototype PCB universal matrix circuit board, 5x7 cm
• 1000 µF 25V radial electrolytic capacitor, 10 x 17 mm
• 10x 1N4007, 1A, 1000V diode
• DC-DC boost converter, 1-5V to 5V, 500mA
• 9V battery cable for Arduino
• 0.36-inch 4-digit 7-segment display (common cathode LED), 9.2 mm
• 4 pcs 0.56-in 14.2 mm common anode 1-digit 7-segment red LED
• 30 pieces 5mm LED: 10 red, 10 green, 10 yellow light diodes
• 30 pieces 3mm LED: 10 red, 10 green, 10 yellow light diodes
• 50 pieces 5mm bright white LEDs
• 10 pieces 5mm blue LEDs
• 10 pieces 5mm green LEDs
• 10 pieces 5mm red LEDs
• 10 pieces 5mm yellow LEDs
• 10 pieces 5mm white LEDs
• 2 pcs 40-pin 2.54 mm female header
• 8-digit LED display driver MAX7219CNG
• 2 pcs 40-pin 2.54 mm right-angle male pin header connector
• CP2102 USB 2.0 to TTL UART 6-pin Serial Converter
• LM2596 DC-to-DC 1.3-37V 2A Adjustable Voltage Regulator
• 3A 1000V diode bridge rectifier KBP307
• 10A10 10A 1000V diode rectifier
• 10pcs NE555 timer SMD IC SOP-8 from Robojax on Amazon
• 10 pieces 5mm blue LEDs (colorless when off)
• 5 pcs. SMD key push-button switch 6x3x2.5mm
• 6-bit DIP switch 2.54 mm DS-06
• 2 pcs. 4-bit DIP switch 2.54 mm DS-04
• 3-bit DIP switch 2.54 mm DS-03
• DPDT push-self-lock switch, 6-pin, 7x7mm
• 2 pcs. PCB 2-position SPDT miniature slide switch SK12D07VG3
• DC 5.5 x 2.1mm power jack socket, PCB mount
• 2 pcs. Push-button flashlight power switch 1208YD
• 5 pcs tactile push button switch 6x6x5mm 2-pin
• 2 pcs mini USB SMD 5-pin connector
• 10 pcs BC547 TO-92 30V low-power NPN transistor
• TIP120 TO-220 Darlington NPN transistors
• 8-bit 8-position DIP binary switch
• 2 pcs 24-pin DIL IC socket, Arduino IC socket
• 10 pieces 5mm orange LEDs
• 10 pieces, 3mm blue LEDs
• 10 pieces 3mm green LED
• 10 pieces 3mm red LEDs
• TIP125 TO-220 Darlington transistors PNP
• 3 pcs GL5516 photoresistors 5mm LDR
• 10 pieces 3mm yellow LEDs
• 5 pcs 5mm 4-pin RGB common anode LEDs
• 5 pcs 5mm infrared transmitting LEDs
• 5 pcs 5mm 940nm infrared receivers
• 0.56-inch, 1-digit common cathode 7-segment red display
• 2 pcs 0.56-inch 2-digit common cathode 7-segment red display
• D303 SYB-170 mini solderless prototype breadboard
• 2 pcs MJL06-1 1-40 pF variable capacitor
• 2 pcs MJL4281 1-10 pF variable capacitor
• 2 pcs MJL4281 1-20pF variable capacitor
• 2 pcs MJL4281 1-60pF variable capacitor
• 2N2007 MOSFET N-Channel TO-92 Transistor
• 10 pcs 1N4148 small signal diodes
• LM386N-1 low-voltage audio power amplifier
• 9V battery snap connector with a 15cm cable
• 10 pcs 1N4001 50V 1A SMD diodes
• LM327L 3-terminal 0.1A positive adjustable regulator
• 2 pcs MB6F 600V 0.5A SOP-4 SMD rectifier diode bridges
• DIP exclusion 9-pin 1k ohm resistor array
• DIP exclusion 9-pin 220-ohm network resistor array
• DIP exclusion 9-pin 330-ohm network resistor array
• 5 pcs BC548 TO-92 NPN general purpose amplifier
• 5 pcs BC558 TO-92 PNP epitaxial silicon transistors
• Switch, Single-Pole, Double-Throw (SPDT), ON-ON, 6A, MTS-102
• 10k ohm WH148 potentiometer, 15mm shaft
• 100k ohm WH148 potentiometer, 15mm shaft
• 500k ohm WH148 potentiometer, 15mm shaft
• 500-ohm potentiometer trimmer
• 20k ohm potentiometer trimmer
• 1M Ohm potentiometer trimmer
• 50k Ohm Vertical Potentiometer Trimmer
• 200k Ohm Vertical Potentiometer Trimmer
• 2k Ohm Vertical Potentiometer Trimmer
• 100k Ohm Vertical Potentiometer Trimmer
• 10k Ohm Vertical Potentiometer Trimmer
• 100 Ohm Vertical Potentiometer Trimmer
• 500k Ohm Vertical Potentiometer Trimmer
• 200 Ohm Vertical Potentiometer Trimmer
• 1k Ohm Vertical Potentiometer Trimmer
• 5k Ohm Vertical Potentiometer Trimmer
• 10k ohm vertical potentiometer, side-adjust trimmer
• 1k Ohm Vertical Potentiometer, side-adjust trimmer
• 5k Ohm Vertical Potentiometer, side-adjust trimmer
• 100 Ohm Vertical Potentiometer, trimmer, side-adjust
• 50k Ohm Vertical Potentiometer, trimmer, side-adjust
• 100k ohm vertical potentiometer, side-adjust trimmer
• 1M Ohm Vertical Potentiometer, side-adjust trimmer
• 200k ohm vertical potentiometer, side-adjust trimmer
• 500 Ohm Vertical Potentiometer, side-adjust trimmer
• 500k ohm vertical potentiometer, side-adjust trimmer
• 20k Ohm Vertical Potentiometer, side-adjust trimmer
• 200 Ohm Vertical Potentiometer, side-trimmer
• 2k Ohm Vertical Potentiometer, trimmer, side-adjust
• USB to ESP8266 Serial Wireless WiFi Module Development Board
• SG90 mini servo motor
• 3296 Multi-turn Potentiometer, 1k ohm
• 3296 Multi-turn Potentiometer, 20k ohm
• 3296 Multi-turn Potentiometer, 100k ohm
• 3296 Multi-turn Potentiometer, 5k ohm
• 3296 Multi-turn Potentiometer, 2k ohm
• 3296 Multi-turn Potentiometer, 10k ohm
• 3296 Multi-turn Potentiometer, 50k ohm
• 3296 Multi-turn Potentiometer, 500k ohm
• 3296 Multi-turn Potentiometer, 200k ohm
• 3296 Multiturn Potentiometer, 100 ohm
• 3296 Multi-turn Potentiometer, 200 ohm
• 3296 Multi-turn Potentiometer, 500 ohm
• 400-Point Solderless Breadboard
• MG996R metal-gear digital servo
• Electret Microphone Inserts, 6050 PCB Pins, Condenser Electronic (5 pcs)
• Two pairs DC 5.5x2.1mm power jack, male and female
• IRFP150N, IRFP150NPBF 42A/100V TO-247 MOSFET
• 3 USB to RS232 TTL Converter Adapter Module
• TTP224 4-way capacitive touch switch module digital touch sensor for Arduino
• L298P Shield R3 DC Motor Driver Module 2A H-bridge 2-way for Arduino
• TIP120 and TIP125 TO-220 Darlington transistors, NPN and PNP
• PC817B optocoupler phototransistor, DIP-4
• 1N5406 3A 600V diode
• BT137-600 Triac 8A
• BT136-600 Triac 4A
• 2pcs 4N35 FSC optocouplers, phototransistor, 30V DIP6 IC
• 10PCS BC817-40 NPN transistor, 500mA, 45V, SOT23, NXP
• 10 pcs 2N3906 SMD PNP transistor SOT-23
• 10 pcs tactile 6x6x6mm push button microswitch 4-pin
• 10 pcs tactile 6x6x7mm push button microswitch 4-pin
• 10 pcs tactile 6x6x9mm push button microswitch 4-pin
• 10 pcs tactile 6x6x10mm push button microswitch 4-pin
• 10 pcs tactile 6x6x13mm push button microswitch 4-pin
• 5pcs PBS-110 on/off mini push button lockless momentary switch (black)
• 5 pcs PBS-110 ON/OFF mini push-button lockless momentary switch (red)
• 10 pcs 3mm infrared transmitting LEDs and 3mm infrared receiver LEDs
• 2-pc 9V battery cable for Arduino
• 10 pieces 2N2222 NPN transistors
• 78M12 12V DC precision 500 mA regulator TO-252 (DPAK)
• 78M09 9V DC precision 500 mA regulators, TO-252 (DPAK)
• X9C104P SOP-8 100k ohm digitally controlled potentiometer (XDCP)
• Pair of TIP41C NPN and TIP42C PNP complementary power transistors, 6A, 100V
• BS170 Single N-Channel Small Signal MOSFET 60V 500mA 5 TO-92 (TO-226)
• IRF510 N-channel 5.6A 100V TO-220 power MOSFET
• 3 x 6 x 2.5mm Tactile Push Button Switch, Tact 2-Pin, Micro SMD
• V5 Sensor Shield Expansion Board for Arduino UNO R3
• IRF540N, IRF540, TO-220, N-Channel, 33A, 100V Power MOSFET
• 600:600-ohm audio transformers, 1:1 EI14 isolation transformer, double-wire winding
• USB 2.0 Type-A 4-pin male plug adapter connector jack with black plastic cover
• KBPC5010 50A single-phase bridge rectifier, 50 to 1000 volts
• X9C104P DIP-8 100k ohm digitally controlled potentiometer (XDCP)
• IRF520N, IRF520, TO-220, N-channel, 9.2, 100V, power MOSFET
• 8-pin DIP-8 round IC socket
• Rotary Encoder Module for Arduino or Raspberry Pi
• Miniatronics 18C0310 1.5V 1.2 mm Clear Lamps
• TCRT5000L reflective optical sensor infrared IR switch
• IN5822 40V 3A Schottky diode
• 2N3906 General Purpose PNP Transistor TO-92
• 2N7000 MOSFET, N-channel, 60V, 0.2A, TO-92
• 1N5817 20V 1A Schottky diode
• 10 pcs 1N5819 SS14 40V 1A Schottky rectifier diodes SMA DO-214AC SMD
• 10pcs 1N5822 SS24 DO-214AA SMB Schottky diode 2A 40V
• 10 pcs Robojax 2N2907 PNP transistor TO-92
• 10pcs 2N3904/MMBT3904 SOT-23 SMD NPN transistors
• L293D Quadruple Half-H Driver DC Motor Controller
• Insulation Bushing Washer for TO-220 transistor
• 2P4M NEC TO-202 2A 400V SCR Thyristor
• Dual Full-Bridge DC Motor Driver Shield Expansion Board L298N 2A Drive Module for Arduino
• KBU808 SIP-4 8A 800V bridge rectifier
• 10 pcs BC327-25 PNP TO-92 500mA 45V transistors
• IRFZ44N, IRFZ44 N-channel power MOSFET
• TL082 Wide-Bandwidth Dual JFET Input Operational Amplifier
• Red Mushroom Cap 1NO 1NC DPST Emergency Stop Push Button Switch
• CD4017 decade counter IC, DIP-16
• LM324N Low-Power Quad Operational Amplifier DIP-14
• 1N5408 3A 1000V diode
• PAM8403 5V 3W stereo audio amplifier module with volume control
• IRF9540 P-channel power MOSFET, 23A, 100V, TO-220
• TCRT5000L TCRT5000 reflective optical sensor infrared module for Arduino
• KW12-3 Micro Roller Lever Arm Normally Open Close-Limit Switch
• Analog Servo and HC-SR04 Ultrasonic Module Mounting Bracket Kit
• Toroidal Core 100µH inductors Wire 6A
• LM35 3-pin temperature sensor
• TTL USB 2.0 to 5-pin PL2303 Converter USB programmer
• TF Card U Disk MP3 Format Decoder Amplifier Decoding Audio Player Module
• 4x4 Matrix Numeric Keypad, 16 buttons, 0-9 and A-D
• LM336-2.5 Programmable Shunt Regulator, Low Temperature Coefficient 2.5V Reference
• 10 pieces 2N5551 high-voltage NPN transistor 160V (CE)
• CH340G RS232-to-TTL USB serial port module, 3.3V and 5V
• 10 pcs 1N914 small signal diodes
• 4x4 Matrix Numeric Keypad, 16 buttons, 0-9 and A-D (soft)
• 4x3 Matrix Numeric Keypad, 12 buttons: 0-9, *, and #
• DPDT push-self-lock switch, 6-pin, 8x8mm
• L7812 12V 1.5A voltage regulator TO-220
• BT16-600B Triac, 600V, 16A
• IRFP260N HEXFET power MOSFET, 200V, 50A, TO-247
• 10pcs 2N3904 TO-92 NPN transistors
• Rotary Encoder Module EC11 for Arduino or Raspberry Pi
• IRFP264 HEXFET power MOSFET, 250V, 38A, TO-247
• D25XB60 25A 600V bridge rectifier
• 10pcs Robojax BC548 NPN and 10pcs BC558 PNP TO-92 complementary general-purpose transistors
• 5pcs Diffused RGB (tri-color) LED - Common Anode
• 5pcs Diffused RGB (tri-color) LED - Common Cathode
• Push-button module for Arduino and Raspberry Pi
• PAM8403 module super digital amplifier board, 2 x 3W Class D digital amplifier board
• MCP23017 Serial Interface Module I2C SPI MCP23S17 Bidirectional 16-bit I/O Expander Pins 10MHz Serial Interface Module
• ESP32 Development Board, WiFi+Bluetooth, Ultra-Low Power Consumption, Dual Core (30-pin)
• Female SMA jack PCB mount straight RF connector
• Male RP-SMA jack PCB mount straight RF connector
• ESP32 Development Board, WiFi+Bluetooth, Ultra-Low Power Consumption, Dual Core (38-pin)
• 2000W AC Motor Speed Control, 50-220V, BTA16-600B Triac
• 2N2222 NPN transistor metal can TO-18
• 0.36-inch 4-digit 7-segment display (common anode LED), 9.2 mm
• Limit switch, long straight OV-153-1C25 hinge lever type SPDT microswitch
• BT16-800B Triac, 800V, 16A, snubberless, standard 16A triacs
• TYN612 Standard 12A Silicon Controlled Rectifier SCR TO-220AB
• TYN612 Standard 12A Silicon Controlled Rectifier SCR TO-220AB
• 50N06, SFP50N06, FQP50N06, KIA50N06: 50A, 60V N-channel power MOSFET, TO-220
• 50N06, SFP50N06, FQP50N06, KIA50N06: 50A, 60V N-channel power MOSFET TO-263
• LM393 low-power, low-offset voltage dual comparator op-amp
• LM358 dual standard operational amplifier op-amp
• KBPC3510 50A single-phase bridge rectifier, 35 to 1000 volts
• KBPC1010 10A single-phase bridge rectifier, 35 to 1000 volts
• TL431 2.5-36V programmable precision voltage reference TO-92
• IRFP640 TO-220 power MOSFET
• IRF3205 TO-220 power MOSFET
• IRF740 TO-220 power MOSFET
• IRF9405 TO-220 Power P-Channel -100V 13-19A MOSFET

