The Walkera QR X350 revolutionized the multi-rotor market upon its release in 2013 by bringing GPS-stabilized multi-rotor flight to the R/C market at an affordable price. Walkera is breaking the rules again in 2016 with the release of the all-new QR X350 PRO, which boasts a whole host of new features and optimizations for aerial video/FPV use.

The all-new Walkera QR X350 PRO provides astonishing 25-minute flight times on the stock power system, features the all-new DEVO-M flight controller providing improved stability/GPS position holding and also is "Plug and Play" compatible with Walkera's G-2D brushless camera gimbal.

Feature 1 - Hold Position and Hold Altitude

This feature, when activated with a flip of a switch, keeps it at whatever altitude and position it is. Great for filming something with any movement and without any control.

Feature 2 - Return Home

If, for any reason, you cannot control or see the drone, just press a switch and it will return to where it started flight and will land automatically. This works automatically when the transmitter signal does not reach the quadcopter, and it will return home.

Feature 3 - Gimbal control

If an FPV system is installed, you can control the gimbal to pan or tilt.

The QR X350 PRO has an enhanced altitude sensor which adopts GPS technology, allowing it to work out its exact position in reference to the world. This allows the QR X350 PRO to hover in a stabilized position hold mode. With a simple one-switch flip or loss of signal, the QR X350 PRO will fly itself back to its take-off position and land! Additionally, it offers a manual mode for the sport flyer and even an onboard low-voltage warning system to alert you when it’s time to land.

This version of the QR X350 PRO comes completely ready to fly, including the high-quality, fully programmable DEVO 10 transmitter (with extended antenna providing a 2KM control range), 3S 5200mAh LiPoly flight battery and balance charger. Also included is the all-new G-2D brushless camera gimbal which is designed for use with Walkera's iLook HD FPV camera and also the GoPro Hero 3. The G-2D is pre-tuned from the factory, requiring no setup; simply bolt it on to the bottom of the QR X350 PRO, install your iLook or GoPro Hero 3 camera, and you're ready to shoot professional stabilized aerial video!

Features:
• Completely Ready to Fly
• High-capacity 3S 5200mAh LiPoly battery provides 25-minute flight times
• Improved precision flight control system
• Enhanced GPS position holding
• Altitude sensor
• Compass sensor
• G-2D brushless camera gimbal (compatible with iLook and GoPro Hero 3)
• One-Key "Return to Home"
• Stable mode with GPS and altitude hold
• Failsafe to return home & landing
• Low-voltage protection
• Deviation DEVO 10 programmable transmitter with 2KM control range (mode 2)
• Balance charger with world-compatible wall adapter
• Easy-to-see LEDs

Specs:
Main Rotor Diameter: 556mm
Main Rotor Blade Length: 206mm
Length: 289mm
Width: 289mm
Height: 200mm
Brushless Motor: WK-WS-28-008A
Brushless ESC: WST-15A(G/R)
Receiver: RX703
Main Controller: DEVO-M
Transmitter: DEVO 10
Battery: 3S 11.1V 5200mAh LiPoly
Flight Time: 25 minutes
Brushless Gimbal Support: G-2D (Compatible with iLook and GoPro Hero 3)

Includes:
Walkera QR X350 PRO Ready to Fly Quadcopter
G-2D brushless camera gimbal
Spare propellers
DEVO 10 Transmitter (Mode 2 - left stick throttle)
QR X350 PRO 11.1V 3S 5200mAh LiPoly battery
Balance Charger with world power plug adapters EU, UK, US, AUS

Required:
8 x AA batteries for transmitter

*Note: The QR X350 PRO uses 3.5mm bullet connectors for the battery plug. An XT60 adapter is available; please see related items below.