• Arduino CodeNEW
  • Download
  • 0
    Product Quantity Price Total
    $0.00 $0.00
    Raspberry Camera Module Board 1.3 5MP Webcam Video with Cable Raspberry Camera Module Board 1.3 5MP Webcam Video with Cable
    Raspberry Pi Camera Raspberry Pi Camera
    Raspberry Pi Camera Raspberry Pi Camera
    Raspberry Pi Camera Raspberry Pi Camera
    Raspberry Pi Camera Raspberry Pi Camera

    Raspberry Camera Module Board 1.3 5MP Webcam Video with Cable

    73
    • Part numberRPI-00498
    • Stock 73 Sold out
    Wholesale only

    Share this page

    What's included

    • What's included
    • Raspberry Pi Camera1x
    • Camera cable1x

    Product Description


    Raspberry send camera module supports both Model A and Model B+ version of the raspberry pie, light-sensitive chip used in the module is produced by a quarter inch OmniVision OV5647 chip, can be connected directly with raspberry soft cable sent by the control board . It is equipped with 5 million pixel image sensor, can record 30 frames per second (no Caton) 1080p Full HD video, or capture 2592x1944 resolution images, and you can also send raspberry installed in your small car, by Wi-Fi wireless monitoring production car. You can also apply image recognition and image tracking, creativity, wonderful moment in the brain, come on!


    Parameters:5 million pixels
    Resolution: 2952 × 1944
    Camera parameters:CMOS size: 1/4 inch
    Diagonal: 72 degrees
    The best pixel sensor: 1080p


    Support 1080P30, 720P 60,640 * 480P 60/90 video recording
    Application: aerial photography, car real-time camera, indoor and outdoor monitoring, camera, video. . . .
    Hardware connection:
    1 soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
    Before
    2. tear protective film on the lens
    3 bare boards, pay attention to ESD damage, beware of static electricity!


    Software:
    1. RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade;
    2. raspi-config, select the camera, start RPi firmware camera driver, and then restart
    3 using the command-line program raspivid and raspistill operate camera to capture video clips or images
    4 to capture video clips need to play with mplayer

    • What's included
    • Raspberry Pi Camera1x
    • Camera cable1x

    Related Videos

    Download

    No file found for download