50-

Transmiter with Receiver

• FlySky FS-TH9X 2.4G 9CH Transmitter Set with Receiver
• FlySky FS-i6 2.4G 6CH transmitter with receiver
• Flysky FS-T6 6ch 2.4GHz transmitter, receiver
• Turnigy 9X 9-channel transmitter with module and 8-channel receiver, Mode 2
• Radiolink 2.4G AT9 9ch transmitter with RD9 receiver
• FlySky 2.4GHz FS-CT6B 6CH quadcopter FPV transmitter with receiver
• Walkera Devo 7 2.4GHz 7CH LCD transmitter with receiver
• Walkera DEVO10/DEVO 10 2.4G 10CH Radio Transmitter and Receiver
• FrSky 2.4 GHz ACCST Taranis X9D Plus with receiver

67-

9 inch Props

• 9-inch CW/CCW Propeller Prop for DJI Phantom 1, 2, 3
• 9-inch carbon fiber propeller DJI Phantom 2 Vision+
• Two pairs of 9-inch 9443 carbon fiber self-tightening propellers for DJI Phantom 2 Vision+
• Two pairs of 9-inch 9443 self-tightening CW/CCW propellers for DJI Phantom 1, 2, 3
• 1 Pair Original Walkera QR X350 PRO-Z-01 Propeller (white)
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) blue
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) red
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) black
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW), white
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) orange

77-

16A ESC

• DYS 16Amp Micro Opto BLHeli Multi-Rotor ESC (BLHeli Firmware)

81-

920Kv Motors

• 4 x 2212 920 kV for DJI brushless motors
• 2212 920KV Brushless Motor (CW/CCW) for DJI Phantom F330, F450, F550

87-

2400Kv Motors

• 2CW/2CCW ZMR Brushless Motor 1804 2400kV

123-

Switches

• 5 pcs tactile 6x6x5mm push button microswitch 4-pin
• 5 pcs. SMD key push-button switch 6x3x2.5mm
• 6-bit DIP switch 2.54 mm DS-06
• 2 pcs. 4-bit DIP switch 2.54 mm DS-04
• 3-bit DIP switch 2.54 mm DS-03
• DPDT push-self-lock switch, 6-pin, 7x7mm
• 2 pcs. PCB 2-position SPDT miniature slide switch SK12D07VG3
• 2 pcs. Push-button flashlight power switch 1208YD
• 5 pcs tactile push button switch 6x6x5mm 2-pin
• 8-bit 8-position DIP binary switch
• Switch, Single-Pole, Double-Throw (SPDT), ON-ON, 6A, MTS-102
• 10 pcs tactile 6x6x6mm push button microswitch 4-pin
• 10 pcs tactile 6x6x7mm push button microswitch 4-pin
• 10 pcs tactile 6x6x9mm push button microswitch 4-pin
• 10 pcs tactile 6x6x10mm push button microswitch 4-pin
• 10 pcs tactile 6x6x13mm push button microswitch 4-pin
• 5pcs PBS-110 on/off mini push button lockless momentary switch (black)
• 5 pcs PBS-110 ON/OFF mini push-button lockless momentary switch (red)
• 3 x 6 x 2.5mm Tactile Push Button Switch, Tact 2-Pin, Micro SMD
• V5 Sensor Shield Expansion Board for Arduino UNO R3
• Dual Full-Bridge DC Motor Driver Shield Expansion Board L298N 2A Drive Module for Arduino
• Red Mushroom Cap 1NO 1NC DPST Emergency Stop Push Button Switch
• KW12-3 Micro Roller Lever Arm Normally Open Close-Limit Switch
• Analog Servo and HC-SR04 Ultrasonic Module Mounting Bracket Kit
• DPDT push-self-lock switch, 6-pin, 8x8mm
• Push-button module for Arduino and Raspberry Pi
• Limit switch, long straight OV-153-1C25 hinge lever type SPDT microswitch

180-

3S Batteries (11.1V)

• Multistar 3S 5200mAh LiPo battery 10-20C pack (XT60 plug)
• Multistar 3S 5200mAh LiPo battery 10-20C for QR-350 Pro
• Multistar High-Capacity 3S 4000mAh LiPo Battery 10-20C (XT60 plug)
• Turnigy 2200mAh 3S 20C LiPo battery (XT60 plug)
• Turnigy nano-tech 3000mAh 3S 25~50C LiPo pack
• Turnigy nano-tech A-SPEC G2 1800mAh 3S 65-130C LiPo Pack
• Turnigy 2200mAh 3S 30C LiPo battery pack (XT60)
• Zippy Compact 2200mAh 3S 25C LiPo Pack (XT60)
• Turnigy nano-tech 1300mAh 3S 45-90C LiPo Battery Pack (XT60)
• Turnigy nano-tech A-SPEC G2 1000mAh 3S 60~90C LiPo Battery
• Turnigy nano-tech 850mAh 3S 45-90C LiPo battery
• Turnigy nano-tech 1000mAh 3S 25~50C LiPo pack
• Turnigy 2650mAh 3S 1C LiPo Tx pack for Futaba and JR
• Turnigy 1000mAh 3S 25C LiPo battery
• Zippy Compact 1500mAh 3S 25C LiPo battery
• Turnigy Bolt 850mAh 3S 11.1V 65~130C LiPo battery
• Turnigy Bolt 2200mAh 3S 11.4V 65-130C High-Voltage LiPo Pack (LiHV)
• Turnigy 3300mAh 3S 20C LiPo battery
• Zippy Compact 3300mAh 3S 35C LiPo Pack
• Zippy Compact 1800mAh 3S 25C LiPo Battery Pack
• Turnigy Graphene 2200mAh 3S 45C LiPo pack with XT60
• MultiStar Racer Series 1400mAh 3S 40-80C LiPo battery (XT30)
• Zippy Flightmax 2100mAh 3S 35C LiPo Battery
• Turnigy nano-tech 1300mAh 3S 25-50C LiPo Battery
• Zippy Compact 2200mAh 3S 35C LiPo Pack (XT60)

192-

IR (Infrared)

• 5 pcs 5mm infrared transmitting LEDs
• 5 pcs 5mm 940nm infrared receivers
• 10 pcs 3mm infrared transmitting LEDs and 3mm infrared receiver LEDs

11-

Frames

• Quadcopter 450 frame with landing gear
• X525 quadcopter folding 600mm frame
• Tarot 680 PRO Hexacopter Folding Frame 3K Carbon
• Glass Fiber Landing Gear with Anti-vibration Cushion for DJI F450 F550
• F550 Hexacopter with carbon fiber landing gear
• Mini Quad Fiber Glass ZMR250 FPV Racer Frame
• 250mm Quadcopter FPV/Racing fiberglass frame with long landing gear
• 310mm Quadcopter FPV/Racing fiberglass frame with long landing gear
• Spidex 220 FPV Quad Frame by Quaternium (Kit)
• HMF U580 Carbon Fiber Folding Quadcopter Kit
• Landing gears for quadcopter, hexacopter
• Tarot TL280C Space Through Machine FPV full carbon fiber (orange) frame
• F-450 F-550 Frame Replacement Arm
• Original Walkera Runner 250 Advanced Battery Fixed Plate Runner 250(R)-Z-04
• Walkera Runner 250 Battery Fixed Plate 250-Z-06
• Walkera Runner 250-Z-03 bottom main board

