Lesson 63: Introduction to Using Relays with Arduino
Lesson 101-2: How to Turn On/Off an AC Bulb or Load Using a Relay with an IR Remote and Arduino
Lesson 105-4: How to Have an Unlimited Arduino Alarm Using a DS1307 RTC Module
In this lesson, we have seven projects in one. We learn how to use the DS1307 Real-Time Clock (RTC) ...
Lesson 105-2: Alarm Clock Using a DS1307 with Arduino
In this lesson, we have seven projects in one. We learn how to use the DS1307 Real-Time Clock (RTC) ...
Overcurrent Protection with Winson WCS Current Sensors and an Arduino
This tutorial by Robojax explains how to use Winson WCS Current sensor to measure DC current and ...
Overcurrent Protection with Winson WCS Current Sensors and an Arduino LCD
This tutorial by Robojax explains how to use a Winson WCS Current sensor to measure DC current and u...
How to Control an AC Bulb or Load Using an ESP32 over Wi-Fi with a Relay
This tutorial explains how to control a relay module using an ESP32 board over Wi-Fi. It enables you...
Arduino code to use an NJK-5002C Hall sensor
This is the Arduino code to use the NJK-5002C Hall sensor to control a DC or AC load with and withou...
Control an AC bulb using any infrared remote with an Arduino and relay
In this tutorial, we will learn how to use an infrared remote control to operate an AC bulb via an A...
Controlling AC bulb from the Windows Command Line via USB
In this tutorial, we will learn how to control an AC bulb using a USS relay module via the Windows C...
