Lesson 60: "while" and "do while" loops | Arduino Step By Step Course
Lesson 60: "while" and "do while" loops | Arduino Step By Step Course
Please select other codes for this lecture from the links below.
Part 6: Arduino Practial Programming
In this lesson we learn how to execute conditions with "while" and "do while" loops. this is exampel 4. Please watch the video for full details.
- 00:00 Introduction
- 01:22 Example 1
- 03:41 Example 2
- 05:11 Example 3
- 07:07 Example 4
- 07:44 Do while
/*
* Lesson 60-4: While and do while loop | Arduino Step by Step course by robojax
This code is "do while" loop example
watch full details: https://youtu.be/rbUiiJ1aSFg
*
* written by Ahmad Shamshiri on Dec 28, 2021 at 06:46 in Ajax, Ontario, Canada
* this code can be obtained from Robojax.com
This code is available at http://robojax.com/course1/?vid=lecture67
with over 100 lectures Free On YouTube Watch it here http://robojax.com/L/?id=338
Get the code for the course: http://robojax.com/L/?id=339
or make donation using PayPal http://robojax.com/L/?id=64
* This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.*
* This code has been download from Robojax.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
int b = 0;//
//the code inside setup() runs once.
void setup() {
Serial.begin(9600);
Serial.println("Lesson: 60-4: While and Do while");
while( b < 4)
{
Serial.println(b);
b++;
if(b==2){ break;}
}
}//setup end
void loop() {
//robojax.com code. nothing inside loop here
}