點擊放大圖片
1. Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
2. Power via USB or external source—5V or 7–16V (automatic selection).
3. On-board 150mA 5V regulator.
4. Built-in USB (and serial debugging).
5. Six I/O pins (two are used for USB only if your program actively communicates over USB; otherwise, you can use all six even if you are programming via USB).
6. 8k Flash memory (about 6k after bootloader).
7. I2C and SPI (via USI).
8. PWM on three pins (more possible with software PWM).
9. ADC on four pins.
10. Power LED and test/status LED
This is a USB version; plug it directly into the USB port of your computer.
資源與參考資料
暫時冇資源。
文件📁
冇文件可用。