66-

10 inch Props

• 1 pair 1045 CW CCW propeller 10x4.5 orange
• 1 pair 1045 CW CCW propellers 10x4.5 red
• 1 pair 1045 CW CCW propeller 10x4.5 black
• 1 pair 1045 CW CCW propeller 10x4.5 yellow

73-

Gimbal for Camera

• Feiyutech FY WG 3-Axis Wearable Gimbal

74-

Gimbal for Drone

• Metal Camera Gimbal GoPro Hero3 Mount for DJI Phantom (silver)
• Metal Camera Gimbal GoPro Hero3 Mount for DJI Phantom (black)
• My Mini 2D 2-Axis Brushless GoPro Gimbal

102-

Other accessories

• Mini GSM GPRS drone tracker
• 4x Diatone 4-color LED decoration light board strip PCB

115-

20A ESC

• DYS 20A ESC BLHeli/SimonK firmware (Tiny)
• Favorite Littlebee 20A 2-4S ESC (No BEC)
• EMax 20A BLHeli ESC with 2A/5V BEC

149-

7 Segment display

• 0.36-inch 4-digit 7-segment display (common cathode LED), 9.2 mm
• 4 pcs 0.56-in 14.2 mm common anode 1-digit 7-segment red LED
• 0.56-inch, 1-digit common cathode 7-segment red display
• 2 pcs 0.56-inch 2-digit common cathode 7-segment red display
• 0.36-inch 4-digit 7-segment display (common anode LED), 9.2 mm

152-

Compatible with Arduino® Kits

• UNO Starter Kit, compatible with Arduino
• 10 Project UNO Starter Base Kit, compatible with Arduino

181-

4S Batteries (14.8V)

• Turnigy nano-tech 1300mAh 4S 45-90C LiPo pack (XT60)
• Multistar High-Capacity 4S 5200mAh Multirotor LiPo Pack
• Turnigy Bolt 1300mAh 4S 15.2V 65-130C LiPo Battery
• Turnigy Bolt 1000mAh 4S 15.2V 65-130C LiPo battery
• Turnigy nano-tech 1300mAh 4S 25-50C LiPo Battery
• Zippy Flightmax 2200mAh 4S 40C LiPo Battery
• Zippy Compact 1300mAh 4S 25C LiPo Pack
• Zippy Flightmax 2200mAh 4S 30C LiPo Pack

4-

Flight Controllers

• APM 2.8 Flight Controller GPS Telemetry Kit
• Flight Controller Anti-vibration Shock Absorber
• APM 2.6 ArduPilot Mega APM 2.6 Flight Control (side connector)
• DJI Naza M Lite GPS Combo Flight Controller
• Naze32 Pro 10-DOF Flight Controller
• KK2.1.5 Multi-rotor LCD Flight Control Board with Case
• APM 2.6 ArduPilot Mega APM 2.6 flight control
• CC3D OpenPilot flight controller board
• Pixhawk PX4 2.4.6 flight controller with M8N GPS + complete kit
• APM 2.8 ArduPilot flight controller
• APM 2.6 ArduPilot flight controller kit with GPS and power module
• Shock absorber kit for CC3D, Naze32, mini APM flight controllers
• APM 2.8 ArduPilot Mega APM 2.8 flight control (side connector)
• Naze32/Flip32 6DOF Flight Controller
• CC3D Flight Controller 8-pin Connection Cable Set (3 cables)
• Naze32 Pro 10-DOF Flight Controller
• CC3D OpenPilot flight controller board
• SP Racing F3 Flight Controller Acro Naze32 6DOF
• Pro Micro ATmega32U4 (ATMEGA32U4-AU) 5V/16MHz module with bootloader

76-

850mAH Lipo Battery

• Turnigy nano-tech 850mAh 3S 45-90C LiPo battery
• Turnigy Bolt 850mAh 3S 11.1V 65~130C LiPo battery

94-

RFID

• Mifare RC522 card reader antenna RFID reader IC card proximity module
• 2 pcs RFID keychain NFC tag 13.56 MHz (Arduino)
• ESP-01, ESP8266, ESP-01S adapter with pins

110-

Servo Cables

• 4x RC 150mm Servo Extension Cord Cable
• Four 10 cm servo receiver cables for quadcopter
• JR Servo Cable Y-split 15cm extension cable
• JR Servo Cable Y-split 30cm extension cable
• 4 x 15 cm servo receiver cables, male to male
• 4x RC 100mm Servo Extension Cable
• 4x RC 300mm Servo Extension Cord Cable, JR Male to Female

121-

Gimbal Controller

• BGC 3.0 MOS brushless motor 2-axis gimbal controller

157-

Motor and Shields

• 5V stepper motor with ULN2003 driver board 28BYJ-48 for Arduino
• L298P DC Motor Driver Shield from Robojax on Amazon
• 2 Micro 130 DC motor, 3.3V for Arduino
• VNH2SP30 Stepper Motor Driver shield for Arduino
• Dual VNH2SP30 stepper motor driver shield for Arduino
• 12V DC motor, 13500 RPM, 19mm tiny dual-sided shaft
• Motor stepper driver board ULN2003
• 2pcs I2C PCA9685 16-Channel DC Motor/Servo/LED Driver PWM for Arduino from Amazon
• Amazon Yo-yo
• DC 5V MAX6675 module + K-type thermocouple temperature sensor M6 for Arduino
• L293D Motor Drive Expansion Shield for Arduino Duemilanove, Mega, UNO
• Mini 4-Channel Motor Drive Shield Expansion Board L293D Module, High-Voltage Current Module for Arduino UNO, MEGA 2560
• Infrared Encoder Interrupter Module WYC H2010 Wide-gap
• A4988 Stepper Motor Driver Module
• L9110S H-bridge stepper motor dual DC motor driver controller board for Arduino
• L298N dual H-bridge DC motor driver stepper motor dual channel for Arduino
• 1.5A 2-way dual H-bridge DC and stepper L298N motor driver module for Arduino
• L298N DC Motor Driver Module, Stepper Motor Dual H-Bridge, Max 20W, 2A/Bridge, for Arduino
• Dual Motor Driver TB6612FNG, 1A per channel
• ITR20005 Opto-interrupter 940nm non-contact speed counter/switcher
• Toshiba TB6612FNG dual motor driver carrier
• 3D Printer 42CH Stepper Motor Driver Shield Expansion Board DRV8825/A4988 R3

174-

USB Programmers

• CH340G RS232-to-TTL USB serial port module, 3.3V and 5V

189-

SMD components

• 10pcs NE555 timer SMD IC SOP-8 from Robojax on Amazon
• 5 pcs. SMD key push-button switch 6x3x2.5mm
• 2 pcs mini USB SMD 5-pin connector
• 10 pcs 1N4001 50V 1A SMD diodes
• 2 pcs MB6F 600V 0.5A SOP-4 SMD rectifier diode bridges
• 10PCS BC817-40 NPN transistor, 500mA, 45V, SOT23, NXP
• 10 pcs 2N3906 SMD PNP transistor SOT-23
• 20pcs NE555 timer SMD IC, SOP-8 from Robojax on Amazon

85-

1000mAh Battery

• Turnigy nano-tech A-SPEC G2 1000mAh 3S 60~90C LiPo Battery
• Turnigy nano-tech 1000mAh 3S 25~50C LiPo pack
• Turnigy 1000mAh 3S 25C LiPo battery
• Turnigy Bolt 1000mAh 4S 15.2V 65-130C LiPo battery

109-

Spacer kits

• 6x M3 plastic spacer, standoff, nut, and screw
• 10 pieces M3 10mm white nylon spacers, screws, and nuts

120-

1500mAh Battery

• Zippy Compact 1500mAh 3S 25C LiPo battery

150-

LiPo Battery bag

• LiPo battery safety bag 225x183x3mm
• LiPo Battery safety bag 180 x 70 x 60 mm

151-

LED, IR, Laser, LDR Light

• 30 pieces 5mm LED: 10 red, 10 green, 10 yellow light diodes
• 30 pieces 3mm LED: 10 red, 10 green, 10 yellow light diodes
• 50 pieces 5mm bright white LEDs
• 10 pieces 5mm blue LEDs
• 10 pieces 5mm green LEDs
• 10 pieces 5mm red LEDs
• 10 pieces 5mm yellow LEDs
• 10 pieces 5mm white LEDs
• 10 pieces 5mm blue LEDs (colorless when off)
• 10 pieces 5mm orange LEDs
• 10 pieces, 3mm blue LEDs
• 10 pieces 3mm green LED
• 10 pieces 3mm red LEDs
• 3 pcs GL5516 photoresistors 5mm LDR
• 10 pieces 3mm yellow LEDs
• 5 pcs 5mm 4-pin RGB common anode LEDs
• 5 pcs 5mm infrared transmitting LEDs
• 5 pcs 5mm 940nm infrared receivers
• 10 pcs 3mm infrared transmitting LEDs and 3mm infrared receiver LEDs
• Miniatronics 18C0310 1.5V 1.2 mm Clear Lamps
• TCRT5000L reflective optical sensor infrared IR switch
• TCRT5000L TCRT5000 reflective optical sensor infrared module for Arduino
• 5pcs Diffused RGB (tri-color) LED - Common Anode
• 5pcs Diffused RGB (tri-color) LED - Common Cathode

