Other Arduino Codes and Videos by Robojax

Control Servo motor using Potentiometer and ESP32: Servo Pot. ESP-SERV2

دروس آردوینو به فارسی

Control Servo motor using Potentiometer and ESP32: Servo Pot. ESP-SERV2

This video shows how to control position of Servo Motor using Potentiometer and ESP32 Microcontroller to move it from 0° to 180° or from 180° to 0° or set your own values. You need to download the libary specifically work with ESP32 Arduino IDE/

We have 3 type of controling Servo Motor with ESP32

The link to use in the "preferences" of Arduino IDE for ESP32 board https://dl.espressif.com/dl/package_esp32_index.json Watch video for instructions.

Resources for this sketch

Code ESP-SERV2 controling Servo motor Using Potentiometer

 * Original sourse: https://github.com/RoboticsBrno/ESP32-Arduino-Servo-Library
 * This is Arduino code to control Servo motor with ESP32 boards.
 The position of servo is controlled by the position of Potentiometer (variable resistor)
 * Watch video instruciton for this code: https://youtu.be/r-uLfILKqyY
 * Written/updated by Ahmad Shamshiri for Robojax Video channel www.Robojax.com
 * Date: Dec 17, 2019, in Ajax, Ontario, Canada
 * Permission granted to share this code given that this
 * note is kept with the code.
 * Disclaimer: this code is "AS IS" and for educational purpose only.
 * this code has been downloaded from http://robojax.com/learn/arduino/
* Get this code and other Arduino codes from Robojax.com
Learn Arduino step by step in structured course with all material, wiring diagram and library
all in once place. Purchase My course on Udemy.com http://robojax.com/L/?id=62

Get early access to my videos via Patreon and have  your name mentioned at end of very 
videos I publish on YouTube here: http://robojax.com/L/?id=63 (watch until end of this video to list of my Patrons)

or make donation using PayPal http://robojax.com/L/?id=64

 * This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.* 
 * This code has been download from Robojax.com
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.
#include <Servo_ESP32.h>

static const int servoPin = 14; // pin printed as G14 or 14
static const int potentiometerPin = 12;// pin printed as G12 or 12

Servo_ESP32 servo1;

void setup() {

void loop() {
	// robojax.com code with video 
    int servoPosition = map(analogRead(potentiometerPin), 0, 4096, 0, 180);

If you found this tutorial helpful, please support me so I can continue creating content like this. support me via PayPal