This power distribution board is for quadcopters with neat connections and built-in 5V and 12V BEC voltage.

 General:
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators (5V & 12V outputs)
- 6 ESC outputs & 1 pair VCC/GND pads
 
ESC outputs:
- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
 
BEC 5V output:
- Designed for RC receivers, flight controllers, OSDs, and servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max. 2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)  
 
BEC 12V output:
- Designed for video TX or FPV cameras with a linear regulator.
- The battery should be a 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max. 0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)
 
BEC 12V @ 3S LiPo
- Output voltage = 3S LiPo voltage -1V
 
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g (w/o XT60), 11g (w/ XT60)