8-

Battries and Chargers

• iMax B6AC 80W Balance Charger/Discharger (generic)
• iMAX B6 RC Balance Digital Charger/Discharger
• Multistar 3S 5200mAh LiPo battery 10-20C pack (XT60 plug)
• Multistar 3S 5200mAh LiPo battery 10-20C for QR-350 Pro
• Turnigy Neutron 80W touch-screen LiPo battery charger with AC adapter
• Multistar High-Capacity 3S 4000mAh LiPo Battery 10-20C (XT60 plug)
• Turnigy 2200mAh 3S 20C LiPo battery (XT60 plug)
• 60W AC 5A adapter for FPV monitor battery charger
• Lipo Battery Low Voltage Alarm 1S-8S Buzzer
• Turnigy nano-tech 3000mAh 3S 25~50C LiPo pack
• Turnigy nano-tech A-SPEC G2 1800mAh 3S 65-130C LiPo Pack
• Turnigy 2200mAh 3S 30C LiPo battery pack (XT60)
• Zippy Compact 2200mAh 3S 25C LiPo Pack (XT60)
• Turnigy nano-tech 1300mAh 3S 45-90C LiPo Battery Pack (XT60)
• Turnigy nano-tech 1300mAh 4S 45-90C LiPo pack (XT60)
• Multistar High-Capacity 4S 5200mAh Multirotor LiPo Pack
• Turnigy nano-tech A-SPEC G2 1000mAh 3S 60~90C LiPo Battery
• Turnigy nano-tech 850mAh 3S 45-90C LiPo battery
• Turnigy nano-tech 1000mAh 3S 25~50C LiPo pack
• SKYRC IMAX B6AC V2 Professional Balance Charger/Discharger
• Turnigy 2650mAh 3S 1C LiPo Tx pack for Futaba and JR
• Turnigy 1000mAh 3S 25C LiPo battery
• Zippy Compact 1500mAh 3S 25C LiPo battery
• Transmitter LiPo battery 11.1V 2200mAh (Walkera, RadioLink, Futaba, FlySky)
• 1S 3.7V 100mAh battery for CX-10 or other micro drones
• iMax B3 LiPo 2S 3S Battery Charger
• Eachine H8 3.7V 260mAh 1S LiPo battery
• Eachine H8 mini 3.7V 150mAh 1S LiPo battery
• Turnigy Bolt 1300mAh 4S 15.2V 65-130C LiPo Battery
• Turnigy Bolt 850mAh 3S 11.1V 65~130C LiPo battery
• Turnigy Bolt 1000mAh 4S 15.2V 65-130C LiPo battery
• SkyRC e3 AC 2-3S battery charger (genuine)
• Turnigy 5000mAh 2S 7.4V 60C hardcase pack
• Turnigy Bolt 2200mAh 3S 11.4V 65-130C High-Voltage LiPo Pack (LiHV)
• Turnigy nano-tech 1500mAh LiFe 3S 9.9V Transmitter Pack (Taranis Compatible)
• Turnigy 9XR safety-protected 11.1V (3S) 2200mAh 1.5C transmitter pack
• Turnigy 3300mAh 3S 20C LiPo battery
• Zippy Compact 3300mAh 3S 35C LiPo Pack
• Turnigy nano-tech 1300mAh 4S 25-50C LiPo Battery
• Zippy Flightmax 2200mAh 4S 40C LiPo Battery
• Zippy Compact 1300mAh 4S 25C LiPo Pack
• Zippy Flightmax 2200mAh 4S 30C LiPo Pack
• Zippy Compact 1800mAh 3S 25C LiPo Battery Pack
• Zippy Compact 4000mAh 2S 25C LiPo Battery Pack
• Turnigy 2200mAh 2S 30C LiPo battery pack
• 3.7V 380 mAh LiPo battery for mini drone
• 1x nylon strap, 20cm, for LiPo battery
• Zippy Flightmax 2200mAh 2S 20C
• Zippy 4000mAh 2S1P 25C car LiPo (ROAR approved)
• Zippy 5200mAh 2S2P 30C hard-case LiPo pack (ROAR approved)
• Turnigy Graphene 2200mAh 3S 45C LiPo pack with XT60
• MultiStar Racer Series 1400mAh 3S 40-80C LiPo battery (XT30)
• Zippy Flightmax 1800mAh 2S 20C LiPo Battery
• Multistar High-Capacity 6S 10000mAh Multi-Rotor LiPo Pack
• MultiStar Battery Strap, 330mm
• Zippy Flightmax 2100mAh 3S 35C LiPo Battery
• Walkera Runner 250 Battery Strap 250-Z-27
• Turnigy nano-tech 1300mAh 3S 25-50C LiPo Battery
• Zippy Compact 2200mAh 3S 35C LiPo Pack (XT60)
• XT60 battery to EC3, TRX, Tamiya, and Dean (4 pieces)
• LiPo battery safety bag 225x183x3mm
• LiPo Battery safety bag 180 x 70 x 60 mm
• CellMeter 8 Digital Servo, ESC, Battery Tester
• TEAC 25W/3A Professional Balance Charger for 2S 3S LiPo/2S 3S LiFe/1-8S NiMH Batteries
• BX100 1-8S LiPo Battery Voltage Tester, Low-Voltage Buzzer Alarm with LED Indicator
• 18650 single battery holder with wire, 3.7V
• TP5100 2A 8.4V/4.2V 1S or 2S lithium 18650 charger DIY module
• Micro USB 5V 1A 18650 TP4056 lithium battery charger module board with battery protection
• USB-C 5V 1A 18650 TP4056 lithium battery charger module board with battery protection

62-

1300mAh Battery

• Turnigy nano-tech 1300mAh 3S 45-90C LiPo Battery Pack (XT60)
• Turnigy nano-tech 1300mAh 4S 45-90C LiPo pack (XT60)
• Turnigy Bolt 1300mAh 4S 15.2V 65-130C LiPo Battery
• Turnigy nano-tech 1300mAh 4S 25-50C LiPo Battery
• Zippy Compact 1300mAh 4S 25C LiPo Pack
• Turnigy nano-tech 1300mAh 3S 25-50C LiPo Battery

90-

2MM Bullet connector

• 10 pairs 2mm gold bullet connector battery ESC motor plug

97-

8 Inch properllers

• One pair CW, CCW replacement DJI Phantom 8045 props propellers 8x4.5
• 1 pair CW, CCW replacement DJI Phantom 8045 props propeller 8x4.5 (white)
• Pair of 8045 carbon fiber propellers for DJI Phantom
• Pair of 8045 self-locking propellers for DJI Phantom CW/CCW

129-

Diods

• 2 pcs 2W10 2A bridge rectifier diodes
• 10x 1N4007, 1A, 1000V diode
• 3A 1000V diode bridge rectifier KBP307
• 10A10 10A 1000V diode rectifier
• 10 pcs 1N4148 small signal diodes
• 10 pcs 1N4001 50V 1A SMD diodes
• 2 pcs MB6F 600V 0.5A SOP-4 SMD rectifier diode bridges
• 1N5406 3A 600V diode
• KBPC5010 50A single-phase bridge rectifier, 50 to 1000 volts
• IN5822 40V 3A Schottky diode
• 1N5817 20V 1A Schottky diode
• 10 pcs 1N5819 SS14 40V 1A Schottky rectifier diodes SMA DO-214AC SMD
• 10pcs 1N5822 SS24 DO-214AA SMB Schottky diode 2A 40V
• 10 pcs Robojax 2N2907 PNP transistor TO-92
• 10pcs 2N3904/MMBT3904 SOT-23 SMD NPN transistors
• KBU808 SIP-4 8A 800V bridge rectifier
• 1N5408 3A 1000V diode
• 10 pcs 1N914 small signal diodes
• 10pcs 2N3904 TO-92 NPN transistors
• D25XB60 25A 600V bridge rectifier
• KBPC3510 50A single-phase bridge rectifier, 35 to 1000 volts
• KBPC1010 10A single-phase bridge rectifier, 35 to 1000 volts
• TL431 2.5-36V programmable precision voltage reference TO-92

12-

Transmitters & Receivers

• FlySky FS-TH9X 2.4G 9CH Transmitter Set with Receiver
• FlySky FS-i6 2.4G 6CH transmitter with receiver
• Flysky FS-T6 6ch 2.4GHz transmitter, receiver
• FlySky FS-R9B 2.4GHz 8CH receiver
• Flysky FS-GR3E 3-channel 2.4G receiver
• OrangeRx R615X DSM2/DSMX compatible 6ch 2.4GHz receiver w/CPPM
• Turnigy 9X 9-channel transmitter with module and 8-channel receiver, Mode 2
• Radiolink 2.4G AT9 9ch transmitter with RD9 receiver
• FlySky 2.4GHz FS-CT6B 6CH quadcopter FPV transmitter with receiver
• FlySky FS-R6B 2.4GHz 6-Channel AFHDS Receiver
• Flysky FS-iA6 2.4G 6CH RC receiver
• Lemon RX DSM2 Compatible 6-Channel Receiver (feather-light)
• Turnigy Transmitter Glove (2.4 GHz/Neckstrap Ready)
• RadioLink R9D 2.4G 9CH DSSS receiver
• Walkera Devo 7 2.4GHz 7CH LCD transmitter with receiver
• OrangeRX DSMX/DSM2/Devo 2.4 GHz selectable transmitter module (JR/Turnigy compatible)
• Walkera DEVO10/DEVO 10 2.4G 10CH Radio Transmitter and Receiver
• Walkera Runner 250 receiver DEVO-RX710
• Walkera Runner 250 Quadcopter Receiver Antenna Fixing Mount 250-Z-29
• FrSky 2.4 GHz ACCST Taranis X9D Plus with receiver
• FrSky X8R 8/16Ch S.BUS ACCST telemetry receiver with Smart Port
• OrangeRX Silicone Protection Cover for Non-Satellite Receivers
• FrSky XSR 2.4 GHz 16CH ACCST receiver
• KS-SERVO 8ch FrSky ACCST compatible receiver
• V-Type Receiver Antenna Pedestal Fixing Mount
• Antenna range booster for DJI Phantom 3, 4, and Inspire 1, 2
• Signal Range Booster for DJI Phantom 3 Standard
• Turnigy 9X 2.4GHz 8Ch receiver (V2)

63-

1800mAh Lipo Battery

• Turnigy nano-tech A-SPEC G2 1800mAh 3S 65-130C LiPo Pack
• Zippy Compact 1800mAh 3S 25C LiPo Battery Pack
• Zippy Flightmax 1800mAh 2S 20C LiPo Battery

104-

Jumper wires

• 20cm female-to-female 10-pin Dupont cable
• 20cm female-to-male 10-pin Dupont cable
• 20cm male-to-male 10-pin Dupont cable
• 60 pcs flexible jumper wires, various sizes, 8-21 cm

134-

Electronic Kits

• C51 4-bit Digital Electronic Clock DIY for education
• PAM8403 5V 3W stereo audio amplifier module with volume control

188-

M2 Screw

• 6x M3 plastic spacer, standoff, nut, and screw
• 12 x M2 8mm black Phillips pan head screw
• Thermal silicone paste compound for heat sink
• 20g Thermal Grease GD100 Heat Sink Paste with Adhesive, White
• 1.0g Syringe Heatsink Compound for CPU thermal transfer purposes

9-

Power

• Power Module v1.0 for APM Pixhawk XT61 plug
• APM PX4 quadcopter T-plug power distribution board
• Multicopter power distribution board
• Power Module for APM Pixhawk, Deans T Plug
• Quadcopter Power Distribution RTF (XT60 plug)
• Power Distribution Board Mini for QAV250 CC3D with Standoff
• Power Distribution Board Mini for QAV250 CC3D
• Power distribution board (PDB) for Naze32 and CC3D
• HobbyWing 3A UBEC 5V or 6V voltage regulator for FPV drone
• UBEC-3A 12V mini UBEC for FPV gimbal telemetry devices
• Walkera Runner 250 Power Board, Runner 250-Z-23
• 12V from a 4S battery for FPV, TX, and camera with 3 JST outputs
• Matek PDB-XT60 power distribution board with BEC, 5V, 12V
• DC-to-DC 12-24V to 5V 3A Mini Step-Down Module
• HUB5V12V Matek Mini Power Hub Power Distribution Board PDB with BEC, 5V & 12V FPV
• Power Distribution Board (PDB) with BEC 5V & 12V FPV
• MP1584 - 1A DC/DC, Step-Down, Non-Isolated, Regulated Voltage Converter
• MP3608 2A DC-to-DC boost converter
• 1203B 3A PWM DC Motor Speed Controller
• 2pcs MP3608 2A DC-to-DC boost converter
• XL6009 Buck-Boost DC-DC Adjustable Step-Up/Step-Down Converter
• DC-DC 2V-5V to 5V boost step-up power voltage converter, 2A fixed output module
• DC 3.3V, 3.7V, 5V, 6V to 12V Step-Up Power Supply Boost, Vertical, for Arduino
• MP2307 Mini DC-DC 2A Step-Down Converter, Adjustable 4.75V-23V
• HW-637 LM2587 DC-DC 3V-35V To 4V-40V Step Up Power Module Boost Converter
• LM317 Adjustable Voltage DC-DC 1A Regulator Module, Input 4.2V-40V, Output 1.2V-37V

