• Arduino CodeNEW
  • Download
  • 0
    Product Quantity Price Total
    $0.00 $0.00
    Micro MinimOsd  with KV TEAM MOD for Naze32 Micro MinimOsd  with KV TEAM MOD for Naze32
    Micro mini OSD Micro mini OSD
    Micro mini OSD Micro mini OSD
    Micro mini OSD Micro mini OSD
    Micro mini OSD Micro mini OSD
    Micro mini OSD Micro mini OSD
    Micro mini OSD Micro mini OSD
    Femal to femal jumper wire Femal to femal jumper wire

    Micro MinimOsd with KV TEAM MOD for Naze32

    • Part numberTEL-00097
    • Stock Sold out
    Wholesale only

    Share this page

    What's included

    • What's included
    • 20cmm femal to femal jumper wire6x
    • Micro mini OSD1x
    • Connector PIN1set

    Product Description

    To print telemetry data on the video before transmitting it to FPV for Naze32 Flight Controller board

     

    Features:
    - Onboard 5V and 12V switching power supplies.
    - Direct connections to naze when stacked.
    - Cam and vtx 3pin headers with selectable 12v or 5v power from onboard regs.
    - Can power naze and anything else attached to naze, so you can disconnect the red power wire from all escs.
    - Onboard micro-USB plug for flashing/configuring your favourite OSD software. Anything that works on MinimOSD will also work on this.
    - Voltage dividers for both battery sources (main batt/video batt voltage sensors).
    - Series protection resistors for RSSI and current sensor connections. RSSI can be filtered from high-frequency PWM into an analogue signal by enabling the RSSI filter solderjumper.
    - Extremely bright, blinding LEDs.

    Specification:
    - With straight pin and side pin, please solder by yourself
    - For Naze 32

    Required:

    You need FTDI or some other USB interface to program this. Have a look at the related products on the right.

     

    • What's included
    • 20cmm femal to femal jumper wire6x
    • Micro mini OSD1x
    • Connector PIN1set

    Related Videos

    Download

    No file found for download