User Input & Buttons
Lesson 107-8: Controlling the Speed of a 28BYJ-48 Stepper Motor Using a Potentiometer
Project 8: Controlling Stepper Motor Using a Potentiometer – 28BYJ-48 Stepper MotorThis article pres...
Lesson 107-7: Sending a 28BYJ-48 Stepper Motor to Any Angle with Defined STPB-5 Push Buttons
Project 7: Multiple Buttons for Angle, Speed, and Direction – Using STPB-5 – 28BYJ-48 Stepper MotorT...
Lesson 107-6: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons, with Angle and Speed STPB-4
Project 6: Variable Angle and Speed Using Push Button STPB-4 – 28BYJ-48 Stepper MotorThis article co...
Lesson 107-4: Controlling a 28BYJ-48 Stepper Motor Using Two Push Buttons, CW, CCW (Keep Pressed), STPB-2
Project 4: Push Button Hold-to-Run Using STPB-2 – 28BYJ-48 Stepper MotorThis article covers the four...
Lesson 107-3: Controlling a 28BYJ-48 Stepper Motor Using Three Push Buttons: CW, CCW, and Stop (STPB-1)
Project 3: Controlling Stepper Motor Using Push Button STPB-1 – 28BYJ-48 Stepper MotorThis article i...
Lesson 108-3: Using HW-532 to Control Motor Speed with Potentiometer and Push Button Using Arduino
This is for controlling the speed of the motor using a variable resistor (potentiometer), and we use...
Lesson 109-5: Setting Output Voltage with a Push Button Using an MCP4725 DAC with Arduino
In this lesson, we learn how to use the MCP4725 12-bit digital-to-analog converter (DAC). The chip a...
Lesson 110-5: Adjust Delay Sequence Time for a 7-Segment LED Display Using a Potentiometer
This code is to introduce the 74HC595 to drive 8 LED lights and turn them on from 0 to 8 one by one ...
Control 10 output pins using 10 push-button switches with 1 Arduino input pin ANPB-V2
In this video, I've shown how to use 1kΩ resistors and, for ground resistors, I've selected a 100kΩ ...
How to Use Up to 10 Push-Button Switches with 1 Arduino Input Pin ANPB-V1
In this video, I've shown how to use 1kΩ resistors and, for ground resistors, I've selected a 100kΩ ...
Servo Motor with Potentiometer and LCD with Arduino, No Breadboard - SP-LCD-2
In this video, we learn how to control the angle of a servo motor using a potentiometer (variable re...
Servo Motor with Potentiometer and LCD with Arduino: SP-LCD-1
In this video, we learn how to control the angle of a servo motor using a potentiometer (variable re...