22-

Audio

• PAM8403 Super Mini Digital Amplifier Board, 2 x 3W Class D Digital, 2.5V to 5V Power Amplifier
• Robojax XPT8871 5W Mini Audio Power Amplifier Board 3-5V Module (single channel)
• Robojax PAM8610 2x10W power amplifier two-channel board

43-

Receivers

• FlySky FS-R9B 2.4GHz 8CH receiver
• Flysky FS-GR3E 3-channel 2.4G receiver
• OrangeRx R615X DSM2/DSMX compatible 6ch 2.4GHz receiver w/CPPM
• FlySky FS-R6B 2.4GHz 6-Channel AFHDS Receiver
• Flysky FS-iA6 2.4G 6CH RC receiver
• Lemon RX DSM2 Compatible 6-Channel Receiver (feather-light)
• RadioLink R9D 2.4G 9CH DSSS receiver
• Walkera Runner 250 receiver DEVO-RX710
• FrSky X8R 8/16Ch S.BUS ACCST telemetry receiver with Smart Port
• FrSky XSR 2.4 GHz 16CH ACCST receiver
• KS-SERVO 8ch FrSky ACCST compatible receiver
• Turnigy 9X 2.4GHz 8Ch receiver (V2)

116-

Other ESC

• Walkera Runner 250 CW ESC, Runner 250-Z-16
• Walkera Runner 250 CCW ESC, Runner 250-Z-17

139-

XT30 Connector

• Pair of XT30 power connectors (male, female)

163-

Converters

• 8-Channel Bidirectional Logic Level Converter Module, 3.3V, 5V
• AMS1117 5V to 3.3V converter module
• CD74HC4067 16-Channel Analog/Digital Multiplexer Breakout Board

5-

OSD and Telemetry

• OSD for APM ArduPilot Mega MinimOSD Rev. 1.1
• Radio Telemetry 915MHz kit for APM 2.6, 2.5, Pixhawk
• Micro MinimOSD with KV TEAM MOD for Naze32
• 3DR OSD telemetry cable V2, 200mm
• FrSky FLVSS LiPo Voltage Telemetry Sensor

91-

Transmiter Batteries

• Turnigy 2650mAh 3S 1C LiPo Tx pack for Futaba and JR
• Transmitter LiPo battery 11.1V 2200mAh (Walkera, RadioLink, Futaba, FlySky)
• Turnigy nano-tech 1500mAh LiFe 3S 9.9V Transmitter Pack (Taranis Compatible)
• Turnigy 9XR safety-protected 11.1V (3S) 2200mAh 1.5C transmitter pack

103-

Silicon Wire

• 1m 14 AWG silicon wire (1m black, 1m red)
• 1m Turnigy 16 AWG silicon wire (1m black, 1m red)
• 50cm 12 AWG silicon pair, red and black wire
• 1m 18 AWG silicon wire (1m black, 1m red)
• 1m 20 AWG silicon wire (1m red, 1m black)
• 1m 12 AWG silicon pair, red and black wire

131-

Compatible with Arduino® Modules

• IR Infrared Obstacle Avoidance Sensor Module for Arduino
• GY-NEO6MV2 NEO-6M GPS module for Arduino
• KY-008 650nm 5mW laser transmitter
• Infrared IR Wireless Remote Control + Infrared Receiver Module + Infrared Transmitter Kit for Arduino
• 650nm, 6mm, 5V, 5mW laser dot diode module head, red
• SPI to Ethernet Hardware TCP/IP W5500 Ethernet network module
• 650nm 6mm 5V 5mW laser dot diode module head red (silver)

137-

Capacitors

• 1000 µF 25V radial electrolytic capacitor, 10 x 17 mm
• 2 pcs MJL06-1 1-40 pF variable capacitor
• 2 pcs MJL4281 1-10 pF variable capacitor
• 2 pcs MJL4281 1-20pF variable capacitor
• 2 pcs MJL4281 1-60pF variable capacitor

146-

Multirotor Kits

• Mini 250 Racer quadcopter frame, motors, GPS, FPV camera, ESC, CC3D, propellers, battery
• 450mm quadcopter kit, CC3D, motor, ESC, props, and power

147-

Yuneec Propellers

• Set of four propellers for YUNEEC Typhoon G Q500, Q500M, Q5004K

165-

Relay Modules

• 5V 2-Channel Relay Module Shield for Arduino, ARM, PIC, AVR, DSP
• W1209 Temperature Controller with display relay
• 0-10 second NE555 Timer Adjustable 12V Delay Module

172-

PCB Connectors

• KF301-2P 2-Pin Plug-in PCB Terminal Block, 5.08 mm Connector

173-

Inductors

• Toroidal Core 100µH inductors Wire 6A

3-

Propellers

• 1 pair 1045 CW CCW propeller 10x4.5 orange
• 9-inch CW/CCW Propeller Prop for DJI Phantom 1, 2, 3
• 9-inch carbon fiber propeller DJI Phantom 2 Vision+
• Two pairs of 9-inch 9443 carbon fiber self-tightening propellers for DJI Phantom 2 Vision+
• Two pairs of 9-inch 9443 self-tightening CW/CCW propellers for DJI Phantom 1, 2, 3
• One pair 5030 EP direct drive 5x3 propellers, black
• Ghost 6030 Black Propellers, Set of 4 (CW/CCW)
• Ghost 6030 Red Propellers for Night Flying LED Illumination
• Ghost 6030 Orange Propellers for Night Flying LED Illumination
• Ghost 6030 Blue Propellers for Night Flying LED Illumination
• 1 pair 1045 CW CCW propellers 10x4.5 red
• 1 pair 1045 CW CCW propeller 10x4.5 black
• 1 pair 1045 CW CCW propeller 10x4.5 yellow
• 1 pair 5030 EP direct drive 5x3 propellers, green
• One pair 5030 EP direct drive 5x3 propellers, orange
• One pair CW, CCW replacement DJI Phantom 8045 props propellers 8x4.5
• 1 pair CW, CCW replacement DJI Phantom 8045 props propeller 8x4.5 (white)
• Pair of Walkera Runner 250 Z-01 propellers (CW and CCW)
• Walkera Runner 250 (R) Advanced CW/CCW Propellers Runner 250(R)-Z-01
• Pair of 8045 carbon fiber propellers for DJI Phantom
• Pair of 8045 self-locking propellers for DJI Phantom CW/CCW
• A pair of 6045 propeller 6x4.5 props, CW/CCW, black
• A pair of 6045 propeller 6x4.5 props, CW/CCW, green
• A pair of 6045 propeller 6x4.5 props, CW/CCW, orange
• Pair Diatone 4025 propeller CW and CCW (black)
• Pair Diatone 4025 propeller CW and CCW (green)
• Pair Diatone 4025 propeller CW and CCW (orange)
• 1 Pair Original Walkera QR X350 PRO-Z-01 Propeller (white)
• 1 pair 4045 3-blade props CW, CCW (black)
• 1 Pair 4045 3-Blade Props CW, CCW (red)
• 1 pair 4045 3-blade props CW, CCW (green)
• 1 pair 5045 3-blade props CW, CCW (black)
• 1 pair 5045 3-blade props CW, CCW (red)
• One pair 5045 3-blade props CW, CCW (green)
• Set of four propellers for YUNEEC Typhoon G Q500, Q500M, Q5004K
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) blue
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) red
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) black
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW), white
• One pair Syma X8 X8C X8W X8G propellers (CW and CCW) orange

65-

2000-2900mAH Lipo Battery

• Turnigy 2200mAh 3S 20C LiPo battery (XT60 plug)
• Turnigy 2200mAh 3S 30C LiPo battery pack (XT60)
• Zippy Compact 2200mAh 3S 25C LiPo Pack (XT60)
• Turnigy Bolt 2200mAh 3S 11.4V 65-130C High-Voltage LiPo Pack (LiHV)
• Zippy Flightmax 2200mAh 4S 40C LiPo Battery
• Zippy Flightmax 2200mAh 4S 30C LiPo Pack
• Turnigy 2200mAh 2S 30C LiPo battery pack
• Zippy Flightmax 2200mAh 2S 20C
• Turnigy Graphene 2200mAh 3S 45C LiPo pack with XT60
• Zippy Flightmax 2100mAh 3S 35C LiPo Battery
• Zippy Compact 2200mAh 3S 35C LiPo Pack (XT60)

111-

SMA and RP-SMA Connectors

• Adapter RP-SMA male jack to SMA female connector
• SMA jack to RP-SMA plug right-angle adapter connector
• RP-SMA jack to SMA plug FPV connector
• RP-SMA jack to SMA plug right-angle FPV connector
• SMA Female to u.FL/IPX/IPEX RF Coax Adapter Assembly RG178 Pigtail 8" (20cm)
• RP-SMA Female to uFL/u.FL/IPX/IPEX RF Coaxial Adapter Assembly RG178 Pigtail 8" (20cm)

127-

IC

• 10pcs IC NE555 timer DIP-8 from Robojax on Amazon
• LM741 Op-Amp operational amplifier DIP-8
• 10pcs NE555 timer SMD IC SOP-8 from Robojax on Amazon
• LM386N-1 low-voltage audio power amplifier
• 78M12 12V DC precision 500 mA regulator TO-252 (DPAK)
• 78M09 9V DC precision 500 mA regulators, TO-252 (DPAK)
• X9C104P SOP-8 100k ohm digitally controlled potentiometer (XDCP)
• Pair of TIP41C NPN and TIP42C PNP complementary power transistors, 6A, 100V
• X9C104P DIP-8 100k ohm digitally controlled potentiometer (XDCP)
• L293D Quadruple Half-H Driver DC Motor Controller
• TL082 Wide-Bandwidth Dual JFET Input Operational Amplifier
• CD4017 decade counter IC, DIP-16
• LM324N Low-Power Quad Operational Amplifier DIP-14
• LM35 3-pin temperature sensor
• LM336-2.5 Programmable Shunt Regulator, Low Temperature Coefficient 2.5V Reference
• LM393 low-power, low-offset voltage dual comparator op-amp
• LM358 dual standard operational amplifier op-amp
• 20pcs NE555 timer DIP8 IC from Robojax on Amazon
• 10pcs NE555 timer DIP-8 from Robojax on Amazon

140-

1400mAh Batteries

• MultiStar Racer Series 1400mAh 3S 40-80C LiPo battery (XT30)

142-

Circuit Module

• DC-DC boost converter, 1-5V to 5V, 500mA
• 2000W AC Motor Speed Control, 50-220V, BTA16-600B Triac

