Other Arduino Codes and Videos by Robojax

How to use DiyMore SHT2000 Temperature and Humidity Controller- Robojax

This is video shows step by step using this thermostate to be used a heater controller or cooler controller with temperature or humididy control with examples.

Supply voltage: AC 110~230V/ DC 12-72V
Power supply frequency: 50/60Hz
Temperature range: -20~60°C
Humidity measurement range: 0%~100%RH
Temperature measurement accuracy: 0.3 °C
Humidity measurement accuracy: 3%
Output control: relay output
Output power: MAX 10A

LLL and HHH displayes

When the LLL is displayed, the temperature probe is not inserted, disconnected, damaged, and need replaced.
When HHH is displayed, the temperature probe is short-circuited and the temperature detection range is exceeded.

If you found this tutorial helpful, please support me so I can continue creating content like this. support me via PayPal