XH-W1411 DC 12V Multi-functional Temperature Controller Thermostat Switch

Project Video
Project Details

This product USES the single chip microcomputer control system + high precision temperature measuring probe, on temperature control performance and precision of temperature control is superior to similar products. This product three window design, start and stop values real-time display, and have intermittent work, time switch machine, and other functions, grown in the greenhouse, aquatic animal husbandry and aquaculture, room temperature control, etc. Can be widely used, is the good assistant of the life that occupy the home!

Chapters of this video tutorial

  • 00:00 Introduction
  • 03:44 Wiring explained
  • 04:40 How to use Temperature control
  • 05:15 How to use F-1 mode
  • 10:45 How to use F-2 mode
  • 11:29 Ho wto use F-3 mode
  • 12:11 How to turn OFF, How to reset and how to run the test
  • 13:29 How much current does this device need

Specifications of this module

  • Temperature control range -19°C to 99°C
  • Timer from 1 minute to 100 hours
  • Temperature measurement range: 55 ~ + 120°
  • Temperature measuring accuracy: plus or minus 0.3°
  • Resolution: 0.1°
  • Accuracy: 1°
  • Temperature measuring probe: NTC10K/B3950 standard 1 meters waterproof probe
  • Power supply voltage: DC12V
  • Display colors: red, green, blue and yellow (optional)
  • Applicable environment: - 25 to 55 degrees moisture 20% - 20% (gel)
  • The output type: 10. A relay output
  • Appearance size: 90 * 60 mm

If you found this Arduino course helpful, please support me so I can continue creating content like this. support me via PayPal