This kit contains four brushless 1000kv motors, four 30A ESCs, and four pairs (eight pieces) of 1045 propellers.

Safety arming feature: Regardless of the throttle stick position, the motor will not spin after battery connection.
Throttle calibration: The throttle range can be configured to provide the best throttle linearity, fully compatible with all commercially available transmitters.

Programmable items:
Brake setting: brake enabled/brake disabled.
Battery type: Li-xx (Li-ion or LiPo)/Ni-xx (NiMH or NiCd).
Low voltage protection mode (cutoff mode): gradually reduce the output power/cutoff the output power.
Low voltage cutoff protection threshold (cutoff threshold): low/medium/high.
Start mode: normal/soft/very soft.
Timing: low/medium/high.
Reset: Reset all programmable items to their default settings.
Full protection features: low voltage cutoff protection/over-heat protection/throttle signal lost protection.

Specifications:
XXD A2212 1000KV brushless outrunner motor:
KV: 1000
Max. efficiency: 80%
Max. efficiency current: 4-10A (>75%)
Current capacity: 12A/60s
No Load current @ 10V: 0.5A
No. of cells: 2-3 Li-Poly
Motor size: 27.5 * 27mm / 1.1 * 1.1in
Shaft diameter: 3.17mm / 0.1in
Weight: 48g / 1.7oz

30A Brushless ESC:
Output: Continuous 30A, burst 40A up to 10 seconds.
Input voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NiMH battery
BEC: 2A/5V (Linear mode).
Max speed: 210,000rpm for 2 poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: Brushless Motor)
Size: 45 * 24 * 11mm / 1.8 * 0.9 * 0.4in
Weight: 25g / 0.9oz