Back to Arduino Step By Step Course

Lesson 104: Arduono Energy Meter to measure DC Voltage, Current, Power and Energy

If you don't like to see ads while video is being played you can purchase this course for $200 from Udemy or purchase YouTube premium Here

Please select other codes for this lecture from the links below.

  • Lesson 19: Introduction to LCD screen
  • Purchase Shunt resistor from Amazon USA
  • Purchase Shunt resistor from Amazon Canada
  • Purchase Shunt resistor from all other Amazon
  • Purchase LCD Screen from Amazon USA
  • Purchase LCD Screen from Amazon Canada
  • Purchase LCD Screen from all other Amazon
  • Part 5: Measuring Voltage and Current Using Arduino

    In this lesson we learn how to measure current using Shunt Resistor and Arduino. Please watch video and get code for LCD1602 from Lesson 19: Introduction to LCD Screen

    Purchase from Affiliated stores


    
     
    
    /*
     * Lesson 104: This Arduin to measure DC Current using The 75mV Shunt up to 500A
     *  50A 75mV, 100A 75mV, 200A 75mV, 300A, 500A 
     * 
    
     * 
     * Watch Video instrution for this code: https://youtu.be/oufDb7AtvNk
     
     * Written by Ahmad Shamshiri on May 10, 2020 at 04:18 in Ajax, Ontario, Canada
     * in Ajax, Ontario, Canada. www.robojax.com
     * 
    * 
     * This code is part of Arduino Step by Step Course which starts here:  https://youtu.be/-6qSrDUA5a8
     * 
     * for library of this code visit http://robojax.com/
     * 
    If you found this tutorial helpful, please support me so I can continue creating 
    content like this. Make a donation using PayPal by credit card https://bit.ly/donate-robojax 
    
     *  * This code is "AS IS" without warranty or liability. Free to be used as long as you keep this note intact.* 
     * This code has been download from Robojax.com
        This program is free software: you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation, either version 3 of the License, or
        (at your option) any later version.
    
        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.
    
        You should have received a copy of the GNU General Public License
        along with this program.  If not, see .
    
    
    */
    
    const int inPin =A0;//can change
    const float SHUNT_CURRENT =100.00;//A
    const float SHUNT_VOLTAGE =75.0;// mV
    const float CORRECTION_FACTOR = 2.00;
    
    
    const int ITERATION = 50; //can change (see video)
    const float VOLTAGE_REFERENCE = 1100.00;//1.1V
    const int BIT_RESOLUTION =10;//and 12 for Due and MKR
    const boolean DEBUG_ONCE = true;
    
    // the setup routine runs once when you press reset:
    void setup() {
      // initialize serial communication at 9600 bits per second:
      Serial.begin(9600);
      Serial.println("Robojax 50A Current for Arduino");
      //for line below see https://www.arduino.cc/reference/en/language/functions/analog-io/analogreference
      analogReference(INTERNAL);//1.1V internal reference
      //analogReadResolution(BIT_RESOLUTION);//only Arduino with Due and MKR
      delay(500);
    }
    
    // the loop routine runs over and over again forever:
    void loop() {
     //robojax.com 50A Shunt Current Measurement for Arduino
        
      //printDebug();
      printCurrent();
      //getCurrent();
    
    
      delay(500);
    }
    
    /*
     * getCurrent()
     * @brief gets current
     * @param none
    
     * @return returns one of the values above
     * Written by Ahmad Shamshiri for robojax.com
     * on May 10, 2020 at 03:05 in Ajax, Ontario, Canada
     */
    float getCurrent()
    {
     //robojax.com 50A Shunt Current Measurement for Arduino
    
        float averageSensorValue =0;
        int sensorValue ;
        float voltage, current;
    
        for(int i=0; i< ITERATION; i++)
        {   
          sensorValue = analogRead(inPin);
          delay(5);
          if(sensorValue !=0 && sensorValue < 100)
          {
            voltage = (sensorValue +0.5) * (VOLTAGE_REFERENCE /  (pow(2,BIT_RESOLUTION)-1)); 
            current  = voltage * (SHUNT_CURRENT /SHUNT_VOLTAGE )  ;
            if(i !=0){
              averageSensorValue += current+CORRECTION_FACTOR;
            }
            delay(1);
          }else{
            i--;
          }
        }    
       //IGNORE_CURRENT_BELOW
        averageSensorValue /=(ITERATION-1);
        return   averageSensorValue;
    }//getCurrent()
    
    /*
     * printCurrent()
     * @brief prints  the current on serial monitor
     * @param none
     * @return none
     * Written by Ahmad Shamshiri for robojax.com
     * on May 08, 2020 at 02:45 in Ajax, Ontario, Canada
     */
    void printCurrent()
    {
       Serial.println("Current:");
       Serial.print(getCurrent(),2);
       Serial.println("A");
       Serial.println();
       
     
    }//printCurrent()
    
    
    /*
     * printDebug()
     * @brief prints  the full details of current measurement
     * @param none
     * @return none
     * Written by Ahmad Shamshiri for robojax.com
     * on May 08, 2020 at 02:45 in Ajax, Ontario, Canada
     */
    void printDebug()
    {
      //robojax.com 50A Shunt Current Measurement for Arduino
        Serial.print("Debug Details Measureing ");
        Serial.print(ITERATION);
        Serial.println(" Times");
        Serial.print("Reading from pin: 	");
        Serial.println(inPin); 
        
        Serial.print("Shunt Voltage: 		");
        Serial.print(SHUNT_VOLTAGE);Serial.println("mV"); 
        Serial.print("Shunt Current: 		");
        Serial.print(SHUNT_CURRENT);Serial.println("A"); 
        Serial.print("Voltage Reference: 	");
        Serial.print(VOLTAGE_REFERENCE);Serial.println("mV"); 
        Serial.print("Bits Resolution: 	");
        Serial.print(BIT_RESOLUTION);Serial.println(" bits"); 
        Serial.println();        
        Serial.println("Sensor	Voltage		Current");    
        int sensorValue ;
        float voltage, current;
        float averageCurrentValue=0;
    
        for(int i=0; i< ITERATION; i++)
        {   
          sensorValue = analogRead(inPin);
          delay(5);
          if(sensorValue !=0 && sensorValue < 100)
          {      
            Serial.print(sensorValue);
            voltage = (sensorValue +0.5) * (VOLTAGE_REFERENCE /  (pow(2,BIT_RESOLUTION)-1)); 
            Serial.print("	");Serial.print(voltage);  
            current    = voltage * (SHUNT_CURRENT /SHUNT_VOLTAGE )  ;
            if(i !=0) averageCurrentValue += current+CORRECTION_FACTOR;
            Serial.print("mV		");Serial.print(current);Serial.println("A");                    
            delay(100);
          }else{
            i--;
          }
        }    
    
        averageCurrentValue /=(ITERATION-1);
        Serial.print("Average Current: ");   
        Serial.print(averageCurrentValue);            
        Serial.println("A");  
        Serial.println();   
        while(DEBUG_ONCE);
    }//printDebug
    
    
    
    
       

    The least I expect from you is to thumb up the video and subscribe to my channel. I appriciate that. .I have spent months making these lectures and writing code. You don't lose anything by subscribging to my channel. Your subscription is stamp of approval to my videos and more people can find them and in it turn it helps me. Thank you

    If you found this tutorial helpful, please support me so I can continue creating content like this. support me via PayPal

    **** AFFILIATE PROGRAM **** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.