FPV Combo kit includes LCD Monitor, TX, RX, Camera, LCD Mound and Sun hood

This is everything you need to start using your drone as FPV (first person's view).

1-LCD Monitor:

No blue when lose signal
• 7.0 inch TFT LCD Display
• Ideal for use with FPV
• 800 x 480 High Resolution Display
• LED Backlight
• 16:9 Display Ratio
• 15ms Response Time
• 500:1 Contrast Ratio
• Wide 6~18V DC Input Voltage Range

LCD Monitor Specs:
Panel Size: 7.0 inch
Panel Type: TFT LCD
Resolution: 800x480
Backlight: LED
Horizontal Frequency Range: 30~60kHz
Field Frequency Range: 50~75Hz
Dot Pitch: 0.0642 (W) x 0.1790 (H) mm
Display Ratio: 16:9
Brightness: 400 cd;
Contrast Ratio: 500:1
Response Time: 15ms
Viewing Angle: 70°/70° (L/R) 50°/60° (U/D)
Input Voltage: DC 6~18V
Power Consumption: ≤ 5W
Working Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Dimensions: 182 x 127 x 32mm
Weight: 363g

2-Camera:

Product Name: Boscam800
Product Weight: 13g
Size: 35 * 35 * 35mm (not including bracket)
Imaging System: 800TVL 170 Degree 2.1MM  line color
Support format: PAL mode (supports by the monitor)

3-Transmitter TS351:

5.8G 200mW AV wireless receiver and transmitter TS351

Features of 5.8G 200mW AV wireless receiver and transmitter:
5.8G 8ch transmitter
With channel DIN-switch to change channels

Specificaitons of 5.8G 200mW AV wireless receiver and transmitter:
Transmitter frequency:5705-5945MHz;8CH
Transmitting Power:200mW/23dBm
Transmitting distance:>2000m(open area)
AV input:analog AV signal input
power supply:6.5-15 volts
Current supply:200mA
Size:55*26*17mm
Remark:The transmitter's power input is ranging from 7-12V,however the voltage outptu from the TX for the camera us 0.5V,lower than the input power.It's suggested to use 3S lipo 11.1V battery.
Note:antennas must be attched before powering on.

Default: Antenna connector:SMA(Inside the needle)

Frequency of each channel:
CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645
CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945

4-Receiver Boscam RC805:

Receiving frequency:5725-5865MHz;8CH
Receiving sensitivity:-90dBm
Double lines AV output:analog AV signal output
Power supply voltage: 8-12V
Supply current: 100mA
Dimension: 75*54*15
Remark:The receiver's power input is ranging from 8-12V,dual AV output is supported
AV calbe: 3.5mm plug on the receiver
Default: Antenna connector:SMA(Inside the needle)

Frequency of each channel:
CH1:5705 - CH2:5685 - CH3:5665 - CH4:5645
CH5:5885 - CH6:5905 - CH7:5925 - CH8:5945

5-Mnitor mount supportFeatures:

Material: 2mm Glass Fiber.
Suitable for the transmitter, and display mast have fixed nut.
Light weight, High strength.
Suitable for 7inch or 8inch monitor.
Compatible with futaba 9c 10c JR 9c WFLY transmitter etc.

Specifications:
Total weight: 60g / 2.1oz

6-Sun hood.

Very large and 15cm deep sun shade made of fabric with internal support to hold it..