153-

Sensors

• DHT11 temperature and relative humidity sensor module, Arduino
• Hall sensor, Hall switch, speed counting module, position sensing module
• Ultrasonic HC-SR04 transducer sensor for Arduino
• BMP180 Digital Barometric Pressure Sensor Module for Arduino
• HC-SR501 Infrared PIR Motion Sensor Module, Arduino, Raspberry Pi
• Light Intensity Sensor Module for Arduino
• SW-420 Vibration Sensor Module for Arduino
• Soil Humidity Detector Module for Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• BME280 atmospheric pressure sensor module
• APDS-9960 RGB Gesture Sensor I2C module for Arduino (6-pin)
• Standard Linear Hall Effect Magnetic Sensor Module for Arduino
• MQ-2 gas sensor module for Arduino
• TTP223 Capacitive Touch Switch Button Module for Arduino
• HC-SR505 PIR Motion Infrared Sensor Module
• Reed sensor module, magnetron module for Arduino
• 30A Range Current Sensor Module ACS712 Module for Arduino
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino
• GP2Y0A21YK0F Sharp IR analog distance sensor, distance 10-80 cm cable for Arduino
• Laser Sensor Module, non-modulator tube, laser receiver
• APDS-9960 RGB gesture and sensor module I2C breakout for Arduino (6-pin)
• Ultrasonic HC-SR04 module sensor distance measuring board with mount
• E18-D80NK Infrared Obstacle Avoidance Proximity Sensor
• Slot-type IR optocoupler speed sensor
• ACS712 Hall-Effect 30A Current Sensor for Arduino
• VL53L0X Time-of-Flight Distance Sensor Breakout GY-VL53L0XV2V Module, Arduino
• BMP280 3.3V Digital Module, Replacement for BMP180 and BMP085 Temperature and Barometric Pressure Sensor Modules
• AM2320 Digital Temperature and Humidity Sensor. Original authentic. Can replace SHT20, SHT10.
• DHT11 temperature and relative humidity sensor module, Arduino (bare sensor)
• AM2301 Digital Temperature and Humidity Sensor Module
• Rain and snow detector module for Arduino
• High-precision AM2302 DHT22 digital temperature and humidity sensor module for Arduino
• MPU9250 SPI/I2C 9-Axis Attitude Module: Gyro, Accelerometer, and Magnetometer
• GY-273 HMC5883L 3V-5V triple-axis compass magnetometer sensor module for Arduino
• Voltage Sensor for Arduino
• BH1750FVI Digital Light Intensity Sensor Module for Arduino
• K type surface thermocouple temperature sensor 1m prob from -50 to 204°C
• ASAIRE AM2320B digital temperature and humidity sensor
• TEMT6000 Ambient Light Sensor for Arduino
• Infrared Remote Control Module with Receiving Head HX1838, NEC Coding
• NTC Thermistor Temperature Sensor, Waterproof Probe, Wire, 10K, 1%, 3950, W1209, W1401 cable
• Allegro ACS758 Current Sensor, 50A to 200A
• Flame Sensor Module for Arduino
• BH1750FVI digital 16-bit ambient light sensor I2C for Arduino
• Allegro CJMCU-758 ACS758LCB-100B-PFF-T Linear Current Sensor Module
• GY-530 VL53L0X IIC I2C ToF time-of-flight ranging distance sensor, 4+2 pins (blue)
• MCP9808 I2C High Accuracy Digital Temperature Sensor -40°C to +125°C
• High-precision AM2302 DHT22 digital temperature and humidity sensor module for Arduino, black PCB
• TCRT5000 IR Intelligent Vehicle Tracking Sensor Module
• NTC Thermistor Temperature Sensor, Waterproof Probe with Wire, 10K, 1%, 3950, W1209, W1401, 1m cable
• Maxim Integrated DS18B20 programmable 1-Wire digital thermometer, 3-pin TO-92
• HTU21D temperature and humidity sensor module
• Micro PIR Motion Detection Sensor AM312 for Arduino, Raspberry Pi
• TTP223B Capacitive Touch Switch Button Module for Arduino
• BME280 Digital Relative Barometric Pressure and Humidity Sensor Module for Arduino
• Waterproof 18B20 temperature probe, temperature sensor, stainless steel package
• MCP4725 digital-to-analog converter DAC I2C module for Arduino and Raspberry Pi
• ACS712 Hall-Effect 20A Current Sensor for Arduino
• ACS712 Hall-Effect 5A Current Sensor for Arduino
• CJMCU-531 VL53L1X ToF time-of-flight 400cm ranging distance sensor - 6-pin
• BME280 atmospheric pressure sensor module, 3.3V
• MPR121 12-channel proximity capacitive touch sensor controller with I2C for Arduino and Raspberry Pi
• Allegro ACS770 ACS770LCB-50U-PFF-T current sensor, 50A to 200A
• Allegro ACS770LCB-500B Linear Current Sensor for Arduino
• ADS1115 16-bit 860SPS 4-channel delta-sigma ADC with PGA and I2C for Arduino
• MCP4725 Breakout Board - 12-Bit DAC with I2C Interface for Arduino
• QMC5883L triple-axis magnetometer compass board module with I2C for Arduino
• DS18B20 100cm Waterproof Temperature Sensor with PCB adapter
• VL6180 proximity sensing module, 0-620 mm, 5V laser distance sensor

176-

Audio Amplifiers

• PAM8403 Super Mini Digital Amplifier Board, 2 x 3W Class D Digital, 2.5V to 5V Power Amplifier
• Robojax XPT8871 5W Mini Audio Power Amplifier Board 3-5V Module (single channel)
• Robojax PAM8610 2x10W power amplifier two-channel board

2-

ESC

• RoboJax 30A Brushless Electronic Speed Controller ESC
• 12A Emax ESC BlHeli firmware
• 30A Brushless ESC SimonK firmware
• HJ Servo and ESC Consistency Tester
• 4x 30A Brushless ESC SimonK firmware (bullet connector)
• Afro ESC 12Amp Ultra Lite ESC (SimonK Firmware) V3
• Turnigy Plush 30A Speed Controller (ESC)
• Afro ESC 30 Amp Opto Multi-rotor Motor Speed Controller (SimonK Firmware)
• 4-in-1 ESC Favourite SKYIII Quattro 12A Brushless Quadcopter BEC BLHeli
• DYS ESC USB Linker ESC programmer
• DYS 16Amp Micro Opto BLHeli Multi-Rotor ESC (BLHeli Firmware)
• Afro ESC 30 Amp Multi-rotor Motor Speed Controller (SimonK Firmware)
• 4x Emax SimonK 12A Brushless ESC Speed Controllers
• 12A SimonK firmware brushless ESC with BEC
• 12A Brushless ESC SimonK firmware
• DYS 20A ESC BLHeli/SimonK firmware (Tiny)
• Favorite Littlebee 20A 2-4S ESC (No BEC)
• EMax 20A BLHeli ESC with 2A/5V BEC
• Walkera Runner 250 CW ESC, Runner 250-Z-16
• Walkera Runner 250 CCW ESC, Runner 250-Z-17
• 3ch ESC Servo Tester RJX-385
• 12A Emax ESC Simonk firmware

82-

3000mAH Lipo Battery

• Turnigy nano-tech 3000mAh 3S 25~50C LiPo pack

108-

Heat Shrink

• 60 cm (2 feet) 5 mm heat shrink tubing, red and black
• 60 cm of 2 mm heat-shrink tubing, red and black

135-

Breadboard and PCB

• Double-sided prototype PCB, 5cm x 7cm board
• Solderless MB-102 breadboard 830
• 5x DIY prototype PCB universal matrix circuit board, 5x7 cm
• D303 SYB-170 mini solderless prototype breadboard
• 400-Point Solderless Breadboard

138-

JST XH Charge Cable

• 3S JST-XH female, male LiPo battery cable for RC
• JST-XH 4S connector adapter plug with 12cm wire for 4-cell
• JST-XH 2S balance wire extension adapter, 20cm cable
• JST-XH 3S balance wire extension adapter, 30cm cable
• 4pcs Micro JST 1.0mm SH 2-Pin Connector Plug With 100mm wire

143-

6000-10000mAh LiPo Batteries

• Multistar High-Capacity 6S 10000mAh Multi-Rotor LiPo Pack

7-

GPS

• NEO-6M GPS with Compass for APM 2.6/APM 2.8, white
• Mini Ublox 7 NZ GPS for Naze32/Flip32 6DoF/10DoF
• Mini Ublox 7 OpenPilot OP GPS CC3D
• GPS folding mount
• Ublox NEO-6M GPS module
• Ublox NEO-M8N GPS module with compass + GPS bracket for APM 2.8

71-

Camera Gimbal Accessories

• FY Handheld Telescopic Stick for GoPro

83-

4000mAH Lipo Battery

• Multistar High-Capacity 3S 4000mAh LiPo Battery 10-20C (XT60 plug)
• Zippy Compact 4000mAh 2S 25C LiPo Battery Pack
• Zippy 4000mAh 2S1P 25C car LiPo (ROAR approved)

119-

5000mAH Lipo Battery

• Turnigy 5000mAh 2S 7.4V 60C hardcase pack

128-

IC Sockets

• 2 pieces 8-pin IC socket, solder type
• Two 16-pin IC socket adapters, solder type
• 2 pcs 24-pin DIL IC socket, Arduino IC socket

132-

4 inch Props

• Pair Diatone 4025 propeller CW and CCW (black)
• Pair Diatone 4025 propeller CW and CCW (green)
• Pair Diatone 4025 propeller CW and CCW (orange)

141-

Battery Accessories

• Lipo Battery Low Voltage Alarm 1S-8S Buzzer
• 1x nylon strap, 20cm, for LiPo battery
• MultiStar Battery Strap, 330mm
• Walkera Runner 250 Battery Strap 250-Z-27
• XT60 battery to EC3, TRX, Tamiya, and Dean (4 pieces)
• CellMeter 8 Digital Servo, ESC, Battery Tester
• BX100 1-8S LiPo Battery Voltage Tester, Low-Voltage Buzzer Alarm with LED Indicator

164-

Potentiometer Variable Resistor

• 10k ohm WH148 potentiometer, 15mm shaft
• 100k ohm WH148 potentiometer, 15mm shaft
• 500k ohm WH148 potentiometer, 15mm shaft
• 500-ohm potentiometer trimmer
• 20k ohm potentiometer trimmer
• 1M Ohm potentiometer trimmer
• 50k Ohm Vertical Potentiometer Trimmer
• 200k Ohm Vertical Potentiometer Trimmer
• 2k Ohm Vertical Potentiometer Trimmer
• 100k Ohm Vertical Potentiometer Trimmer
• 10k Ohm Vertical Potentiometer Trimmer
• 100 Ohm Vertical Potentiometer Trimmer
• 500k Ohm Vertical Potentiometer Trimmer
• 200 Ohm Vertical Potentiometer Trimmer
• 1k Ohm Vertical Potentiometer Trimmer
• 5k Ohm Vertical Potentiometer Trimmer
• 10k ohm vertical potentiometer, side-adjust trimmer
• 1k Ohm Vertical Potentiometer, side-adjust trimmer
• 5k Ohm Vertical Potentiometer, side-adjust trimmer
• 100 Ohm Vertical Potentiometer, trimmer, side-adjust
• 50k Ohm Vertical Potentiometer, trimmer, side-adjust
• 100k ohm vertical potentiometer, side-adjust trimmer
• 1M Ohm Vertical Potentiometer, side-adjust trimmer
• 200k ohm vertical potentiometer, side-adjust trimmer
• 500 Ohm Vertical Potentiometer, side-adjust trimmer
• 500k ohm vertical potentiometer, side-adjust trimmer
• 20k Ohm Vertical Potentiometer, side-adjust trimmer
• 200 Ohm Vertical Potentiometer, side-trimmer
• 2k Ohm Vertical Potentiometer, trimmer, side-adjust
• 3296 Multi-turn Potentiometer, 1k ohm
• 3296 Multi-turn Potentiometer, 20k ohm
• 3296 Multi-turn Potentiometer, 100k ohm
• 3296 Multi-turn Potentiometer, 5k ohm
• 3296 Multi-turn Potentiometer, 2k ohm
• 3296 Multi-turn Potentiometer, 10k ohm
• 3296 Multi-turn Potentiometer, 50k ohm
• 3296 Multi-turn Potentiometer, 500k ohm
• 3296 Multi-turn Potentiometer, 200k ohm
• 3296 Multiturn Potentiometer, 100 ohm
• 3296 Multi-turn Potentiometer, 200 ohm
• 3296 Multi-turn Potentiometer, 500 ohm

