Other Arduino Codes and Videos by Robojax
This video shows how to Send Stepper Motor 28BYJ-48 using ESP8266 NodeMCU or D1 Mini over WiFi using your mobile phone
/*
* Controlling 28BYJ-48 Stepper Motor over WiFi using ESP8266,
* NodeMCU and D1 Mini
* using broswer push buttons to send motor to any angles over WiFi and mobile phone.
*
* For each push button we can set
* -Angle
* -Speed
* -Direction
*
* Watch Video instrution for this code:https://youtu.be/OZ0kaZmmW2I
*
* This project is available for ESP32 as well: https://youtu.be/DYuBUxHHSas
*
* Full explanation of this code and wiring diagram is available at
* my Arduino Course at Udemy.com here: http://robojax.com/L/?id=62
* Written by Ahmad Shamshiri on June 14, 2020
* in Ajax, Ontario, Canada. www.robojax.com
*
* Get this code and other Arduino codes from Robojax.com
Learn Arduino step by step in structured course with all material, wiring diagram and library
all in once place. Purchase My course on Udemy.com http://robojax.com/L/?id=62
If you found this tutorial helpful, please support me so I can continue creating
content like this. You can support me on Patreon http://robojax.com/L/?id=63
or make donation using PayPal http://robojax.com/L/?id=64
* * This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.*
* This code has been download from Robojax.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Copyright (c) 2015, Majenko Technologies
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* * Neither the name of Majenko Technologies nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
///watch video for details of lines below
//static const uint8_t D0 = 16;
//static const uint8_t D1 = 5;
//static const uint8_t D2 = 4;
//static const uint8_t D3 = 0;
//static const uint8_t D4 = 2;
//static const uint8_t D5 = 14;
//static const uint8_t D6 = 12;
//static const uint8_t D7 = 13;
//static const uint8_t D8 = 15;
//static const uint8_t D9 = 3;
//static const uint8_t D10 = 1;
const int CW =1;
const int CCW =2;
const int STOP =3;
int Pin1 = D1;//IN1 is connected
int Pin2 = D2;//IN2 is connected
int Pin3 = D3;//IN3 is connected
int Pin4 = D4;//IN4 is connected
long angles[] = {360, 270, 90, 20};//angles of each push button
int directions[] ={CW, CCW, CW, CCW};//direction of eacch push button
int speedFactors[] = {1, 1, 4, 10,};//speed for each push button
const String statusTitle[]={
"Motor sent to ",
"Motor sent to ",
"Motor sent to ",
"Motor sent to "};
const String directionTitle[]={"CW", "CCW"};
const String stopPushButtonTitle="STOP";
const String topTitle1 ="° in ";
const String topTitle2 ="Speed factor: ";
const String topTitle3 ="Angle: ";
const String topTitle4 ="Direction: ";
const String topTitle5 =", Speed: ";
const String topTitle6 ="Send";
const String customMainTitle ="( C )Motor sent to ";
const int customValueButtonID=99;
const String motorStopped ="Motor Stopped";
int correction_CW = 150;//watch video for details
int correction_CCW = 150;//watch video for details
int poleStep = 0;
long stepVale =0;
const int SPR=64*64;
long goToAngle=0;
int activeButton=0;
int speedValue =1;
int pole1[] ={0,0,0,0, 0,1,1,1, 0};//pole1, 8 step values
int pole2[] ={0,0,0,1, 1,1,0,0, 0};//pole2, 8 step values
int pole3[] ={0,1,1,1, 0,0,0,0, 0};//pole3, 8 step values
int pole4[] ={1,1,0,0, 0,0,0,1, 0};//pole4, 8 step values
int count=0;
int dirStatus = STOP;// stores direction status 3= stop (do not change)
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>
#ifndef STASSID
#define STASSID "YOURWIFI SSID"
#define STAPSK "YOUR WIFI PASSWORD"
#endif
const char *ssid = STASSID;
const char *password = STAPSK;
ESP8266WebServer server(80);
void handleRoot() {
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
String HTML ="<!DOCTYPE html>\
<html>\
<head>\
<title>Robojax ESP*266 Stepper Motor</title>\
<meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">\
<style>\
html,body{
width:100%\;
height:100%\;
margin:0}
*{box-sizing:border-box}
.colorAll{
background-color:#90ee90}
.colorBtn{
background-color:#add8e6}
.angleButtdon,a{
font-size:30px\;
border:1px solid #ccc\;
display:table-caption\;
padding:7px 10px\;
text-decoration:none\;
cursor:pointer\;
padding:5px 6px 7px 10px}a{
display:block}
.btn{
margin:5px\;
border:none\;
display:inline-block\;
vertical-align:middle\;
text-align:center\;
white-space:nowrap}
";
HTML +="</style>
</head>
<body>
<h1>Robojax ESP8266 Stepper ESP8STP-2 </h1>
";
if(dirStatus !=STOP && activeButton !=customValueButtonID ){
HTML +="
<h2><span style=\"background-color: #FFFF00\">";
HTML +=statusTitle[activeButton];
HTML +=String(angles[activeButton]);
HTML +=topTitle1;
HTML +=directionTitle[directions[activeButton]-1]; //subtract 1 to get proper title
HTML +="</span></h2>
";
HTML +="
<h2>";
HTML +=topTitle2;
HTML +=String(speedFactors[activeButton]);
HTML +="<span style=\"background-color: #FFFF00\"> (";
float timeTakes =(float)speedFactors[activeButton] * float(angles[activeButton]) * ((float)4/(float)360);//calculat the time that takes to move to that angle
HTML +=String(timeTakes);
HTML +=" seconds)";
HTML +="</span></h2>
";
}if(activeButton ==customValueButtonID ){
HTML +="
<h2><span style=\"background-color: #FFFF00\">";
HTML +=customMainTitle;
HTML +=String(goToAngle);
HTML +=topTitle1;
HTML +=directionTitle[dirStatus-1]; //subtract 1 to get proper title
HTML +="</span></h2>
";
HTML +="
<h2>";
HTML +=topTitle2;
HTML +=String(speedValue);
HTML +="<span style=\"background-color: #FFFF00\"> (";
float timeTakes =(float)speedValue * float(goToAngle) * ((float)4/(float)360);//calculat the time that takes to move to that angle
HTML +=String(timeTakes);
HTML +=" seconds)";
HTML +="</span></h2>
";
}else if(dirStatus ==STOP)
{
HTML +="
<h2><span style=\"background-color: #FFFF00\">";
HTML +=motorStopped;
HTML +="</span></h2>
";
}
HTML +=" <div class=\"btn\">
<a class=\"angleButton\" style=\"background-color:#";
HTML +="f59898";//set the color of buttons if active or not
HTML +=" \" href=\"/stop";
HTML +="\">";
HTML +=stopPushButtonTitle;//tilte on button
HTML +="</a>
</div>
";
for (byte i = 0; i < (sizeof(angles) / sizeof(angles[0])); i++) {
HTML +=" <div class=\"btn\">
<a class=\"angleButton\" style=\"background-color:#";
if(i ==activeButton)
{
HTML +="f59898";//set the color of buttons if active or not
}else{
HTML +="90ee90";//set the color of buttons if active or not
}
HTML +=" \" href=\"/go?";
HTML +="angle=";
HTML +=angles[i];
HTML +="\">";
HTML +=angles[i];//tilte on button
HTML +="° "; //degree symbol for HTML °
HTML +=directionTitle[directions[i]-1];
HTML +="</a>
</div>
"; //degree symbol for HTML °
}
//custom angle
HTML +="<form action=\"/go\" method=\"get\">
";
HTML +="<label for=\"angle\">
";
HTML += topTitle3;
HTML +="</label>
";
HTML +="<input type=\"text\" id=\"angle\" name=\"angle\" value=\"
";
HTML +=String(goToAngle);
HTML +="\" maxlength=\"4\" size=\"4\">
";
HTML +="<input type=\"radio\" id=\"cw\"
";
if( dirStatus ==1){
HTML +="checked=\"checked\"";
}
HTML +=" name=\"d\" value=\"1\">
";
HTML +="<label for=\"cw\">CW</label>
";
HTML +="<input type=\"radio\" id=\"ccw\"
";
if( dirStatus ==2){
HTML +="checked=\"checked\"";
}
HTML +=" name=\"d\" value=\"2\">
";
HTML +="<label for=\"female\">CCW</label>
";
HTML +="<label for=\"spd\">
";
HTML +=topTitle5;
HTML +="</label>
";
HTML +="<input type=\"text\" id=\"spd\" name=\"s\" value=\"1\" maxlength=\"2\" size=\"4\"><br>
";
HTML +="<input type=\"submit\" value=\"
";
HTML +=topTitle6;
HTML +="\">
";
HTML +="</form>
";
HTML +="
</body>
</html>
";
server.send(200, "text/html", HTML);
}//handleRoot()
///////////////////////////////
void handleNotFound() {
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
