• Arduino ® Code

    NEW
  • Download
  • 0
    Product Quantity Price Total
    $0.00 $0.00
    APM2.6 ArduPilot Mega APM 2.6 Flight Control (Side connector) APM2.6 ArduPilot Mega APM 2.6 Flight Control (Side connector)
    APM 2.6 Controller board APM 2.6 Controller board
    APM 2.6 Controller board APM 2.6 Controller board
    APM 2.6 Controller board APM 2.6 Controller board
    Telemetry and i2C cables Telemetry and i2C cables

    APM2.6 ArduPilot Mega APM 2.6 Flight Control (Side connector)

    • Part numberFCT-00025
    • Stock Sold out
    For Information only. Not available to sell.

    Share this page

    What's included

    • What's included
    • APM2.6 Flight Controller board1x
    • Protective shell1x
    • Telemetry cable1x
    • i2C cable1x

    Product Description

    Flight Controller for multi rotor which can be used for

     The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

    APM Frame types

    Frame Type Configuration for APM

    This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass (see option below), so that the GPS/Compass unit can be mounted further from noise sources than APM itself.



    Features:

    Arduino Compatible!

    Comes pre-soldered (with angle pins) and tested.

    Includes 3-axis gyro, accelerometer along with a high-performance barometer

    External Compass (Optional)

    Onboard 4 MP Dataflash chip for automatic datalogging

    Optional off-board GPS, uBlox NEO6 (select GPS option from options)

    One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.

    Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.

    Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.

    Note: This Board has Side connectors
    • What's included
    • APM2.6 Flight Controller board1x
    • Protective shell1x
    • Telemetry cable1x
    • i2C cable1x

    Related Videos

    Download

    File Title

    Download

    Official Guide for start using APM