166-

Servo motors

• SG90 mini servo motor
• MG996R metal-gear digital servo

1-

Motors

• A2212 1000kV brushless motor
• 4 x 2212 920 kV for DJI brushless motors
• 4 x 1000 kV motors, 30A ESC, and prop kit
• 3.0mm/3.17mm RC Aluminum Bullet Propeller Adapter for Brushless Motor
• Two Multistar Elite 2204-2300KV multi-rotor motors (CW and CCW)
• DYS 1804-23 2000KV BX Series set of 2 motors CW/CCW
• 4x Emax MT2204 2300KV brushless motors
• 2CW/2CCW ZMR Brushless Motor 1804 2400kV
• 2212 920KV Brushless Motor (CW/CCW) for DJI Phantom F330, F450, F550
• Fixed adapter nut cap for DJI Phantom motor 2212 920KV
• Propeller Adapter Nut Cap Set for DJI Phantom Motor 2212 920KV (CW and CCW)
• Emax MT2204 2300KV brushless CW (original in box)
• Emax MT2204 2300KV brushless CCW (original in box)
• 4x Emax MT2204-II 2300KV Air-Cooling Brushless Motor
• One pair propeller nut cap adapter CW CCW for Emax 1806
• 1 Pair Propeller Nut Cap Adapter CW CCW for Emax 2204
• Micro motor with metal gearbox, DC 6V, 30 RPM N20 for Arduino smart car

10-

Cables and Connectors

• Four pairs Dean connector T-plugs
• 10 Pairs 3.5mm Bullet Banana Connectors
• XT60 harness for two packs in parallel (16 AWG)
• T-Connector, Female to HXT 3.5mm Male Adapter
• XT60 to 4 x 3.5mm bullet ESC quadcopter power distribution
• HXT 3.5mm charging lead with 4mm banana plugs
• XT60 to 3.5mm bullet breakout cable for hexacopter
• XT60 harness for two packs in parallel, 12 AWG wire
• 5 pairs (10 pcs) of JST connectors on 15 cm wires
• Micro USB to AV-out FPV camera cable for SJ4000
• 4x RC 150mm Servo Extension Cord Cable
• 3S JST-XH female, male LiPo battery cable for RC
• Pair of XT30 power connectors (male, female)
• XT60 male plug to T female plug adapter
• XT60 male to EC3 female 10cm 14AWG cable
• 2 pairs (4 pieces) XT60 connectors, male/female
• Four 10 cm servo receiver cables for quadcopter
• XT60 harness for two packs in parallel
• T-connector harness for two packs in parallel
• JST male to JR female 10 cm cable
• JST-XH 4S connector adapter plug with 12cm wire for 4-cell
• 10 pairs 2mm gold bullet connector battery ESC motor plug
• JR Servo Cable Y-split 15cm extension cable
• JR Servo Cable Y-split 30cm extension cable
• Pair of 4 mm banana connectors
• XT60 female with 12AWG silicon wire, 10cm
• XT90 to banana plug charge lead adapter
• XT60 male connector with 30cm 16AWG silicon wire
• 1m 14 AWG silicon wire (1m black, 1m red)
• 1m Turnigy 16 AWG silicon wire (1m black, 1m red)
• 50cm 12 AWG silicon pair, red and black wire
• 1m 18 AWG silicon wire (1m black, 1m red)
• 20cm female-to-female 10-pin Dupont cable
• 20cm female-to-male 10-pin Dupont cable
• 20cm male-to-male 10-pin Dupont cable
• 4 x 15 cm servo receiver cables, male to male
• 4x RC 100mm Servo Extension Cable
• XT60 with 4mm banana charge cable, 30cm
• Nylon XT90 female connector
• Nylon XT90 connectors, male
• 1m 20 AWG silicon wire (1m red, 1m black)
• JST-XH 2S balance wire extension adapter, 20cm cable
• JST-XH 3S balance wire extension adapter, 30cm cable
• XT60 Panel Mounting Kit
• XT60 male with 12 AWG silicon wire, 10 cm
• 2 pairs 2-pin mini JST 1.25mm with 10cm wire (male/female)
• 1m 12 AWG silicon pair, red and black wire
• Dean T male to XT60 connector
• 20 cm micro USB cable
• 60 pcs flexible jumper wires, various sizes, 8-21 cm
• JST-DS LOSI 2-pin cable with male and female connectors, 15cm
• U-shape connector, 10 pairs (20 pieces)
• 5 pairs insulated 4.3mm fork connector electrical terminals (5 red and 5 blue)
• 5 pairs (10 pcs) of JST connectors on 10 cm wires
• 4x RC 300mm Servo Extension Cord Cable, JR Male to Female
• XT60 male with 14 AWG silicon wire, 10 cm
• XT60 female with 14 AWG silicon wire, 10cm
• KF301-2P 2-Pin Plug-in PCB Terminal Block, 5.08 mm Connector
• XT60 male to EC2 female 10cm 14AWG cable
• Male XT60 to female XT30 plug adapter converter
• Female XT60 to Male XT30 Plug Adapter Converter
• XT30 Connector to 4.0mm Banana Plug, 16 AWG, 30cm Charge Cable
• Male TRX to Female XT60 Connector Adapter
• XT60 male mounting connector bracket
• 4pcs Micro JST 1.0mm SH 2-Pin Connector Plug With 100mm wire
• JST-DS LOSI 2-pin cable with male connector, 15cm, and female connector, 15cm (2 pcs)
• XT60H Upgraded XT60 Sheath Housing Connector Plug, Lithium Battery Discharge Terminal for RC LiPo Battery

70-

FPVAntenna

• 5.8 GHz Circularly Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV
• FPV 5.8 GHz antennas TX/RX straight RP-SMA
• Circular Polarized Mushroom Antenna SMA Set, Tx/Rx for FPV
• Walkera Runner 250 - 5.8GHz Mushroom Antenna (SMA)
• Clover-Leaf Mushroom Circularly Polarized Antenna TX, 5.8 GHz (RP-SMA)
• FPV Cloverleaf 5.8 GHz TX and RX L-shaped circularly polarized antenna
• 5.8 GHz circularly polarized mushroom L-shape antenna RP-SMA
• 5.8 GHz Circularly Polarized Mushroom FPV Antenna, Straight RP-SMA
• FPV 5.8GHz Clover 3-blade TX with 4-blade RX RP-SMA Straight Antenna
• Aomway 5.8GHz 4-Leaf Clover Antenna Set for TX/RX (RP-SMA)
• Aomway 5.8GHz 4-Leaf Clover FPV Antenna Set for TX/RX (RP-SMA)
• Eachine 5.8 GHz/2.4 GHz Tx/Rx RHCP FPV mushroom antenna (RP-SMA)

84-

5200mAH Lipo Battery

• Multistar 3S 5200mAh LiPo battery 10-20C pack (XT60 plug)
• Multistar 3S 5200mAh LiPo battery 10-20C for QR-350 Pro
• Multistar High-Capacity 4S 5200mAh Multirotor LiPo Pack
• Zippy 5200mAh 2S2P 30C hard-case LiPo pack (ROAR approved)

154-

Relay modules

• 5V low-trigger relay module for Arduino
• DC 5V 1-Channel Low-Level Trigger Solid-State Relay SSR
• DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor M6 for Arduino
• Omron G3MB-202P 2A solid-state relay for Arduino
• 2pcs IRFZ44N 55V 49A N-channel power MOSFET
• IRF840 N-channel 8A 500V TO-220 power MOSFET transistor
• 5V low-trigger relay module for Arduino
• DC 5V 2-Channel Low-Level Trigger Solid-State Relay SSR
• Omron G5V-2-DC12 two-pole 12V DC relay
• DC 5V Relay SRD-5VDC-SL-C 5-pin 10A 125VAC 30VDC 28VDC
• 5V Relay Module with HC-SR501 Infrared PIR Motion Sensor Module, Arduino, Raspberry Pi
• 5V Relay Module with TTP223 Touch Sensor Module, Arduino, Raspberry Pi
• Omron G5V-1-DC12 two-pole 12V DC relay
• Omron G5V-2-DC5 two-pole 5V DC relay
• 3.3V low-trigger relay module for Arduino
• Joystick and four-key keypad module and shield for Arduino
• DC 12V Relay SRD-12VDC-SL-C 5-pin 10A at 125V, 30V, 28V

13-

Accessories

• Glass fiber GoPro camera Velcro fastener strap, blue
• 2x Nylon Strap for Battery or Camera, Green
• 2x Nylon Strap for Battery or Camera, Blue
• 2x Nylon Strap for Battery or Camera, Red
• 2x Nylon Strap for Battery or Camera, Black
• Mini GSM GPRS drone tracker
• 4x Diatone 4-color LED decoration light board strip PCB
• USB to RS-232 Serial Port 9-Pin DB9 Cable Serial COM Port Adapter Converter

124-

XT90 Connector

• XT90 to banana plug charge lead adapter
• Nylon XT90 female connector
• Nylon XT90 connectors, male
• XT60 male mounting connector bracket

136-

LCD screens and Display

• LCD1602 LCD monitor, 16x2 character, 5V blue screen
• IIC/I2C Serial Interface Module for 1602 LCD Display
• 4-Digit LED 7-segment Display MAX7219 Module
• MAX7219 dot-matrix module Arduino 8x8 display
• 1602 LCD board keypad shield, yellow backlight for Arduino
• MAX7219 8-digit 7-segment display for Arduino
• 16-pin 8x8 common anode 3mm LED display
• LCD2004 LCD monitor, 20x4 character, 5V blue screen with I2C module
• 16-pin 8x8 mini common anode 20mm x 20mm 1.9mm LED display
• OLED 128x64 0.96-inch SSD1306 I2C display for Arduino
• OLED 128x32 0.91-inch SSD1306 I2C display for Arduino
• 74HC595 driving a 2-digit seven-segment display for Arduino
• MAX7219 8x8 matrix LED display for Arduino and Raspberry Pi (large chip)
• LCD1602-I2C LCD monitor, 16x2 character, 5V blue screen

144-

ESC Tools

• HJ Servo and ESC Consistency Tester
• DYS ESC USB Linker ESC programmer
• 3ch ESC Servo Tester RJX-385

159-

Connector, Jack and plug

• 2-pcs 40-pin 1x40 single-row male 2.54 breakable pin header connector
• 9V battery cable for Arduino
• 2 pcs 40-pin 2.54 mm female header
• 2 pcs 40-pin 2.54 mm right-angle male pin header connector
• DC 5.5 x 2.1mm power jack socket, PCB mount
• 2 pcs mini USB SMD 5-pin connector
• 9V battery snap connector with a 15cm cable
• Two pairs DC 5.5x2.1mm power jack, male and female
• 2-pc 9V battery cable for Arduino
• Female SMA jack PCB mount straight RF connector
• Male RP-SMA jack PCB mount straight RF connector