String message = "File Not Found
";
message += "URI: ";
message += server.uri();
message += "
Method: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "
Arguments: ";
message += server.args();
message += "
";
for (uint8_t i = 0; i < server.args(); i++) {
message += " " + server.argName(i) + ": " + server.arg(i) + "
";
}
server.send(404, "text/plain", message);
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
}//end of handleNotFound()
void setup(void) {
pinMode(Pin1, OUTPUT);//define pin for ULN2003 in1
pinMode(Pin2, OUTPUT);//define pin for ULN2003 in2
pinMode(Pin3, OUTPUT);//define pin for ULN2003 in3
pinMode(Pin4, OUTPUT);//define pin for ULN2003 in4
Serial.begin(115200);//initialize the serial monitor
Serial.println("Robojax 28BYJ-48 Steppper Motor Control");
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
Serial.println("");
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: http://");
Serial.println(WiFi.localIP());
//multicast DNS
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
if (MDNS.begin("robojaxESP8266")) {
Serial.println("MDNS responder started");
Serial.println("access via http://robojaxESP8266");
}
server.on("/", handleRoot);
server.on("/go", HTTP_GET, motorControl);
server.on("/stop",HTTP_GET, stopMotor);
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}//end of setup
void loop(void) {
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
server.handleClient();
MDNS.update();
//Watch details at my Arduino Course at Udemy.com
stepVale = (SPR * goToAngle)/360 ;
if(poleStep>7){
poleStep=0;
}
if(poleStep<0){
poleStep=7;
}
if(dirStatus ==CCW){
poleStep++;
count++;
if(count+correction_CCW <= stepVale)
{
driveStepper(poleStep);
}else{
driveStepper(8);
}
//full explannation at Arduino Course on Udemy.com see link above
}else if(dirStatus ==CW){
poleStep--;
count++;
if(count+correction_CW <=stepVale)
{
driveStepper(poleStep);
}else{
driveStepper(8);
}
}else{
driveStepper(8);
}
delay(speedValue);
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
}//end of loop
/*
* motorControl()
* updates the motor parameters upon receiving request from web interface
* returns nothing
* written by Ahmad Shamshiri
* on Wednesday Jun 13, 2020 in Ajax, Ontario, Canada
* www.robojax.com
*/
void motorControl() {
//Robojax.com ESP8266 Stepper Push button Any Angle ESP8STP-2
//Watch details at my Arduino Course at Udemy.com
//see this https://www.arduino.cc/reference/en/language/variables/utilities/sizeof/
for (byte i = 0; i < (sizeof(angles) / sizeof(angles[0])); i++) {
if(server.arg("angle") == String(angles[i]) )
{
goToAngle =angles[i];
dirStatus =directions[i];
count =0;
activeButton =i;
speedValue=speedFactors[i];
}//if
}//for
//Watch details at my Arduino Course at Udemy.com
if(server.arg("d").toInt() >0 )
{
goToAngle =server.arg("angle").toInt();
dirStatus =server.arg("d").toInt();
count =0;
activeButton =customValueButtonID;
speedValue=server.arg("s").toInt();
}
handleRoot();
//Robojax.com ESP8266 Stepper Motor ESP8STP-2 Code
}//motorControl end
/*
* @brief sends signal to the motor
* @param "c" is integer representing the pol of motor
* @return does not return anything
*
* www.Robojax.com code June 2019
*/
void driveStepper(int c)
{
//Watch details at my Arduino Course at Udemy.com
digitalWrite(Pin1, pole1[c]);
digitalWrite(Pin2, pole2[c]);
digitalWrite(Pin3, pole3[c]);
digitalWrite(Pin4, pole4[c]);
}//driveStepper end here
/*
* @brief stops the motor immediately
* @param none
* @return does not return anything
* written by Ahmad Shamshiri
* www.Robojax.com code June 13, 2020 in Ajax, Ontario, Canada
*/
void stopMotor()
{
//Watch details at my Arduino Course at Udemy.com
dirStatus=STOP;
handleRoot();
}//stopMotor()
If you found this tutorial helpful, please support me so I can continue creating content like this. support me via PayPal 