88-

Frame Accessories

• Landing gears for quadcopter, hexacopter

145-

3-Blade Props

• 1 pair 4045 3-blade props CW, CCW (black)
• 1 Pair 4045 3-Blade Props CW, CCW (red)
• 1 pair 4045 3-blade props CW, CCW (green)
• 1 pair 5045 3-blade props CW, CCW (black)
• 1 pair 5045 3-blade props CW, CCW (red)
• One pair 5045 3-blade props CW, CCW (green)

155-

Radio Frequency, Blue Tooth, WiFi

• 2-pc Arduino 2.4 GHz Transceiver Module NRF24L01
• HM-11 Bluetooth 4.0 BLE CC2540
• HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• ESP-01 ESP8266 Wi-Fi module for Arduino
• 433 MHz Transmitter and Receiver module for Arduino
• 8-pin adapter module NRF24L01 wireless transceiver
• AT24C256 DIP-8 EEPROM data storage module, 256kb with serial I2C interface
• D1 PRO Mini NodeMCU 4MB Lua Wi-Fi Internet of Things development board based on ESP8266 WeMos
• D1 Mini Pro NodeMCU, a 6MB Lua-based WiFi Internet of Things development board based on the ESP8266 WeMos.
• 433MHz LoRa SX1278 long-range RF wireless module DRF1278F for Arduino and Raspberry Pi
• AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 2pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 4pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 2pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 4pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 2pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 4pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541

161-

GPIO Cable and Breakout

• GPIO 20cm 40-pin Raspberry Pi cable
• GPIO expansion board for Raspberry Pi

113-

Frame parts

• F-450 F-550 Frame Replacement Arm
• Original Walkera Runner 250 Advanced Battery Fixed Plate Runner 250(R)-Z-04
• Walkera Runner 250 Battery Fixed Plate 250-Z-06
• Walkera Runner 250-Z-03 bottom main board

130-

Resistors

• 10 pieces 1k ohm 0.25W 5% carbon film resistors
• DIP exclusion 9-pin 1k ohm resistor array
• DIP exclusion 9-pin 220-ohm network resistor array
• DIP exclusion 9-pin 330-ohm network resistor array

170-

DC Motor Controller

• 1203B 3A PWM DC Motor Speed Controller
• 1.5A 2 Way Dual H-Bridge DC and Stepper MX1508 Motor Driver Module for Arduino Better Than L298N

171-

Robotic Hardware

• Manipulator mechanical arm paw gripper clamp kit for robot MG995 kit RJX-ARM55

112-

Flight Controller Accessories

• Flight Controller Anti-vibration Shock Absorber
• Shock absorber kit for CC3D, Naze32, mini APM flight controllers
• CC3D Flight Controller 8-pin Connection Cable Set (3 cables)

122-

3300mAh Batteries

• Turnigy 3300mAh 3S 20C LiPo battery
• Zippy Compact 3300mAh 3S 35C LiPo Pack

125-

Transistors

• 10 pieces 2N2222 NPN transistors and 10 pieces 2N2907 PNP transistors
• 10 pieces 2N2907 PNP transistor TO-92
• 10 pcs BC547 TO-92 30V low-power NPN transistor
• TIP120 TO-220 Darlington NPN transistors
• TIP125 TO-220 Darlington transistors PNP
• 2N2007 MOSFET N-Channel TO-92 Transistor
• 5 pcs BC548 TO-92 NPN general purpose amplifier
• 5 pcs BC558 TO-92 PNP epitaxial silicon transistors
• IRFP150N, IRFP150NPBF 42A/100V TO-247 MOSFET
• TIP120 and TIP125 TO-220 Darlington transistors, NPN and PNP
• PC817B optocoupler phototransistor, DIP-4
• BT137-600 Triac 8A
• BT136-600 Triac 4A
• 2pcs 4N35 FSC optocouplers, phototransistor, 30V DIP6 IC
• 10PCS BC817-40 NPN transistor, 500mA, 45V, SOT23, NXP
• 10 pcs 2N3906 SMD PNP transistor SOT-23
• 10 pieces 2N2222 NPN transistors
• BS170 Single N-Channel Small Signal MOSFET 60V 500mA 5 TO-92 (TO-226)
• IRF510 N-channel 5.6A 100V TO-220 power MOSFET
• IRF540N, IRF540, TO-220, N-Channel, 33A, 100V Power MOSFET
• 600:600-ohm audio transformers, 1:1 EI14 isolation transformer, double-wire winding
• IRF520N, IRF520, TO-220, N-channel, 9.2, 100V, power MOSFET
• 8-pin DIP-8 round IC socket
• Rotary Encoder Module for Arduino or Raspberry Pi
• 2N3906 General Purpose PNP Transistor TO-92
• 2N7000 MOSFET, N-channel, 60V, 0.2A, TO-92
• Insulation Bushing Washer for TO-220 transistor
• 2P4M NEC TO-202 2A 400V SCR Thyristor
• 10 pcs BC327-25 PNP TO-92 500mA 45V transistors
• IRFZ44N, IRFZ44 N-channel power MOSFET
• IRF9540 P-channel power MOSFET, 23A, 100V, TO-220
• 10 pieces 2N5551 high-voltage NPN transistor 160V (CE)
• BT16-600B Triac, 600V, 16A
• IRFP260N HEXFET power MOSFET, 200V, 50A, TO-247
• Rotary Encoder Module EC11 for Arduino or Raspberry Pi
• IRFP264 HEXFET power MOSFET, 250V, 38A, TO-247
• 10pcs Robojax BC548 NPN and 10pcs BC558 PNP TO-92 complementary general-purpose transistors
• 2N2222 NPN transistor metal can TO-18
• BT16-800B Triac, 800V, 16A, snubberless, standard 16A triacs
• 50N06, SFP50N06, FQP50N06, KIA50N06: 50A, 60V N-channel power MOSFET, TO-220
• 50N06, SFP50N06, FQP50N06, KIA50N06: 50A, 60V N-channel power MOSFET TO-263
• IRFP640 TO-220 power MOSFET
• IRF3205 TO-220 power MOSFET
• IRF740 TO-220 power MOSFET
• IRF9405 TO-220 Power P-Channel -100V 13-19A MOSFET

126-

Voltage Regulartor

• LM7805 +5V Linear Voltage Regulator
• LM317 Variable Voltage Regulator, 1.2V to 37V, 1.5A
• LM2596 DC-to-DC 1.3-37V 2A Adjustable Voltage Regulator
• LM327L 3-terminal 0.1A positive adjustable regulator
• L7812 12V 1.5A voltage regulator TO-220

105-

Screws

• 10x Metal Socket-head Screws, M3 x 6mm, Hex-head
• Metal socket-head screws M2.5 x 6mm hex-head for F450 F550 frame
• 10x M3 8mm cross motor metal screws
• 10x M3 8mm Hexagonal metal black screw
• 10 pieces M3 x 10mm stainless steel Phillips machine screws
• 12 x M2 8mm black Phillips pan head screw
• 10x M3 3mm flat-head Phillips black screw

106-

Nuts

• 10px M3 3mm stainless steel hex full nut

107-

Spacers

• 4pc M3 10mm round aluminum alloy red spacer standoff
• M3 Female to Male Brass 10mm + 6mm Hexagonal Standoff

114-

Other Props

• Walkera Runner 250 (R) Advanced CW/CCW Propellers Runner 250(R)-Z-01

184-

Wireless Modules

• 2-pc Arduino 2.4 GHz Transceiver Module NRF24L01
• HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• ESP-01 ESP8266 Wi-Fi module for Arduino
• 8-pin adapter module NRF24L01 wireless transceiver
• AT24C256 DIP-8 EEPROM data storage module, 256kb with serial I2C interface
• AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 2pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 4pcs HC-05 Bluetooth Transceiver Module for Arduino, purchase it
• 2pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 4pcs 6-Pin HC-06 Bluetooth RF Transceiver Module HC-06 for Arduino and Rasperry Pi
• 2pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541
• 4pc AT-09 4.0 BLE Wireless Bluetooth Module CC2541

95-

Other Compatible with Arduino® Related

• USB cable for Arduino Uno
• MB102 Breadboard Power Supply Module, Arduino
• Prototype Shield, ProtoShield, with mini breadboard for Arduino
• Tiny microSD card module
• Infrared obstacle avoidance for a smart car
• 4-piece RGB LED module for Arduino
• Audio Decoder Controller Module Board MT8870 DTMF for Arduino phones
• Rangefinder digital display for HC-SR04 8-bit MCU module
• MOSFET IRF520 9.2A Driver Switch Module
• Type A female USB to DIP 2.54 mm PCB board adapter for Arduino
• USBASP, USBISP, AVR programmer, USB
• PCF8574T I/O I2C port interface support for Arduino cascading extended module
• D1 WiFi Development Board ESP-12F ESP8266 Arduino IDE UNO OTA Wemos IoT
• U-disk audio player SD card voice module WTV020-SD-16P for Arduino
• USBasp/USBisp AVR programmer USB with 10-pin converter to standard 6-pin adapter
• PCF8574 remote 8-bit I/O expander for I2C bus
• MAX485 Low-power, slew-rate-limited RS-485/RS-422 transceiver
• CH340 USB to RS485 converter adapter module for Windows, macOS, and Linux

167-

Sound Related Modules

• High-sensitivity sound detection module for Arduino, AVR, PIC
• DTMF MT8870 Module: Telephone Decoding for Raspberry Pi and Arduino

17-

Harware & Consumables

• 60 cm (2 feet) 5 mm heat shrink tubing, red and black
• 6x M3 plastic spacer, standoff, nut, and screw
• 10x Metal Socket-head Screws, M3 x 6mm, Hex-head
• 10 pieces M3 10mm white nylon spacers, screws, and nuts
• 4pc M3 10mm round aluminum alloy red spacer standoff
• Metal socket-head screws M2.5 x 6mm hex-head for F450 F550 frame
• 10x M3 8mm cross motor metal screws
• 10px M3 3mm stainless steel hex full nut
• M3 Female to Male Brass 10mm + 6mm Hexagonal Standoff
• 10x M3 8mm Hexagonal metal black screw
• 60 cm of 2 mm heat-shrink tubing, red and black
• 10 pieces M3 x 10mm stainless steel Phillips machine screws
• 10cc RMA-223 soldering paste flux grease
• 12 x M2 8mm black Phillips pan head screw
• 2pcs Electric Soldering Iron Tip Cleaning Sponge
• 10x M3 3mm flat-head Phillips black screw
• Thermal silicone paste compound for heat sink
• 20g Thermal Grease GD100 Heat Sink Paste with Adhesive, White
• 1.0g Syringe Heatsink Compound for CPU thermal transfer purposes

19-

Tools

• Carbon Fiber Magnetic Propeller Balancer
• Antistatic wrist strap
• T18 Blade Propeller Balancer for 250, 450, 500, 600, 700 RC Helicopter Quadcopters

20-

Raspberry Pi

• Raspberry Pi 2 Model B 1GB RAM
• Raspberry Pi 3 Official Case - Black
• Raspberry Pi 3 Official Case - White
• GPIO 20cm 40-pin Raspberry Pi cable
• GPIO expansion board for Raspberry Pi
• Raspberry Camera Module Board 1.3, 5MP Webcam Video with Cable

162-

USB Cables

• 20 cm micro USB cable